kopia lustrzana https://github.com/espressif/esp-idf
soc/rtc: CPU frequency settings refactoring
Previous APIs used to set CPU frequency used CPU frequencies listed in rtc_cpu_freq_t enumeration. This was problematic for two reasons. First, supporting many possible frequency values obtained by dividing XTAL frequency was hard, as every value would have to be listed in the enumeration. Since different base XTAL frequencies are supported, this further complicated things, since not all of these divided frequencies would be valid for any given XTAL frequency. Second, having to deal with enumeration values often involved switch statements to convert between enumeration and MHz values, handle PLL/XTAL frequencies separately, etc. This change introduces rtc_cpu_freq_config_t structure, which contains CPU frequency (in MHz) and information on how this frequency has to be generated: clock source (XTAL/PLL), source frequency, clock divider value. More fields can be added to this structure in the future. This structure simplifies many parts of the code, since both frequency value and frequency generation settings can be accessed in any place in code without the need for conversions. Additionally, this change adds setting of REF_TICK dividers to support frequencies lower then XTAL with DFS.pull/2261/merge
Ivan Grokhotkov
rodzic
05a5410033
commit
2e31cce390
|
|
@ -75,6 +75,26 @@ typedef enum {
|
|||
RTC_CPU_FREQ_2M = 4, //!< 2 MHz
|
||||
} rtc_cpu_freq_t;
|
||||
|
||||
/**
|
||||
* @brief CPU clock source
|
||||
*/
|
||||
typedef enum {
|
||||
RTC_CPU_FREQ_SRC_XTAL, //!< XTAL
|
||||
RTC_CPU_FREQ_SRC_PLL, //!< PLL (480M or 320M)
|
||||
RTC_CPU_FREQ_SRC_8M, //!< Internal 8M RTC oscillator
|
||||
RTC_CPU_FREQ_SRC_APLL //!< APLL
|
||||
} rtc_cpu_freq_src_t;
|
||||
|
||||
/**
|
||||
* @brief CPU clock configuration structure
|
||||
*/
|
||||
typedef struct {
|
||||
rtc_cpu_freq_src_t source; //!< The clock from which CPU clock is derived
|
||||
uint32_t source_freq_mhz; //!< Source clock frequency
|
||||
uint32_t div; //!< Divider, freq_mhz = source_freq_mhz / div
|
||||
uint32_t freq_mhz; //!< CPU clock frequency
|
||||
} rtc_cpu_freq_config_t;
|
||||
|
||||
/**
|
||||
* @brief RTC SLOW_CLK frequency values
|
||||
*/
|
||||
|
|
@ -108,13 +128,13 @@ typedef enum {
|
|||
* Initialization parameters for rtc_clk_init
|
||||
*/
|
||||
typedef struct {
|
||||
rtc_xtal_freq_t xtal_freq : 8; //!< Main XTAL frequency
|
||||
rtc_cpu_freq_t cpu_freq : 3; //!< CPU frequency to set
|
||||
rtc_fast_freq_t fast_freq : 1; //!< RTC_FAST_CLK frequency to set
|
||||
rtc_slow_freq_t slow_freq : 2; //!< RTC_SLOW_CLK frequency to set
|
||||
uint32_t clk_8m_div : 3; //!< RTC 8M clock divider (division is by clk_8m_div+1, i.e. 0 means 8MHz frequency)
|
||||
uint32_t slow_clk_dcap : 8; //!< RTC 150k clock adjustment parameter (higher value leads to lower frequency)
|
||||
uint32_t clk_8m_dfreq : 8; //!< RTC 8m clock adjustment parameter (higher value leads to higher frequency)
|
||||
rtc_xtal_freq_t xtal_freq : 8; //!< Main XTAL frequency
|
||||
rtc_cpu_freq_t cpu_freq_mhz : 10; //!< CPU frequency to set, in MHz
|
||||
rtc_fast_freq_t fast_freq : 1; //!< RTC_FAST_CLK frequency to set
|
||||
rtc_slow_freq_t slow_freq : 2; //!< RTC_SLOW_CLK frequency to set
|
||||
uint32_t clk_8m_div : 3; //!< RTC 8M clock divider (division is by clk_8m_div+1, i.e. 0 means 8MHz frequency)
|
||||
uint32_t slow_clk_dcap : 8; //!< RTC 150k clock adjustment parameter (higher value leads to lower frequency)
|
||||
uint32_t clk_8m_dfreq : 8; //!< RTC 8m clock adjustment parameter (higher value leads to higher frequency)
|
||||
} rtc_clk_config_t;
|
||||
|
||||
/**
|
||||
|
|
@ -122,7 +142,7 @@ typedef struct {
|
|||
*/
|
||||
#define RTC_CLK_CONFIG_DEFAULT() { \
|
||||
.xtal_freq = RTC_XTAL_FREQ_AUTO, \
|
||||
.cpu_freq = RTC_CPU_FREQ_80M, \
|
||||
.cpu_freq_mhz = 80, \
|
||||
.fast_freq = RTC_FAST_FREQ_8M, \
|
||||
.slow_freq = RTC_SLOW_FREQ_RTC, \
|
||||
.clk_8m_div = 0, \
|
||||
|
|
@ -281,6 +301,9 @@ rtc_fast_freq_t rtc_clk_fast_freq_get();
|
|||
/**
|
||||
* @brief Switch CPU frequency
|
||||
*
|
||||
* @note This function is deprecated and will be removed.
|
||||
* See rtc_clk_cpu_freq_config_set instead.
|
||||
*
|
||||
* If a PLL-derived frequency is requested (80, 160, 240 MHz), this function
|
||||
* will enable the PLL. Otherwise, PLL will be disabled.
