esp-idf/README.md

# Using Espressif IoT Development Framework with the ESP32

# Prerequisites

# Configuring your project

`make menuconfig`

# Compiling your project

`make all`

... will compile app, bootloader and generate a partition table based on the config.

# Flashing your project

When `make all` finishes, it will print a command line to use esptool.py to flash the chip. However you can also do this from make by running:

`make flash`

This will flash the entire project (app, bootloader and partition table) to a new chip. The settings for serial port flashing can be configured with `make menuconfig`.

You don't need to run `make all` before running `make flash`, `make flash` will automatically rebuild anything which needs it.

# Compiling & Flashing Just the App

After the initial flash, you may just want to build and flash just your app, not the bootloader and partition table:

* `make app` - build just the app.
* `make app-flash` - flash just the app.

`make app-flash` will automatically rebuild the app if it needs it.

(There's no downside to reflashing the bootloader and partition table each time, if they haven't changed.)

# The Partition Table

Once you've compiled your project, the "build" directory will contain a binary file with a name like "my_app.bin". This is an ESP32 image binary that can be loaded by the bootloader.

A single ESP32's flash can contain multiple apps, as well as many different kinds of data (calibration data, filesystems, parameter storage, etc). For this reason a partition table is flashed to offset 0x4000 in the flash.

Each entry in the partition table has a name (label), type (app, data, or something else), subtype and the offset in flash where the partition is loaded.

The simplest way to use the partition table is to `make menuconfig` and choose one of the simple predefined partition tables:

* "Single factory app, no OTA"
* "Factory app, two OTA definitions"

In both cases the factory app is flashed at offset 0x10000. If you `make partition_table` then it will print a summary of the partition table.

For more details about partition tables and how to create custom variations, view the `docs/partition_tables.rst` file.

# Resources

* The [docs directory of the esp-idf repository](https://github.com/espressif/esp-idf/tree/master/docs) contains esp-idf documentation.

* The [esp32.com forum](http://esp32.com/) is a place to ask questions and find community resources.

* [Check the Issues section on github](https://github.com/espressif/esp-idf/issues) if you find a bug or have a feature request. Please check existing Issues before opening a new one.