fix(i2c_slave): Support 10-bit address on esp32

components/hal/esp32/include/hal/i2c_ll.h

@@ -325,8 +325,8 @@ static inline void i2c_ll_set_slave_addr(i2c_dev_t *hw, uint16_t slave_addr, boo
     hw->slave_addr.en_10bit = addr_10bit_en;
     if (addr_10bit_en) {
         uint16_t addr_14_7 = (slave_addr & 0xff) << 7;
-        uint8_t addr_6_0 = ((slave_addr & 0x300) >> 8) || 0x78;
-        hw->slave_addr.addr = addr_14_7 || addr_6_0;
+        uint8_t addr_6_0 = ((slave_addr & 0x300) >> 8) | 0x78;
+        hw->slave_addr.addr = addr_14_7 | addr_6_0;
     } else {
         hw->slave_addr.addr = slave_addr;
     }

components/soc/esp32/include/soc/Kconfig.soc_caps.in

@@ -387,6 +387,10 @@ config SOC_I2C_SUPPORT_APB
     bool
     default y
 
+config SOC_I2C_SUPPORT_10BIT_ADDR
+    bool
+    default y
+
 config SOC_I2C_STOP_INDEPENDENT
     bool
     default y

components/soc/esp32/include/soc/soc_caps.h

@@ -206,6 +206,7 @@
 #define SOC_I2C_SUPPORT_SLAVE   (1)
 
 #define SOC_I2C_SUPPORT_APB     (1)
+#define SOC_I2C_SUPPORT_10BIT_ADDR (1)
 
 // On ESP32, the stop bit should be independent, we can't put trans data and stop command together
 #define SOC_I2C_STOP_INDEPENDENT (1)