|
||||
* Note: this function is not optimized for switching speed. It may take several
|
||||
|
|
@ -288,11 +311,14 @@ rtc_fast_freq_t rtc_clk_fast_freq_get();
|
|||
*
|
||||
* @param cpu_freq new CPU frequency
|
||||
*/
|
||||
void rtc_clk_cpu_freq_set(rtc_cpu_freq_t cpu_freq);
|
||||
void rtc_clk_cpu_freq_set(rtc_cpu_freq_t cpu_freq) __attribute__((deprecated));
|
||||
|
||||
/**
|
||||
* @brief Switch CPU frequency
|
||||
*
|
||||
* @note This function is deprecated and will be removed.
|
||||
* See rtc_clk_cpu_freq_set_config_fast instead.
|
||||
*
|
||||
* This is a faster version of rtc_clk_cpu_freq_set, which can handle some of
|
||||
* the frequency switch paths (XTAL -> PLL, PLL -> XTAL).
|
||||
* When switching from PLL to XTAL, PLL is not disabled (unlike rtc_clk_cpu_freq_set).
|
||||
|
|
@ -307,11 +333,14 @@ void rtc_clk_cpu_freq_set(rtc_cpu_freq_t cpu_freq);
|
|||
*
|
||||
* @param cpu_freq new CPU frequency
|
||||
*/
|
||||
void rtc_clk_cpu_freq_set_fast(rtc_cpu_freq_t cpu_freq);
|
||||
void rtc_clk_cpu_freq_set_fast(rtc_cpu_freq_t cpu_freq) __attribute__((deprecated));
|
||||
|
||||
/**
|
||||
* @brief Get the currently selected CPU frequency
|
||||
*
|
||||
* @note This function is deprecated and will be removed.
|
||||
* See rtc_clk_cpu_freq_get_config instead.
|
||||
*
|
||||
* Although CPU can be clocked by APLL and RTC 8M sources, such support is not
|
||||
* exposed through this library. As such, this function will not return
|
||||
* meaningful values when these clock sources are configured (e.g. using direct
|
||||
|
|
@ -320,22 +349,93 @@ void rtc_clk_cpu_freq_set_fast(rtc_cpu_freq_t cpu_freq);
|
|||
*
|
||||
* @return CPU frequency (one of rtc_cpu_freq_t values)
|
||||
*/
|
||||
rtc_cpu_freq_t rtc_clk_cpu_freq_get();
|
||||
rtc_cpu_freq_t rtc_clk_cpu_freq_get() __attribute__((deprecated));
|
||||
|
||||
/**
|
||||
* @brief Get corresponding frequency value for rtc_cpu_freq_t enum value
|
||||
*
|
||||
* @note This function is deprecated and will be removed.
|
||||
* See rtc_clk_cpu_freq_get/set_config instead.
|
||||
*
|
||||
* @param cpu_freq CPU frequency, on of rtc_cpu_freq_t values
|
||||
* @return CPU frequency, in HZ
|
||||
*/
|
||||
uint32_t rtc_clk_cpu_freq_value(rtc_cpu_freq_t cpu_freq);
|
||||
uint32_t rtc_clk_cpu_freq_value(rtc_cpu_freq_t cpu_freq) __attribute__((deprecated));
|
||||
|
||||
/**
|
||||
* @brief Get rtc_cpu_freq_t enum value for given CPU frequency
|
||||
*
|
||||
* @note This function is deprecated and will be removed.
|
||||
* See rtc_clk_cpu_freq_mhz_to_config instead.
|
||||
*
|
||||
* @param cpu_freq_mhz CPU frequency, one of 80, 160, 240, 2, and XTAL frequency
|
||||
* @param[out] out_val output, rtc_cpu_freq_t value corresponding to the frequency
|
||||
* @return true if the given frequency value matches one of enum values
|
||||
*/
|
||||
bool rtc_clk_cpu_freq_from_mhz(int cpu_freq_mhz, rtc_cpu_freq_t* out_val);
|
||||
bool rtc_clk_cpu_freq_from_mhz(int cpu_freq_mhz, rtc_cpu_freq_t* out_val) __attribute__((deprecated));
|
||||
|
||||
/**
|
||||
* @brief Get CPU frequency config corresponding to a rtc_cpu_freq_t value
|
||||
* @param cpu_freq CPU frequency enumeration value
|
||||
* @param[out] out_config Output, CPU frequency configuration structure
|
||||
*/
|
||||
void rtc_clk_cpu_freq_to_config(rtc_cpu_freq_t cpu_freq, rtc_cpu_freq_config_t* out_config);
|
||||
|
||||
/**
|
||||
* @brief Get CPU frequency config for a given frequency
|
||||
* @param freq_mhz Frequency in MHz
|
||||
* @param[out] out_config Output, CPU frequency configuration structure
|
||||
* @return true if frequency can be obtained, false otherwise
|
||||
*/
|
||||
bool rtc_clk_cpu_freq_mhz_to_config(uint32_t freq_mhz, rtc_cpu_freq_config_t* out_config);
|
||||
|
||||
/**
|
||||
* @brief Switch CPU frequency
|
||||
*
|
||||
* This function sets CPU frequency according to the given configuration
|
||||
* structure. It enables PLLs, if necessary.
|
||||
*
|
||||
* @note This function in not intended to be called by applications in FreeRTOS
|
||||
* environment. This is because it does not adjust various timers based on the
|
||||
* new CPU frequency.
|
||||
*
|
||||
* @param config CPU frequency configuration structure
|
||||
*/
|
||||
void rtc_clk_cpu_freq_set_config(const rtc_cpu_freq_config_t* config);
|
||||
|
||||
/**
|
||||
* @brief Switch CPU frequency (optimized for speed)
|
||||
*
|
||||
* This function is a faster equivalent of rtc_clk_cpu_freq_set_config.
