esp-idf/docs/en/api-guides/hlinterrupts.rst

70 wiersze
3.2 KiB
ReStructuredText
Czysty Zwykły widok Historia

High-Level Interrupts
=====================
.. toctree::
:maxdepth: 1
The Xtensa architecture has support for 32 interrupts, divided over 8 levels, plus an assortment of exceptions. On the {IDF_TARGET_NAME}, the interrupt mux allows most interrupt sources to be routed to these interrupts using the :doc:`interrupt allocator <../api-reference/system/intr_alloc>`. Normally, interrupts will be written in C, but ESP-IDF allows high-level interrupts to be written in assembly as well, allowing for very low interrupt latencies.
Interrupt Levels
----------------
===== ================= ====================================================
Level Symbol Remark
===== ================= ====================================================
1 N/A Exception and level 0 interrupts. Handled by ESP-IDF
2-3 N/A Medium level interrupts. Handled by ESP-IDF
4 xt_highint4 Normally used by ESP-IDF debug logic
5 xt_highint5 Free to use
NMI xt_nmi Free to use
dbg xt_debugexception Debug exception. Called on e.g. a BREAK instruction.
===== ================= ====================================================
Using these symbols is done by creating an assembly file (suffix .S) and defining the named symbols, like this::
.section .iram1,"ax"
.global xt_highint5
.type xt_highint5,@function
.align 4
xt_highint5:
... your code here
rsr a0, EXCSAVE_5
rfi 5
2020-10-08 05:18:16 +00:00
For a real-life example, see the :component_file:`esp_system/port/soc/{IDF_TARGET_PATH_NAME}/dport_panic_highint_hdl.S` file; the panic handler interrupt is implemented there.
Notes
-----
- Do not call C code from a high-level interrupt; because these interrupts still run in critical sections, this can cause crashes.
(The panic handler interrupt does call normal C code, but this is OK because there is no intention of returning to the normal code
flow afterwards.)
- Make sure your assembly code gets linked in. If the interrupt handler symbol is the only symbol the rest of the code uses from this
file, the linker will take the default ISR instead and not link the assembly file into the final project. To get around this, in the
assembly file, define a symbol, like this::
.global ld_include_my_isr_file
ld_include_my_isr_file:
The symbol is called ``ld_include_my_isr_file`` here but can have any arbitrary name not defined anywhere else.
Then, in the component CMakeLists.txt, add this file as an unresolved symbol to the ld command line arguments::
target_link_libraries(${COMPONENT_TARGET} "-u ld_include_my_isr_file")
If using the legacy Make build system, add the following to component.mk, instead::
COMPONENT_ADD_LDFLAGS := -u ld_include_my_isr_file
This should cause the linker to always include a file defining ``ld_include_my_isr_file``, causing the ISR to always be linked in.
- High-level interrupts can be routed and handled using esp_intr_alloc and associated functions. The handler and handler arguments
to esp_intr_alloc must be NULL, however.
- In theory, medium priority interrupts could also be handled in this way. For now, ESP-IDF does not support this.