Merge branch 'feature/apm_support_esp32h2' into 'master'

apm: added support for APM on esp32h2

Closes IDF-6277, IDF-6278, and IDF-5909

See merge request espressif/esp-idf!22345
pull/10747/head
Mahavir Jain 2023-02-15 03:48:28 +08:00
commit 01734d15c8
4 zmienionych plików z 219 dodań i 8 usunięć

Wyświetl plik

@ -20,8 +20,14 @@
void bootloader_init_mem(void)
{
#if CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32H2
// disable apm filter // TODO: IDF-5909
#if SOC_APM_SUPPORTED
/* By default, these access path filters are enable and allow the
* access to masters only if they are in TEE mode. Since all masters
* except HP CPU boots in REE mode, default setting of these filters
* will deny the access to all masters except HP CPU.
* So, at boot disabling these filters. They will enable as per the
* use case by TEE initialization code.
*/
REG_WRITE(LP_APM_FUNC_CTRL_REG, 0);
REG_WRITE(LP_APM0_FUNC_CTRL_REG, 0);
REG_WRITE(HP_APM_FUNC_CTRL_REG, 0);

Wyświetl plik

@ -7,14 +7,30 @@
#include <stdint.h>
#include <stdbool.h>
#include "soc/pcr_reg.h"
#include "soc/tee_reg.h"
#define TEE_LL_MODE_CTRL_REG(master_id) (TEE_M0_MODE_CTRL_REG + 4 * (master_id))
#include "soc/hp_apm_reg.h"
#include "soc/hp_apm_struct.h"
#ifdef __cplusplus
extern "C" {
#endif
#define TEE_LL_MODE_CTRL_REG(master_id) (TEE_M0_MODE_CTRL_REG + 4 * (master_id))
#define APM_LL_REGION_ADDR_START_REG(regn_num) (HP_APM_REGION0_ADDR_START_REG + 0xC * (regn_num))
#define APM_LL_REGION_ADDR_END_REG(regn_num) (HP_APM_REGION0_ADDR_END_REG + 0xC * (regn_num))
#define APM_LL_REGION_ADDR_ATTR_REG(regn_num) (HP_APM_REGION0_PMS_ATTR_REG + 0xC * (regn_num))
#define APM_LL_TEE_EXCP_STATUS_REG(sec_mode) (HP_APM_M0_STATUS_REG + 0x10 * (sec_mode))
#define APM_LL_TEE_EXCP_CLR_REG(sec_mode) (HP_APM_M0_STATUS_CLR_REG + 0x10 * (sec_mode))
#define APM_LL_TEE_EXCP_INFO0_REG(sec_mode) (HP_APM_M0_EXCEPTION_INFO0_REG + 0x10 * (sec_mode))
#define APM_LL_HP_SEC_MODE_REGION_ATTR(sec_mode, regn_pms) ((regn_pms) << (4 * (sec_mode - 1)))
#define APM_LL_HP_SEC_MODE_REGION_ATTR_V 0x00000003U
#define APM_LL_HP_SEC_MODE_REGION_ATTR_M(sec_mode) (APM_LL_HP_SEC_MODE_REGION_ATTR_V << (4 * (sec_mode - 1)))
#define APM_LL_HP_MAX_REGION_NUM 15
#define APM_LL_MASTER_MAX 32
/**
* @brief APM Master ID
*/
@ -40,21 +56,206 @@ typedef enum {
* @brief APM Secure Mode
*/
typedef enum {
APM_LL_SECURE_MODE_TEE = 0, /* Trusted execution environment mode */
APM_LL_SECURE_MODE_TEE = 0, /* Trusted execution environment mode */
APM_LL_SECURE_MODE_REE0 = 1, /* Rich execution environment mode0 (need to configure APM strategy for this mode) */
APM_LL_SECURE_MODE_REE1 = 2, /* Rich execution environment mode1 (need to configure APM strategy for this mode) */
APM_LL_SECURE_MODE_REE2 = 3, /* Rich execution environment mode2 (need to configure APM strategy for this mode) */
} apm_ll_secure_mode_t;
/**
* @brief APM HP access path
*/
typedef enum {
APM_LL_HP_ACCESS_PATH_M0 = 0x0,