|
||||
* It works faster because it does not disable PLLs when switching from PLL to
|
||||
* XTAL and does not enabled them when switching back. If PLL is not already
|
||||
* enabled when this function is called to switch from XTAL to PLL frequency,
|
||||
* or the PLL which is enabled is the wrong one, this function will fall back
|
||||
* to calling rtc_clk_cpu_freq_set_config.
|
||||
*
|
||||
* Unlike rtc_clk_cpu_freq_set_config, this function relies on static data,
|
||||
* so it is less safe to use it e.g. from a panic handler (when memory might
|
||||
* be corrupted).
|
||||
*
|
||||
* @param config CPU frequency configuration structure
|
||||
*/
|
||||
void rtc_clk_cpu_freq_set_config_fast(const rtc_cpu_freq_config_t* config);
|
||||
|
||||
/**
|
||||
* @brief Get the currently used CPU frequency configuration
|
||||
* @param[out] out_config Output, CPU frequency configuration structure
|
||||
*/
|
||||
void rtc_clk_cpu_freq_get_config(rtc_cpu_freq_config_t* out_config);
|
||||
|
||||
/**
|
||||
* @brief Switch CPU clock source to XTAL
|
||||
*
|
||||
* Short form for filling in rtc_cpu_freq_config_t structure and calling
|
||||
* rtc_clk_cpu_freq_set_config when a switch to XTAL is needed.
|
||||
* Assumes that XTAL frequency has been determined — don't call in startup code.
|
||||
*/
|
||||
void rtc_clk_cpu_freq_set_xtal();
|
||||
|
||||
|
||||
/**
|
||||
* @brief Store new APB frequency value into RTC_APB_FREQ_REG
|
||||
|
|
|
|||
|
|
@ -16,6 +16,7 @@
|
|||
#include <stdint.h>
|
||||
#include <stddef.h>
|
||||
#include <assert.h>
|
||||
#include <stdlib.h>
|
||||
#include "rom/ets_sys.h"
|
||||
#include "rom/rtc.h"
|
||||
#include "rom/uart.h"
|
||||
|
|
@ -98,17 +99,19 @@ static const char* TAG = "rtc_clk";
|
|||
#define DIG_DBIAS_XTAL RTC_CNTL_DBIAS_1V10
|
||||
#define DIG_DBIAS_2M RTC_CNTL_DBIAS_1V00
|
||||
|
||||
/* PLL currently enabled, if any */
|
||||
typedef enum {
|
||||
RTC_PLL_NONE,
|
||||
RTC_PLL_320M,
|
||||
RTC_PLL_480M
|
||||
} rtc_pll_t;
|
||||
static rtc_pll_t s_cur_pll = RTC_PLL_NONE;
|
||||
#define RTC_PLL_FREQ_320M 320
|
||||
#define RTC_PLL_FREQ_480M 480
|
||||
|
||||
/* Current CPU frequency; saved in a variable for faster freq. switching */
|
||||
static rtc_cpu_freq_t s_cur_freq = RTC_CPU_FREQ_XTAL;
|
||||
|
||||
static void rtc_clk_cpu_freq_to_xtal(int freq, int div);
|
||||
static void rtc_clk_cpu_freq_to_8m();
|
||||
static void rtc_clk_bbpll_disable();
|
||||
static void rtc_clk_bbpll_enable();
|
||||
static void rtc_clk_cpu_freq_to_pll_mhz(int cpu_freq_mhz);
|
||||
static bool rtc_clk_cpu_freq_from_mhz_internal(int mhz, rtc_cpu_freq_t* out_val);
|
||||
|
||||
// Current PLL frequency, in MHZ (320 or 480). Zero if PLL is not enabled.
|
||||
static int s_cur_pll_freq;
|
||||
|
||||
static void rtc_clk_32k_enable_internal(int dac, int dres, int dbias)
|
||||
{
|
||||
|
|
@ -275,7 +278,7 @@ rtc_fast_freq_t rtc_clk_fast_freq_get()
|
|||
return REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_FAST_CLK_RTC_SEL);
|
||||
}
|
||||
|
||||
void rtc_clk_bbpll_set(rtc_xtal_freq_t xtal_freq, rtc_cpu_freq_t cpu_freq)
|
||||
void rtc_clk_bbpll_configure(rtc_xtal_freq_t xtal_freq, int pll_freq)
|
||||
{
|
||||
uint8_t div_ref;
|
||||
uint8_t div7_0;
|
||||
|
|
@ -284,7 +287,7 @@ void rtc_clk_bbpll_set(rtc_xtal_freq_t xtal_freq, rtc_cpu_freq_t cpu_freq)
|
|||
uint8_t dcur;
|
||||
uint8_t bw;
|
||||
|
||||
if (cpu_freq != RTC_CPU_FREQ_240M) {
|
||||
if (pll_freq == RTC_PLL_FREQ_320M) {
|
||||
/* Raise the voltage, if needed */
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_80M_160M);
|
||||
/* Configure 320M PLL */
|
||||
|
|
@ -376,96 +379,47 @@ void rtc_clk_bbpll_set(rtc_xtal_freq_t xtal_freq, rtc_cpu_freq_t cpu_freq)
|
|||
uint32_t delay_pll_en = (rtc_clk_slow_freq_get() == RTC_SLOW_FREQ_RTC) ?
|
||||
DELAY_PLL_ENABLE_WITH_150K : DELAY_PLL_ENABLE_WITH_32K;
|
||||
ets_delay_us(delay_pll_en);
|
||||
s_cur_pll_freq = pll_freq;
|
||||
}
|
||||
|
||||
/**
|
||||
* Switch to XTAL frequency. Does not disable the PLL.
