kopia lustrzana https://github.com/espressif/esp-idf
30 wiersze
1.2 KiB
Markdown
30 wiersze
1.2 KiB
Markdown
|
# CAN Alert and Recovery Example
|
||
|
|
|
||
|
|
## Overview
|
||
|
|
The CAN Alert and Recovery Example demonstrates the usage of alerts and bus
|
||
|
|
recovery in the CAN driver. This example **requires only a single ESP32 module
|
||
|
|
to run**.
|
||
|
|
|
||
|
|
The CAN Alert and Recovery Example will do the following...
|
||
|
|
|
||
|
|
1. Initialize and start the CAN driver on the ESP32 module
|
||
|
|
2. Repeatedly transmit messages (no acknowledgement required)
|
||
|
|
3. Reconfigure alerts to detect bus-off state
|
||
|
|
4. Purposely trigger errors on transmissions
|
||
|
|
5. Detect Bus Off condition
|
||
|
|
6. Initiate bus recovery
|
||
|
|
7. Deinitialize CAN driver on ESP32 module
|
||
|
|
|
||
|
|
## External Transceiver and Pin Assignment
|
||
|
|
The CAN controller in the ESP32 **does not contain an internal transceiver**.
|
||
|
|
Therefore users are responsible for providing an external transceiver compatible
|
||
|
|
with the physical layer specifications of their target ISO standard (such as
|
||
|
|
SN65HVD23X transceivers for ISO 11898-2 compatibility)
|
||
|
|
|
||
|
|
The CAN controller in the ESP32 represents dominant bits to the transceiver as
|
||
|
|
logic low, and recessive bits as logic high. The Alert and Recovery Example
|
||
|
|
utilizes the following default pin assignments
|
||
|
|
|
||
|
|
* TX Pin is routed to GPIO21
|
||
|
|
* RX Pin is routed to GPIO22
|