esp-idf/examples/system/eventfd/README.md

75 wiersze
2.7 KiB
Markdown
Czysty Zwykły widok Historia

2021-03-08 07:48:30 +00:00
# eventfd example
The example demonstrates the use of `eventfd()` to collect events from other tasks and ISRs in a
`select()` based main loop. The example starts two tasks and installs a timer interrupt handler:
1. The first task writes to the first `eventfd` periodically.
2. The timer interrupt handler writes to the second `eventfd`.
3. The second task collects the event from two fds with a `select()` loop.
2021-03-08 11:52:05 +00:00
## How to use example
### Hardware Required
This example should be able to run on any commonly available ESP32, ESP32S2, ESP32S3 or ESP32C3 development board.
### Configure the project
```
idf.py menuconfig
```
The default config will work.
### Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
```
idf.py -p PORT flash monitor
```
(Replace PORT with the name of the serial port to use.)
(To exit the serial monitor, type ``Ctrl-]``.)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
## Example Output
The following log output should appear when the example runs (note that the bootloader log has been omitted).
```
I (4340) eventfd_example: Elapsed since test start: 2003 ms
I (4340) eventfd_example: Select timeout
I (4830) eventfd_example: Elapsed since test start: 2499 ms
I (4830) eventfd_example: TimerEvent fd event triggered
I (5830) eventfd_example: Elapsed since test start: 3493 ms
I (5830) eventfd_example: Progress fd event triggered
I (7330) eventfd_example: Elapsed since test start: 4999 ms
I (7330) eventfd_example: TimerEvent fd event triggered
I (7330) eventfd_example: =================================
I (7340) eventfd_example: Select timeouted for 1 times
I (7340) eventfd_example: Timer triggerred for 2 times
I (7350) eventfd_example: Progress triggerred for 1 times
I (7360) eventfd_example: =================================
I (9330) eventfd_example: Elapsed since test start: 6993 ms
I (9330) eventfd_example: Progress fd event triggered
I (9830) eventfd_example: Elapsed since test start: 7499 ms
I (9830) eventfd_example: TimerEvent fd event triggered
I (11840) eventfd_example: Elapsed since test start: 9503 ms
I (11840) eventfd_example: Select timeout
I (12330) eventfd_example: Elapsed since test start: 9999 ms
I (12330) eventfd_example: TimerEvent fd event triggered
I (12330) eventfd_example: =================================
I (12340) eventfd_example: Select timeouted for 2 times
I (12340) eventfd_example: Timer triggerred for 4 times
I (12350) eventfd_example: Progress triggerred for 2 times
I (12360) eventfd_example: =================================
2021-03-08 11:52:05 +00:00
```
## Diagram
The following diagram shows, with a timeline, the order of the events:
![Timeline](timeline.svg)