|
||||
*/
|
||||
static void rtc_clk_cpu_freq_to_xtal()
|
||||
static void rtc_clk_cpu_freq_to_xtal(int freq, int div)
|
||||
{
|
||||
rtc_xtal_freq_t xtal_freq = rtc_clk_xtal_freq_get();
|
||||
ets_update_cpu_frequency(xtal_freq);
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_XTAL);
|
||||
REG_SET_FIELD(APB_CTRL_SYSCLK_CONF_REG, APB_CTRL_PRE_DIV_CNT, 0);
|
||||
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, RTC_CNTL_SOC_CLK_SEL_XTL);
|
||||
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 0); // clear DPORT_CPUPERIOD_SEL
|
||||
|
||||
rtc_clk_apb_freq_update(xtal_freq * MHZ);
|
||||
s_cur_freq = RTC_CPU_FREQ_XTAL;
|
||||
}
|
||||
|
||||
/**
|
||||
* Switch to one of PLL-based frequencies. Current frequency can be XTAL or PLL.
|
||||
* PLL must already be enabled.
|
||||
* If switching between frequencies derived from different PLLs (320M and 480M),
|
||||
* fall back to rtc_clk_cpu_freq_set.
|
||||
* @param cpu_freq new CPU frequency
|
||||
*/
|
||||
static void rtc_clk_cpu_freq_to_pll(rtc_cpu_freq_t cpu_freq)
|
||||
{
|
||||
int freq = 0;
|
||||
if (s_cur_pll == RTC_PLL_NONE ||
|
||||
(cpu_freq == RTC_CPU_FREQ_240M && s_cur_pll == RTC_PLL_320M) ||
|
||||
(cpu_freq != RTC_CPU_FREQ_240M && s_cur_pll == RTC_PLL_480M)) {
|
||||
/* need to switch PLLs, fall back to full implementation */
|
||||
rtc_clk_cpu_freq_set(cpu_freq);
|
||||
return;
|
||||
}
|
||||
|
||||
if (cpu_freq == RTC_CPU_FREQ_80M) {
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_80M_160M);
|
||||
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 0);
|
||||
freq = 80;
|
||||
} else if (cpu_freq == RTC_CPU_FREQ_160M) {
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_80M_160M);
|
||||
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 1);
|
||||
freq = 160;
|
||||
} else if (cpu_freq == RTC_CPU_FREQ_240M) {
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_240M);
|
||||
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 2);
|
||||
freq = 240;
|
||||
}
|
||||
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, RTC_CNTL_SOC_CLK_SEL_PLL);
|
||||
rtc_clk_apb_freq_update(80 * MHZ);
|
||||
ets_update_cpu_frequency(freq);
|
||||
s_cur_freq = cpu_freq;
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_set_fast(rtc_cpu_freq_t cpu_freq)
|
||||
{
|
||||
if (cpu_freq == s_cur_freq) {
|
||||
return;
|
||||
} else if (cpu_freq == RTC_CPU_FREQ_2M || s_cur_freq == RTC_CPU_FREQ_2M) {
|
||||
/* fall back to full implementation if switch to/from 2M is needed */
|
||||
rtc_clk_cpu_freq_set(cpu_freq);
|
||||
} else if (cpu_freq == RTC_CPU_FREQ_XTAL) {
|
||||
rtc_clk_cpu_freq_to_xtal();
|
||||
} else if (cpu_freq > RTC_CPU_FREQ_XTAL) {
|
||||
rtc_clk_cpu_freq_to_pll(cpu_freq);
|
||||
rtc_clk_wait_for_slow_cycle();
|
||||
/* set divider from XTAL to APB clock */
|
||||
REG_SET_FIELD(APB_CTRL_SYSCLK_CONF_REG, APB_CTRL_PRE_DIV_CNT, div - 1);
|
||||
/* adjust ref_tick */
|
||||
REG_WRITE(APB_CTRL_XTAL_TICK_CONF_REG, freq * MHZ / REF_CLK_FREQ - 1);
|
||||
/* switch clock source */
|
||||
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, RTC_CNTL_SOC_CLK_SEL_XTL);
|
||||
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 0); /* clear DPORT_CPUPERIOD_SEL */
|
||||
rtc_clk_apb_freq_update(freq * MHZ);
|
||||
/* lower the voltage */
|
||||
if (freq <= 2) {
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_2M);
|
||||
} else {
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_XTAL);
|
||||
}
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_set(rtc_cpu_freq_t cpu_freq)
|
||||
static void rtc_clk_cpu_freq_to_8m()
|
||||
{
|
||||
rtc_xtal_freq_t xtal_freq = rtc_clk_xtal_freq_get();
|
||||
/* Switch CPU to XTAL frequency first */
|
||||
ets_update_cpu_frequency(8);
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_XTAL);
|
||||
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, RTC_CNTL_SOC_CLK_SEL_XTL);
|
||||
REG_SET_FIELD(APB_CTRL_SYSCLK_CONF_REG, APB_CTRL_PRE_DIV_CNT, 0);
|
||||
ets_update_cpu_frequency(xtal_freq);
|
||||
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, RTC_CNTL_SOC_CLK_SEL_8M);
|
||||
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, 0); // clear DPORT_CPUPERIOD_SEL
|
||||
rtc_clk_apb_freq_update(RTC_FAST_CLK_FREQ_8M);
|
||||
}
|
||||
|
||||
/* Frequency switch is synchronized to SLOW_CLK cycle. Wait until the switch
|
||||
* is complete before disabling the PLL.