APM_LL_HP_ACCESS_PATH_M1 = 0x1,
APM_LL_HP_ACCESS_PATH_M2 = 0x2,
APM_LL_HP_ACCESS_PATH_M3 = 0x3,
} apm_ll_hp_access_path_t;
/**
* @brief APM exception information
*/
typedef struct {
uint8_t excp_id;
apm_ll_secure_mode_t sec_mode;
uint8_t excp_regn;
uint8_t excp_mode;
uint32_t excp_addr;
} apm_hp_m_exception_info_t;
/**
* @brief Set secure mode
*
* @param master_id APM master ID
* @param mode Secure mode
*/
static inline void apm_ll_set_master_secure_mode(apm_ll_master_id_t master_id, apm_ll_secure_mode_t mode)
static inline void apm_tee_ll_set_master_secure_mode(apm_ll_master_id_t master_id, apm_ll_secure_mode_t sec_mode)
{
REG_WRITE(TEE_LL_MODE_CTRL_REG(master_id), mode);
REG_WRITE(TEE_LL_MODE_CTRL_REG(master_id), sec_mode);
}
/**
* @brief TEE controller clock auto gating enable
*
* @param enable Flag for HP clock auto gating enable/disable
*/
static inline void apm_tee_ll_clk_gating_enable(bool enable)
{
if (enable) {
REG_SET_BIT(TEE_CLOCK_GATE_REG, TEE_CLK_EN);
} else {
REG_CLR_BIT(TEE_CLOCK_GATE_REG, TEE_CLK_EN);
}
}
/**
* @brief enable/disable HP Region access permission filter
*
* @param regn_num Memory Region number
* @param enable Flag for Region access filter enable/disable
*/
static inline void apm_hp_ll_region_filter_enable(uint32_t regn_num, bool enable)
{
if (enable) {
REG_SET_BIT(HP_APM_REGION_FILTER_EN_REG, BIT(regn_num));
} else {
REG_CLR_BIT(HP_APM_REGION_FILTER_EN_REG, BIT(regn_num));
}
}
/**
* @brief enable/disable HP access path(M[0:3])
*
* @param hp_m_path HP access path
* @param enable Flag for HP M path filter enable/disable
*/
static inline void apm_hp_ll_m_filter_enable(apm_ll_hp_access_path_t hp_m_path, bool enable)
{
if (enable) {
REG_SET_BIT(HP_APM_FUNC_CTRL_REG, BIT(hp_m_path));
} else {
REG_CLR_BIT(HP_APM_FUNC_CTRL_REG, BIT(hp_m_path));
}
}
/**
* @brief HP Region start address configuration
*
* @param regn_num HP Region number to be configured
* @param addr Region start address
*/
static inline void apm_hp_ll_set_region_start_address(uint32_t regn_num, uint32_t addr)
{
REG_WRITE(APM_LL_REGION_ADDR_START_REG(regn_num), addr);
}
/**
* @brief HP Region end address configuration
*
* @param regn_num HP Region number to be configured
* @param addr Region end address
*/
static inline void apm_hp_ll_set_region_end_address(uint32_t regn_num, uint32_t addr)
{
REG_WRITE(APM_LL_REGION_ADDR_END_REG(regn_num), addr);
}
/**
* @brief HP Region pms attributes configuration
*
* @param regn_num Region number to be configured
* @param sec_mode Secure mode of the Master
* @param regn_pms XWR permissions for the given secure mode and Region number
*/
static inline void apm_hp_ll_sec_mode_region_attr_config(uint32_t regn_num, apm_ll_secure_mode_t sec_mode, uint32_t regn_pms)
{
uint32_t val = 0;
val = REG_READ(APM_LL_REGION_ADDR_ATTR_REG(regn_num));
val &= ~APM_LL_HP_SEC_MODE_REGION_ATTR_M(sec_mode);
val |= APM_LL_HP_SEC_MODE_REGION_ATTR(sec_mode, regn_pms);
REG_WRITE(APM_LL_REGION_ADDR_ATTR_REG(regn_num), val);
