From b2409b1d3470a55df06530c9dc75d2ae7007d4ab Mon Sep 17 00:00:00 2001 From: Armando Date: Thu, 6 May 2021 10:21:33 +0800 Subject: [PATCH] essl: remove chip related comments in essl.h --- .../include/esp_serial_slave_link/essl.h | 52 +++++++++---------- .../include/esp_serial_slave_link/essl_sdio.h | 26 +++++----- 2 files changed, 39 insertions(+), 39 deletions(-) diff --git a/components/esp_serial_slave_link/include/esp_serial_slave_link/essl.h b/components/esp_serial_slave_link/include/esp_serial_slave_link/essl.h index 82e91778df..ef25a84b99 100644 --- a/components/esp_serial_slave_link/include/esp_serial_slave_link/essl.h +++ b/components/esp_serial_slave_link/include/esp_serial_slave_link/essl.h @@ -29,15 +29,15 @@ typedef struct essl_dev_t* essl_handle_t; /** * @brief Initialize the slave. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * @return ESP_OK if success, or other value returned from lower layer `init`. */ esp_err_t essl_init(essl_handle_t handle, uint32_t wait_ms); -/** Wait for interrupt of a ESP32 slave device. +/** Wait for interrupt of an ESP slave device. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * * @return @@ -48,8 +48,8 @@ esp_err_t essl_wait_for_ready(essl_handle_t handle, uint32_t wait_ms); /** Get buffer num for the host to send data to the slave. The buffers are size of ``buffer_size``. * - * @param handle Handle of a ``essl`` device. - * @param out_tx_num Output of buffer num that host can send data to ESP32 slave. + * @param handle Handle of an ESSL device. + * @param out_tx_num Output of buffer num that host can send data to an ESP slave. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * * @return @@ -58,9 +58,9 @@ esp_err_t essl_wait_for_ready(essl_handle_t handle, uint32_t wait_ms); */ esp_err_t essl_get_tx_buffer_num(essl_handle_t handle, uint32_t *out_tx_num, uint32_t wait_ms); -/** Get amount of data the ESP32 slave preparing to send to host. +/** Get amount of data the ESP slave preparing to send to host. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param out_rx_size Output of data size to read from slave. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * @@ -73,13 +73,13 @@ esp_err_t essl_get_rx_data_size(essl_handle_t handle, uint32_t *out_rx_size, uin /** Reset the counters of this component. Usually you don't need to do this unless you know the slave is reset. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. */ esp_err_t essl_reset_cnt(essl_handle_t handle); -/** Send a packet to the ESP32 slave. The slave receive the packet into buffers whose size is ``buffer_size`` (configured during initialization). +/** Send a packet to the ESP slave. The slave receive the packet into buffers whose size is ``buffer_size`` (configured during initialization). * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param start Start address of the packet to send * @param length Length of data to send, if the packet is over-size, the it will be divided into blocks and hold into different buffers automatically. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. @@ -91,9 +91,9 @@ esp_err_t essl_reset_cnt(essl_handle_t handle); */ esp_err_t essl_send_packet(essl_handle_t handle, const void *start, size_t length, uint32_t wait_ms); -/** Get a packet from ESP32 slave. +/** Get a packet from an ESP slave. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param[out] out_data Data output address * @param size The size of the output buffer, if the buffer is smaller than the size of data to receive from slave, the driver returns ``ESP_ERR_NOT_FINISHED`` * @param[out] out_length Output of length the data actually received from slave. @@ -106,9 +106,9 @@ esp_err_t essl_send_packet(essl_handle_t handle, const void *start, size_t lengt */ esp_err_t essl_get_packet(essl_handle_t handle, void *out_data, size_t size, size_t *out_length, uint32_t wait_ms); -/** Write general purpose R/W registers (8-bit) of ESP32 slave. +/** Write general purpose R/W registers (8-bit) of an ESP slave. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param addr Address of register to write. Valid address: 0-59. * @param value Value to write to the register. * @param value_o Output of the returned written value. @@ -123,9 +123,9 @@ esp_err_t essl_get_packet(essl_handle_t handle, void *out_data, size_t size, siz */ esp_err_t essl_write_reg(essl_handle_t handle, uint8_t addr, uint8_t value, uint8_t *value_o, uint32_t wait_ms); -/** Read general purpose R/W registers (8-bit) of ESP32 slave. +/** Read general purpose R/W registers (8-bit) of an ESP slave. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param add Address of register to read. Valid address: 0-27, 32-63 (28-31 reserved, return interrupt bits on read). * @param value_o Output value read from the register. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. @@ -139,7 +139,7 @@ esp_err_t essl_read_reg(essl_handle_t handle, uint8_t add, uint8_t *value_o, uin /** wait for an interrupt of the slave * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * * @return @@ -149,9 +149,9 @@ esp_err_t essl_read_reg(essl_handle_t handle, uint8_t add, uint8_t *value_o, uin */ esp_err_t essl_wait_int(essl_handle_t handle, uint32_t wait_ms); -/** Clear interrupt bits of ESP32 slave. All the bits set in the mask will be cleared, while other bits will stay the same. +/** Clear interrupt bits of an ESP slave. All the bits set in the mask will be cleared, while other bits will stay the same. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param intr_mask Mask of interrupt bits to clear. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * @@ -161,9 +161,9 @@ esp_err_t essl_wait_int(essl_handle_t handle, uint32_t wait_ms); */ esp_err_t essl_clear_intr(essl_handle_t handle, uint32_t intr_mask, uint32_t wait_ms); -/** Get interrupt bits of ESP32 slave. +/** Get interrupt bits of an ESP slave. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param intr_raw Output of the raw interrupt bits. Set to NULL if only masked bits are read. * @param intr_st Output of the masked interrupt bits. set to NULL if only raw bits are read. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. @@ -175,9 +175,9 @@ esp_err_t essl_clear_intr(essl_handle_t handle, uint32_t intr_mask, uint32_t wai */ esp_err_t essl_get_intr(essl_handle_t handle, uint32_t *intr_raw, uint32_t *intr_st, uint32_t wait_ms); -/** Set interrupt enable bits of ESP32 slave. The slave only sends interrupt on the line when there is a bit both the raw status and the enable are set. +/** Set interrupt enable bits of an ESP slave. The slave only sends interrupt on the line when there is a bit both the raw status and the enable are set. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param ena_mask Mask of the interrupt bits to enable. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * @@ -187,9 +187,9 @@ esp_err_t essl_get_intr(essl_handle_t handle, uint32_t *intr_raw, uint32_t *intr */ esp_err_t essl_set_intr_ena(essl_handle_t handle, uint32_t ena_mask, uint32_t wait_ms); -/** Get interrupt enable bits of ESP32 slave. +/** Get interrupt enable bits of an ESP slave. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param ena_mask_o Output of interrupt bit enable mask. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * @@ -201,7 +201,7 @@ esp_err_t essl_get_intr_ena(essl_handle_t handle, uint32_t *ena_mask_o, uint32_t /** Send interrupts to slave. Each bit of the interrupt will be triggered. * - * @param handle Handle of a ``essl`` device. + * @param handle Handle of an ESSL device. * @param intr_mask Mask of interrupt bits to send to slave. * @param wait_ms Millisecond to wait before timeout, will not wait at all if set to 0-9. * diff --git a/components/esp_serial_slave_link/include/esp_serial_slave_link/essl_sdio.h b/components/esp_serial_slave_link/include/esp_serial_slave_link/essl_sdio.h index 93fa2823c2..c98ae0344f 100644 --- a/components/esp_serial_slave_link/include/esp_serial_slave_link/essl_sdio.h +++ b/components/esp_serial_slave_link/include/esp_serial_slave_link/essl_sdio.h @@ -12,7 +12,7 @@ // See the License for the specific language governing permissions and // limitations under the License. -// ESP SDIO slave link used by the ESP host to communicate with ESP32 SDIO slave. +// ESP SDIO slave link used by the ESP host to communicate with ESP SDIO slave. #pragma once @@ -22,7 +22,7 @@ #include "freertos/task.h" #include "driver/sdmmc_defs.h" -/// Configuration for the essl SDIO device +/// Configuration for the ESSL SDIO device typedef struct { sdmmc_card_t *card; ///< The initialized sdmmc card pointer of the slave. int recv_buffer_size; ///< The pre-negotiated recv buffer size used by both the host and the slave. @@ -52,7 +52,7 @@ esp_err_t essl_sdio_deinit_dev(essl_handle_t handle); //Please call `essl_` functions witout `sdio` instead of calling these functions directly. /** @cond */ /** - * SDIO Initialize process of a ESP32 slave device. + * SDIO