|
||||
*/
|
||||
rtc_clk_wait_for_slow_cycle();
|
||||
|
||||
DPORT_REG_SET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL, 0);
|
||||
static void rtc_clk_bbpll_disable()
|
||||
{
|
||||
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG,
|
||||
RTC_CNTL_BB_I2C_FORCE_PD | RTC_CNTL_BBPLL_FORCE_PD |
|
||||
RTC_CNTL_BBPLL_I2C_FORCE_PD);
|
||||
s_cur_pll = RTC_PLL_NONE;
|
||||
rtc_clk_apb_freq_update(xtal_freq * MHZ);
|
||||
s_cur_pll_freq = 0;
|
||||
|
||||
/* is APLL under force power down? */
|
||||
uint32_t apll_fpd = REG_GET_FIELD(RTC_CNTL_ANA_CONF_REG, RTC_CNTL_PLLA_FORCE_PD);
|
||||
|
|
@ -473,76 +427,73 @@ void rtc_clk_cpu_freq_set(rtc_cpu_freq_t cpu_freq)
|
|||
/* then also power down the internal I2C bus */
|
||||
SET_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG, RTC_CNTL_BIAS_I2C_FORCE_PD);
|
||||
}
|
||||
/* now switch to the desired frequency */
|
||||
if (cpu_freq == RTC_CPU_FREQ_XTAL) {
|
||||
/* already at XTAL, nothing to do */
|
||||
} else if (cpu_freq == RTC_CPU_FREQ_2M) {
|
||||
/* set up divider to produce 2MHz from XTAL */
|
||||
REG_SET_FIELD(APB_CTRL_SYSCLK_CONF_REG, APB_CTRL_PRE_DIV_CNT, (xtal_freq / 2) - 1);
|
||||
ets_update_cpu_frequency(2);
|
||||
rtc_clk_apb_freq_update(2 * MHZ);
|
||||
/* lower the voltage */
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, DIG_DBIAS_2M);
|
||||
}
|
||||
|
||||
static void rtc_clk_bbpll_enable()
|
||||
{
|
||||
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG,
|
||||
RTC_CNTL_BIAS_I2C_FORCE_PD | RTC_CNTL_BB_I2C_FORCE_PD |
|
||||
RTC_CNTL_BBPLL_FORCE_PD | RTC_CNTL_BBPLL_I2C_FORCE_PD);
|
||||
}
|
||||
|
||||
/**
|
||||
* Switch to one of PLL-based frequencies. Current frequency can be XTAL or PLL.
|
||||
* PLL must already be enabled.
|
||||
* @param cpu_freq new CPU frequency
|
||||
*/
|
||||
static void rtc_clk_cpu_freq_to_pll_mhz(int cpu_freq_mhz)
|
||||
{
|
||||
int dbias = DIG_DBIAS_80M_160M;
|
||||
int per_conf = 0;
|
||||
if (cpu_freq_mhz == 80) {
|
||||
/* nothing to do */
|
||||
} else if (cpu_freq_mhz == 160) {
|
||||
per_conf = 1;
|
||||
} else if (cpu_freq_mhz == 240) {
|
||||
dbias = DIG_DBIAS_240M;
|
||||
per_conf = 2;
|
||||
} else {
|
||||
/* use PLL as clock source */
|
||||
CLEAR_PERI_REG_MASK(RTC_CNTL_OPTIONS0_REG,
|
||||
RTC_CNTL_BIAS_I2C_FORCE_PD | RTC_CNTL_BB_I2C_FORCE_PD |
|
||||
RTC_CNTL_BBPLL_FORCE_PD | RTC_CNTL_BBPLL_I2C_FORCE_PD);
|
||||
rtc_clk_bbpll_set(xtal_freq, cpu_freq);
|
||||
if (cpu_freq == RTC_CPU_FREQ_80M) {
|
||||
DPORT_REG_SET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL, 0);
|
||||
ets_update_cpu_frequency(80);
|
||||
s_cur_pll = RTC_PLL_320M;
|
||||
} else if (cpu_freq == RTC_CPU_FREQ_160M) {
|
||||
DPORT_REG_SET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL, 1);
|
||||
ets_update_cpu_frequency(160);
|
||||
s_cur_pll = RTC_PLL_320M;
|
||||
} else if (cpu_freq == RTC_CPU_FREQ_240M) {
|
||||
DPORT_REG_SET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL, 2);
|
||||
ets_update_cpu_frequency(240);
|
||||
s_cur_pll = RTC_PLL_480M;
|
||||
}
|
||||
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, RTC_CNTL_SOC_CLK_SEL_PLL);
|
||||
rtc_clk_wait_for_slow_cycle();
|
||||
rtc_clk_apb_freq_update(80 * MHZ);
|
||||
assert(false && "invalid frequency");
|
||||
}
|
||||
s_cur_freq = cpu_freq;
|
||||
DPORT_REG_WRITE(DPORT_CPU_PER_CONF_REG, per_conf);
|
||||
REG_SET_FIELD(RTC_CNTL_REG, RTC_CNTL_DIG_DBIAS_WAK, dbias);
|
||||
REG_SET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL, RTC_CNTL_SOC_CLK_SEL_PLL);
|
||||
rtc_clk_apb_freq_update(80 * MHZ);
|
||||
ets_update_cpu_frequency(cpu_freq_mhz);
|
||||
rtc_clk_wait_for_slow_cycle();
|
||||
}
|
||||
|
||||
|
||||
void rtc_clk_cpu_freq_set(rtc_cpu_freq_t cpu_freq)
|
||||
{
|
||||
rtc_cpu_freq_config_t config;
|
||||
rtc_clk_cpu_freq_to_config(cpu_freq, &config);
|
||||
rtc_clk_cpu_freq_set_config(&config);
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_set_fast(rtc_cpu_freq_t cpu_freq)
|
||||
{
|
||||
rtc_cpu_freq_config_t config;
|
||||
rtc_clk_cpu_freq_to_config(cpu_freq, &config);
|
||||
rtc_clk_cpu_freq_set_config_fast(&config);
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_set_xtal()
|
||||
{
|
||||
int freq_mhz = (int) rtc_clk_xtal_freq_get();
|
||||
|
||||
rtc_clk_cpu_freq_to_xtal(freq_mhz, 1);
|