}
/**
* @brief Get HP access path(M[0:3]) exception status
*
* @param hp_m_path HP access path
*/
static inline uint8_t apm_hp_ll_m_exception_status(apm_ll_hp_access_path_t hp_m_path)
{
return REG_READ(APM_LL_TEE_EXCP_STATUS_REG(hp_m_path));
}
/**
* @brief Clear HP access path(M[0:3]) exception
*
* @param hp_m_path HP access path
*/
static inline void apm_hp_ll_m_exception_clear(apm_ll_hp_access_path_t hp_m_path)
{
REG_SET_BIT(APM_LL_TEE_EXCP_CLR_REG(hp_m_path), HP_APM_M0_REGION_STATUS_CLR);
}
/**
* @brief Get HP access path(M[0:3]) exception information
*
* @param excp_info Exception related information like addr,
* region, sec_mode and master id
*/
static inline void apm_hp_ll_get_m_exception_info(apm_hp_m_exception_info_t *excp_info)
{
excp_info->excp_id = REG_GET_FIELD(APM_LL_TEE_EXCP_INFO0_REG(excp_info->sec_mode), HP_APM_M0_EXCEPTION_ID);
excp_info->excp_mode = REG_GET_FIELD(APM_LL_TEE_EXCP_INFO0_REG(excp_info->sec_mode), HP_APM_M0_EXCEPTION_MODE);
excp_info->excp_regn = REG_GET_FIELD(APM_LL_TEE_EXCP_INFO0_REG(excp_info->sec_mode), HP_APM_M0_EXCEPTION_REGION);
excp_info->excp_addr = REG_READ(HP_APM_M0_EXCEPTION_INFO1_REG);
}
/**
* @brief Interrupt enable for access path(M[0:3])
*
* @param hp_m_path HP access path
* @param enable Flag for access path interrupt enable/disable
*/
static inline void apm_hp_ll_m_interrupt_enable(apm_ll_hp_access_path_t hp_m_path, bool enable)
{
if (enable) {
REG_SET_BIT(HP_APM_INT_EN_REG, BIT(hp_m_path));
} else {
REG_CLR_BIT(HP_APM_INT_EN_REG, BIT(hp_m_path));
}
}
/**
* @brief HP clock auto gating enable
*
* @param enable Flag for HP clock auto gating enable/disable
*/
static inline void apm_hp_ll_clk_gating_enable(bool enable)
{
if (enable) {
REG_SET_BIT(HP_APM_CLOCK_GATE_REG, HP_APM_CLK_EN);
} else {
REG_CLR_BIT(HP_APM_CLOCK_GATE_REG, HP_APM_CLK_EN);
}
}
/**
* @brief APM/TEE/HP System Reg reset event bypass enable
*
* Disable: tee_reg/apm_reg/hp_system_reg will not only be reset by power-reset,
* but also some reset events.
* Enable: tee_reg/apm_reg/hp_system_reg will only be reset by power-reset.
* Some reset events will be bypassed.
*
* @param enable Flag for event bypass enable/disable
*/
static inline void apm_hp_ll_reset_event_enable(bool enable)
{
if (enable) {
REG_SET_BIT(PCR_RESET_EVENT_BYPASS_REG, PCR_RESET_EVENT_BYPASS_APM);
} else {
REG_CLR_BIT(PCR_RESET_EVENT_BYPASS_REG, PCR_RESET_EVENT_BYPASS_APM);
}
}
#ifdef __cplusplus

Wyświetl plik

@ -111,6 +111,10 @@ config SOC_BOD_SUPPORTED
bool
default y
config SOC_APM_SUPPORTED
bool
default y
config SOC_XTAL_SUPPORT_32M
bool
default y

Wyświetl plik

@ -62,7 +62,7 @@
// #define SOC_FLASH_ENC_SUPPORTED 1 // TODO: IDF-6282
// #define SOC_SECURE_BOOT_SUPPORTED 1 // TODO: IDF-6281
#define SOC_BOD_SUPPORTED 1
// #define SOC_APM_SUPPORTED 1 // TODO: IDF-6277
#define SOC_APM_SUPPORTED 1
/*-------------------------- XTAL CAPS ---------------------------------------*/
#define SOC_XTAL_SUPPORT_32M 1