Initialize process of an ESSL SDIO slave device. * * @param arg Context of the ``essl`` component. Send to other functions later. * @param wait_ms Time to wait before operation is done, in ms. @@ -64,7 +64,7 @@ esp_err_t essl_sdio_deinit_dev(essl_handle_t handle); esp_err_t essl_sdio_init(void *arg, uint32_t wait_ms); /** - * Wait for interrupt of a ESP32 slave device. + * Wait for interrupt of an ESSL SDIO slave device. * * @param arg Context of the ``essl`` component. * @param wait_ms Time to wait before operation is done, in ms. @@ -86,7 +86,7 @@ esp_err_t essl_sdio_wait_for_ready(void *arg, uint32_t wait_ms); */ uint32_t essl_sdio_get_tx_buffer_num(void *arg); -/** Get amount of data the ESP32 slave preparing to send to host. +/** Get amount of data the ESSL SDIO slave preparing to send to host. * * @param arg Context of the component. * @@ -97,7 +97,7 @@ uint32_t essl_sdio_get_tx_buffer_num(void *arg); uint32_t essl_sdio_get_rx_data_size(void *arg); /** - * Send a packet to the ESP32 slave. The slave receive the packet into buffers whose size is ``buffer_size`` in the arg. + * Send a packet to the ESSL SDIO slave. The slave receive the packet into buffers whose size is ``buffer_size`` in the arg. * * @param arg Context of the component. * @param start Start address of the packet to send @@ -112,7 +112,7 @@ uint32_t essl_sdio_get_rx_data_size(void *arg); esp_err_t essl_sdio_send_packet(void *arg, const void *start, size_t length, uint32_t wait_ms); /** - * Get a packet from ESP32 slave. + * Get a packet from an ESSL SDIO slave. * * @param arg Context of the component. * @param[out] out_data Data output address @@ -140,7 +140,7 @@ esp_err_t essl_sdio_get_packet(void *arg, void *out_data, size_t size, uint32_t esp_err_t essl_sdio_wait_int(void *arg, uint32_t wait_ms); /** - * Clear interrupt bits of ESP32 slave. All the bits set in the mask will be cleared, while other bits will stay the same. + * Clear interrupt bits of an ESSL SDIO slave. All the bits set in the mask will be cleared, while other bits will stay the same. * * @param arg Context of the component. * @param intr_mask Mask of interrupt bits to clear. @@ -153,7 +153,7 @@ esp_err_t essl_sdio_wait_int(void *arg, uint32_t wait_ms); esp_err_t essl_sdio_clear_intr(void *arg, uint32_t intr_mask, uint32_t wait_ms); /** - * Get interrupt bits of ESP32 slave. + * Get interrupt bits of an ESSL SDIO slave. * * @param arg Context of the component. * @param intr_raw Output of the raw interrupt bits. Set to NULL if only masked bits are read. @@ -168,7 +168,7 @@ esp_err_t essl_sdio_clear_intr(void *arg, uint32_t intr_mask, uint32_t wait_ms); esp_err_t essl_sdio_get_intr(void *arg, uint32_t *intr_raw, uint32_t *intr_st, uint32_t wait_ms); /** - * Set interrupt enable bits of ESP32 slave. The slave only sends interrupt on the line when there is a bit both the raw status and the enable are set. + * Set interrupt enable bits of an ESSL SDIO slave. The slave only sends interrupt on the line when there is a bit both the raw status and the enable are set. * * @param arg Context of the component. * @param ena_mask Mask of the interrupt bits to enable. @@ -181,7 +181,7 @@ esp_err_t essl_sdio_get_intr(void *arg, uint32_t *intr_raw, uint32_t *intr_st, u esp_err_t essl_sdio_set_intr_ena(void *arg, uint32_t ena_mask, uint32_t wait_ms); /** - * Get interrupt enable bits of ESP32 slave. + * Get interrupt enable bits of an ESSL SDIO slave. * * @param arg Context of the component. * @param ena_mask_o Output of interrupt bit enable mask. @@ -194,7 +194,7 @@ esp_err_t essl_sdio_set_intr_ena(void *arg, uint32_t ena_mask, uint32_t wait_ms) esp_err_t essl_sdio_get_intr_ena(void *arg, uint32_t *ena_mask_o, uint32_t wait_ms); /** - * Write general purpose R/W registers (8-bit) of ESP32 slave. + * Write general purpose R/W registers (8-bit) of an ESSL SDIO slave. * * @param arg Context of the component. * @param addr Address of register to write. Valid address: 0-27, 32-63 (28-31 reserved). @@ -209,7 +209,7 @@ esp_err_t essl_sdio_get_intr_ena(void *arg, uint32_t *ena_mask_o, uint32_t wait_ esp_err_t essl_sdio_write_reg(void *arg, uint8_t addr, uint8_t value, uint8_t *value_o, uint32_t wait_ms); /** - * Read general purpose R/W registers (8-bit) of ESP32 slave. + * Read general purpose R/W registers (8-bit) of an ESSL SDIO slave. * * @param arg Context of the component. * @param add Address of register to read. Valid address: 0-27, 32-63 (28-31 reserved, return interrupt bits on read).