||||
rtc_clk_wait_for_slow_cycle();
|
||||
rtc_clk_bbpll_disable();
|
||||
}
|
||||
|
||||
rtc_cpu_freq_t rtc_clk_cpu_freq_get()
|
||||
{
|
||||
uint32_t soc_clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL);
|
||||
switch (soc_clk_sel) {
|
||||
case RTC_CNTL_SOC_CLK_SEL_XTL: {
|
||||
uint32_t pre_div = REG_GET_FIELD(APB_CTRL_SYSCLK_CONF_REG, APB_CTRL_PRE_DIV_CNT);
|
||||
if (pre_div == 0) {
|
||||
return RTC_CPU_FREQ_XTAL;
|
||||
} else if (pre_div == rtc_clk_xtal_freq_get() / 2 - 1) {
|
||||
return RTC_CPU_FREQ_2M;
|
||||
} else {
|
||||
assert(false && "unsupported frequency");
|
||||
}
|
||||
break;
|
||||
}
|
||||
case RTC_CNTL_SOC_CLK_SEL_PLL: {
|
||||
uint32_t cpuperiod_sel = DPORT_REG_GET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL);
|
||||
if (cpuperiod_sel == 0) {
|
||||
return RTC_CPU_FREQ_80M;
|
||||
} else if (cpuperiod_sel == 1) {
|
||||
return RTC_CPU_FREQ_160M;
|
||||
} else if (cpuperiod_sel == 2) {
|
||||
return RTC_CPU_FREQ_240M;
|
||||
} else {
|
||||
assert(false && "unsupported frequency");
|
||||
}
|
||||
break;
|
||||
}
|
||||
case RTC_CNTL_SOC_CLK_SEL_APLL:
|
||||
case RTC_CNTL_SOC_CLK_SEL_8M:
|
||||
default:
|
||||
assert(false && "unsupported frequency");
|
||||
}
|
||||
return RTC_CNTL_SOC_CLK_SEL_XTL;
|
||||
rtc_cpu_freq_config_t config;
|
||||
rtc_clk_cpu_freq_get_config(&config);
|
||||
rtc_cpu_freq_t freq;
|
||||
rtc_clk_cpu_freq_from_mhz_internal(config.freq_mhz, &freq);
|
||||
return freq;
|
||||
}
|
||||
|
||||
uint32_t rtc_clk_cpu_freq_value(rtc_cpu_freq_t cpu_freq)
|
||||
|
|
@ -564,7 +515,7 @@ uint32_t rtc_clk_cpu_freq_value(rtc_cpu_freq_t cpu_freq)
|
|||
}
|
||||
}
|
||||
|
||||
bool rtc_clk_cpu_freq_from_mhz(int mhz, rtc_cpu_freq_t* out_val)
|
||||
static bool rtc_clk_cpu_freq_from_mhz_internal(int mhz, rtc_cpu_freq_t* out_val)
|
||||
{
|
||||
if (mhz == 240) {
|
||||
*out_val = RTC_CPU_FREQ_240M;
|
||||
|
|
@ -582,6 +533,200 @@ bool rtc_clk_cpu_freq_from_mhz(int mhz, rtc_cpu_freq_t* out_val)
|
|||
return true;
|
||||
}
|
||||
|
||||
bool rtc_clk_cpu_freq_from_mhz(int mhz, rtc_cpu_freq_t* out_val)
|
||||
{
|
||||
return rtc_clk_cpu_freq_from_mhz_internal(mhz, out_val);
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_to_config(rtc_cpu_freq_t cpu_freq, rtc_cpu_freq_config_t* out_config)
|
||||
{
|
||||
uint32_t source_freq_mhz;
|
||||
rtc_cpu_freq_src_t source;
|
||||
uint32_t freq_mhz;
|
||||
uint32_t divider;
|
||||
|
||||
switch (cpu_freq) {
|
||||
case RTC_CPU_FREQ_XTAL:
|
||||
case RTC_CPU_FREQ_2M:
|
||||
source_freq_mhz = rtc_clk_xtal_freq_get();
|
||||
source = RTC_CPU_FREQ_SRC_XTAL;
|
||||
if (cpu_freq == RTC_CPU_FREQ_2M) {
|
||||
freq_mhz = 2;
|
||||
divider = out_config->source_freq_mhz / 2;
|
||||
} else {
|
||||
freq_mhz = source_freq_mhz;
|
||||
divider = 1;
|
||||
}
|
||||
break;
|
||||
case RTC_CPU_FREQ_80M:
|
||||
source = RTC_CPU_FREQ_SRC_PLL;
|
||||
source_freq_mhz = RTC_PLL_FREQ_320M;
|
||||
divider = 4;
|
||||
freq_mhz = 80;
|
||||
break;
|
||||
case RTC_CPU_FREQ_160M:
|
||||
source = RTC_CPU_FREQ_SRC_PLL;
|
||||
source_freq_mhz = RTC_PLL_FREQ_320M;
|
||||
divider = 2;
|
||||
freq_mhz = 160;
|
||||
break;
|
||||
case RTC_CPU_FREQ_240M:
|
||||
source = RTC_CPU_FREQ_SRC_PLL;
|
||||
source_freq_mhz = RTC_PLL_FREQ_480M;
|
||||
divider = 2;
|
||||
freq_mhz = 240;
|
||||
break;
|
||||
default:
|
||||
assert(false && "invalid rtc_cpu_freq_t value");
|
||||
abort();
|
||||
}
|
||||
|
||||
*out_config = (rtc_cpu_freq_config_t) {
|
||||
.source = source,
|
||||
.source_freq_mhz = source_freq_mhz,
|
||||
.div = divider,
|
||||
.freq_mhz = freq_mhz
|
||||
};
|
||||
}
|
||||
|
||||
bool rtc_clk_cpu_freq_mhz_to_config(uint32_t freq_mhz, rtc_cpu_freq_config_t* out_config)
|
||||
{
|
||||
uint32_t source_freq_mhz;
|
||||
rtc_cpu_freq_src_t source;
|
||||
uint32_t divider;
|
||||
uint32_t real_freq_mhz;
|
||||
|
||||
uint32_t xtal_freq = (uint32_t) rtc_clk_xtal_freq_get();
|
||||
if (freq_mhz <= xtal_freq) {
|
||||
divider = xtal_freq / freq_mhz;
|
||||
real_freq_mhz = (xtal_freq + divider / 2) / divider; /* round */
|
||||
if (real_freq_mhz != freq_mhz) {
|
||||
SOC_LOGW(TAG, "can't find divider to generate %d MHz from %d MHz XTAL",
|
||||
freq_mhz, xtal_freq);
|
||||
return false;
|
||||
}
|
||||
|
||||
source_freq_mhz = xtal_freq;
|
||||
