ledc: Add check for whether the registered callback is in iram in ledc_cb_register

components/driver/ledc.c

@@ -20,6 +20,7 @@
 #include "esp_rom_sys.h"
 #include "clk_ctrl_os.h"
 #include "esp_private/periph_ctrl.h"
+#include "esp_memory_utils.h"
 
 static __attribute__((unused)) const char *LEDC_TAG = "ledc";
 
@@ -1236,8 +1237,15 @@ esp_err_t ledc_cb_register(ledc_mode_t speed_mode, ledc_channel_t channel, ledc_
 {
     LEDC_ARG_CHECK(speed_mode < LEDC_SPEED_MODE_MAX, "speed_mode");
     LEDC_ARG_CHECK(channel < LEDC_CHANNEL_MAX, "channel");
+    LEDC_ARG_CHECK(cbs, "callback");
     LEDC_CHECK(p_ledc_obj[speed_mode] != NULL, LEDC_NOT_INIT, ESP_ERR_INVALID_STATE);
     LEDC_CHECK(ledc_fade_channel_init_check(speed_mode, channel) == ESP_OK, LEDC_FADE_INIT_ERROR_STR, ESP_FAIL);
+    if (cbs->fade_cb && !esp_ptr_in_iram(cbs->fade_cb)) {
+        ESP_LOGW(LEDC_TAG, "fade callback not in IRAM");
+    }
+    if (user_arg && !esp_ptr_internal(user_arg)) {
+        ESP_LOGW(LEDC_TAG, "user context not in internal RAM");
+    }
     s_ledc_fade_rec[speed_mode][channel]->ledc_fade_callback = cbs->fade_cb;
     s_ledc_fade_rec[speed_mode][channel]->cb_user_arg = user_arg;
     return ESP_OK;

docs/en/api-reference/peripherals/ledc.rst

@@ -254,7 +254,7 @@ The LEDC hardware provides the means to gradually transition from one duty cycle
 
     Start fading with :cpp:func:`ledc_fade_start`. A fade can be operated in blocking or non-blocking mode, please check :cpp:enum:`ledc_fade_mode_t` for the difference between the two available fade modes. Note that with either fade mode, the next fade or fixed-duty update will not take effect until the last fade finishes or is stopped. :cpp:func:`ledc_fade_stop` has to be called to stop a fade that is in progress.
 
-To get a notification about the completion of a fade operation, a fade end callback function can be registered for each channel by calling :cpp:func:`ledc_cb_register` after the fade service being installed. The fade end callback prototype is defined in :cpp:type:`ledc_cb_t`, where you should return a boolean value from the callback function, indicating whether a high priority task is woken up by this callback function.
+To get a notification about the completion of a fade operation, a fade end callback function can be registered for each channel by calling :cpp:func:`ledc_cb_register` after the fade service being installed. The fade end callback prototype is defined in :cpp:type:`ledc_cb_t`, where you should return a boolean value from the callback function, indicating whether a high priority task is woken up by this callback function. It is worth mentioning, the callback and the function invoked by itself should be placed in IRAM, as the interrupt service routine is in IRAM. :cpp:func:`ledc_cb_register` will print a warning message if it finds the addresses of callback and user context are incorrect.
 
 If not required anymore, fading and an associated interrupt can be disabled with :cpp:func:`ledc_fade_func_uninstall`.
 

docs/zh_CN/api-reference/peripherals/ledc.rst

@@ -254,7 +254,7 @@ LED PWM 控制器硬件可逐渐改变占空比的数值。要使用此功能，
 
     最后需要调用 :cpp:func:`ledc_fade_start` 开启渐变。渐变可以在阻塞或非阻塞模式下运行，具体区别请查看 :cpp:enum:`ledc_fade_mode_t`。需要特别注意的是，不管在哪种模式下，下一次渐变或是单次占空比配置的指令生效都必须等到前一次渐变完成或被中止。中止一个正在运行中的渐变需要调用函数 :cpp:func:`ledc_fade_stop`。
 
-此外，在使能渐变后，每个通道都可以额外通过调用 :cpp:func:`ledc_cb_register` 注册一个回调函数用以获得渐变完成的事件通知。
+此外，在使能渐变后，每个通道都可以额外通过调用 :cpp:func:`ledc_cb_register` 注册一个回调函数用以获得渐变完成的事件通知。回调函数的原型被定义在 :cpp:type:`ledc_cb_t`。每个回调函数都应当返回一个布尔值给驱动的中断处理函数，用以表示是否有高优先级任务被其唤醒。此外，值得注意的是，由于驱动的中断处理函数被放在了 IRAM 中， 回调函数和其调用的函数也需要被放在 IRAM 中。 :cpp:func:`ledc_cb_register` 会检查回调函数及函数上下文的指针地址是否在正确的存储区域。
 
 如不需要渐变和渐变中断，可用函数 :cpp:func:`ledc_fade_func_uninstall` 关闭。