source = RTC_CPU_FREQ_SRC_XTAL;
|
||||
} else if (freq_mhz == 80) {
|
||||
real_freq_mhz = freq_mhz;
|
||||
source = RTC_CPU_FREQ_SRC_PLL;
|
||||
source_freq_mhz = RTC_PLL_FREQ_320M;
|
||||
divider = 4;
|
||||
} else if (freq_mhz == 160) {
|
||||
real_freq_mhz = freq_mhz;
|
||||
source = RTC_CPU_FREQ_SRC_PLL;
|
||||
source_freq_mhz = RTC_PLL_FREQ_320M;
|
||||
divider = 2;
|
||||
} else if (freq_mhz == 240) {
|
||||
real_freq_mhz = freq_mhz;
|
||||
source = RTC_CPU_FREQ_SRC_PLL;
|
||||
source_freq_mhz = RTC_PLL_FREQ_480M;
|
||||
divider = 2;
|
||||
} else {
|
||||
SOC_LOGW(TAG, "unsupported frequency: %d", freq_mhz);
|
||||
return false;
|
||||
}
|
||||
*out_config = (rtc_cpu_freq_config_t) {
|
||||
.source = source,
|
||||
.div = divider,
|
||||
.source_freq_mhz = source_freq_mhz,
|
||||
.freq_mhz = real_freq_mhz
|
||||
};
|
||||
return true;
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_set_config(const rtc_cpu_freq_config_t* config)
|
||||
{
|
||||
rtc_xtal_freq_t xtal_freq = rtc_clk_xtal_freq_get();
|
||||
uint32_t soc_clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL);
|
||||
if (soc_clk_sel != RTC_CNTL_SOC_CLK_SEL_XTL) {
|
||||
rtc_clk_cpu_freq_to_xtal(xtal_freq, 1);
|
||||
rtc_clk_wait_for_slow_cycle();
|
||||
}
|
||||
if (soc_clk_sel == RTC_CNTL_SOC_CLK_SEL_PLL) {
|
||||
rtc_clk_bbpll_disable();
|
||||
}
|
||||
if (config->source == RTC_CPU_FREQ_SRC_XTAL) {
|
||||
if (config->div > 1) {
|
||||
rtc_clk_cpu_freq_to_xtal(config->freq_mhz, config->div);
|
||||
}
|
||||
} else if (config->source == RTC_CPU_FREQ_SRC_PLL) {
|
||||
rtc_clk_bbpll_enable();
|
||||
rtc_clk_wait_for_slow_cycle();
|
||||
rtc_clk_bbpll_configure(rtc_clk_xtal_freq_get(), config->source_freq_mhz);
|
||||
rtc_clk_cpu_freq_to_pll_mhz(config->freq_mhz);
|
||||
} else if (config->source == RTC_CPU_FREQ_SRC_8M) {
|
||||
rtc_clk_cpu_freq_to_8m();
|
||||
}
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_get_config(rtc_cpu_freq_config_t* out_config)
|
||||
{
|
||||
rtc_cpu_freq_src_t source;
|
||||
uint32_t source_freq_mhz;
|
||||
uint32_t div;
|
||||
uint32_t freq_mhz;
|
||||
uint32_t soc_clk_sel = REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL);
|
||||
switch (soc_clk_sel) {
|
||||
case RTC_CNTL_SOC_CLK_SEL_XTL: {
|
||||
source = RTC_CPU_FREQ_SRC_XTAL;
|
||||
div = REG_GET_FIELD(APB_CTRL_SYSCLK_CONF_REG, APB_CTRL_PRE_DIV_CNT) + 1;
|
||||
source_freq_mhz = (uint32_t) rtc_clk_xtal_freq_get();
|
||||
freq_mhz = source_freq_mhz / div;
|
||||
}
|
||||
break;
|
||||
case RTC_CNTL_SOC_CLK_SEL_PLL: {
|
||||
source = RTC_CPU_FREQ_SRC_PLL;
|
||||
uint32_t cpuperiod_sel = DPORT_REG_GET_FIELD(DPORT_CPU_PER_CONF_REG, DPORT_CPUPERIOD_SEL);
|
||||
if (cpuperiod_sel == 0) {
|
||||
source_freq_mhz = RTC_PLL_FREQ_320M;
|
||||
div = 4;
|
||||
freq_mhz = 80;
|
||||
} else if (cpuperiod_sel == 1) {
|
||||
source_freq_mhz = RTC_PLL_FREQ_320M;
|
||||
div = 2;
|
||||
freq_mhz = 160;
|
||||
} else if (cpuperiod_sel == 2) {
|
||||
source_freq_mhz = RTC_PLL_FREQ_480M;
|
||||
div = 2;
|
||||
freq_mhz = 240;
|
||||
} else {
|
||||
assert(false && "unsupported frequency configuration");
|
||||
}
|
||||
break;
|
||||
}
|
||||
case RTC_CNTL_SOC_CLK_SEL_8M:
|
||||
source = RTC_CPU_FREQ_SRC_8M;
|
||||
source_freq_mhz = 8;
|
||||
div = 1;
|
||||
freq_mhz = source_freq_mhz;
|
||||
break;
|
||||
case RTC_CNTL_SOC_CLK_SEL_APLL:
|
||||
default:
|
||||
assert(false && "unsupported frequency configuration");
|
||||
}
|
||||
*out_config = (rtc_cpu_freq_config_t) {
|
||||
.source = source,
|
||||
.source_freq_mhz = source_freq_mhz,
|
||||
.div = div,
|
||||
.freq_mhz = freq_mhz
|
||||
};
|
||||
}
|
||||
|
||||
void rtc_clk_cpu_freq_set_config_fast(const rtc_cpu_freq_config_t* config)
|
||||
{
|
||||
if (config->source == RTC_CPU_FREQ_SRC_XTAL) {
|
||||
rtc_clk_cpu_freq_to_xtal(config->freq_mhz, config->div);
|
||||
} else if (config->source == RTC_CPU_FREQ_SRC_PLL &&
|
||||
s_cur_pll_freq == config->source_freq_mhz) {
|
||||
rtc_clk_cpu_freq_to_pll_mhz(config->freq_mhz);
|
||||
} else {
|
||||
/* fallback */
|
||||
rtc_clk_cpu_freq_set_config(config);
|
||||
}
|
||||
}
|
||||
|
||||
/* Values of RTC_XTAL_FREQ_REG and RTC_APB_FREQ_REG are stored as two copies in
|
||||
* lower and upper 16-bit halves. These are the routines to work with such a
|
||||
* representation.
|
||||
|
|
@ -669,8 +814,8 @@ uint32_t rtc_clk_apb_freq_get()
|
|||
|
||||
void rtc_clk_init(rtc_clk_config_t cfg)
|
||||
{
|
||||
rtc_cpu_freq_t cpu_source_before = rtc_clk_cpu_freq_get();
|
||||
|
||||
rtc_cpu_freq_config_t old_config, new_config;
|
||||
|
||||
/* If we get a TG WDT system reset while running at 240MHz,
|
||||
* DPORT_CPUPERIOD_SEL register will be reset to 0 resulting in 120MHz
|
||||
* APB and CPU frequencies after reset. This will cause issues with XTAL
|
||||
|
|
@ -681,7 +826,11 @@ void rtc_clk_init(rtc_clk_config_t cfg)
|
|||
* run the following code than querying the PLL does.
|
||||
*/
|
||||
if (REG_GET_FIELD(RTC_CNTL_CLK_CONF_REG, RTC_CNTL_SOC_CLK_SEL) == RTC_CNTL_SOC_CLK_SEL_PLL) {
|
||||
rtc_clk_cpu_freq_set(RTC_CPU_FREQ_XTAL);
|
||||
/* We don't know actual XTAL frequency yet, assume 40MHz.
|
||||
* REF_TICK divider will be corrected below, one XTAL frequency is
|
||||
* determined.
|
||||
*/
|
||||
rtc_clk_cpu_freq_to_xtal(40, 1);
|
||||
}
|
||||
|
||||
/* Set tuning parameters for 8M and 150k clocks.
|
||||
|
|
@ -721,6 +870,7 @@ void rtc_clk_init(rtc_clk_config_t cfg)
|
|||
* frequency is different. If autodetection failed, worst case we get a
|
||||
* bit of garbage output.
|
||||
*/
|
||||
|
||||
rtc_xtal_freq_t est_xtal_freq = rtc_clk_xtal_freq_estimate();
|
||||
if (est_xtal_freq != xtal_freq) {
|
||||
SOC_LOGW(TAG, "Possibly invalid CONFIG_ESP32_XTAL_FREQ setting (%dMHz). Detected %d MHz.",
|
||||
|
|
@ -730,13 +880,21 @@ void rtc_clk_init(rtc_clk_config_t cfg)
|
|||
uart_tx_wait_idle(0);
|
||||
rtc_clk_xtal_freq_update(xtal_freq);
|
||||
rtc_clk_apb_freq_update(xtal_freq * MHZ);
|
||||
|
||||
/* Set CPU frequency */
|
||||
rtc_clk_cpu_freq_set(cfg.cpu_freq);
|
||||
|
||||
rtc_clk_cpu_freq_get_config(&old_config);
|
||||
uint32_t freq_before = old_config.freq_mhz;
|
||||
|
||||
bool res = rtc_clk_cpu_freq_mhz_to_config(cfg.cpu_freq_mhz, &new_config);
|
||||
assert(res && "invalid CPU frequency value");
|
||||
|
||||
/* Configure REF_TICK */
|
||||
REG_WRITE(APB_CTRL_XTAL_TICK_CONF_REG, xtal_freq - 1);
|
||||
REG_WRITE(APB_CTRL_PLL_TICK_CONF_REG, APB_CLK_FREQ / MHZ - 1); /* Under PLL, APB frequency is always 80MHz */
|
||||
|
||||
/* Re-calculate the ccount to make time calculation correct. */
|
||||
uint32_t freq_before = rtc_clk_cpu_freq_value(cpu_source_before) / MHZ;
|
||||
uint32_t freq_after = rtc_clk_cpu_freq_value(cfg.cpu_freq) / MHZ;
|
||||
XTHAL_SET_CCOUNT( XTHAL_GET_CCOUNT() * freq_after / freq_before );
|
||||
XTHAL_SET_CCOUNT( XTHAL_GET_CCOUNT() * cfg.cpu_freq_mhz / freq_before );
|
||||
|
||||
/* Slow & fast clocks setup */
|
||||
if (cfg.slow_freq == RTC_SLOW_FREQ_32K_XTAL) {
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue