kopia lustrzana https://github.com/espressif/esp-idf
206 wiersze
7.8 KiB
C
206 wiersze
7.8 KiB
C
![]() |
/* Timer group-hardware timer example
|
||
|
|
||
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
||
|
|
||
|
Unless required by applicable law or agreed to in writing, this
|
||
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
||
|
CONDITIONS OF ANY KIND, either express or implied.
|
||
|
*/
|
||
|
|
||
|
#include <stdio.h>
|
||
|
#include "esp_types.h"
|
||
|
#include "freertos/FreeRTOS.h"
|
||
|
#include "freertos/task.h"
|
||
|
#include "freertos/queue.h"
|
||
|
#include "soc/timer_group_struct.h"
|
||
|
#include "driver/periph_ctrl.h"
|
||
|
#include "driver/timer.h"
|
||
|
|
||
|
#define TIMER_INTR_SEL TIMER_INTR_LEVEL /*!< Timer level interrupt */
|
||
|
#define TIMER_GROUP TIMER_GROUP_0 /*!< Test on timer group 0 */
|
||
|
#define TIMER_DIVIDER 16 /*!< Hardware timer clock divider */
|
||
|
#define TIMER_SCALE (TIMER_BASE_CLK / TIMER_DIVIDER) /*!< used to calculate counter value */
|
||
|
#define TIMER_FINE_ADJ (1.4*(TIMER_BASE_CLK / TIMER_DIVIDER)/1000000) /*!< used to compensate alarm value */
|
||
|
#define TIMER_INTERVAL0_SEC (3.4179) /*!< test interval for timer 0 */
|
||
|
#define TIMER_INTERVAL1_SEC (5.78) /*!< test interval for timer 1 */
|
||
|
#define TEST_WITHOUT_RELOAD 0 /*!< example of auto-reload mode */
|
||
|
#define TEST_WITH_RELOAD 1 /*!< example without auto-reload mode */
|
||
|
|
||
|
typedef struct {
|
||
|
int type; /*!< event type */
|
||
|
int group; /*!< timer group */
|
||
|
int idx; /*!< timer number */
|
||
|
uint64_t counter_val; /*!< timer counter value */
|
||
|
double time_sec; /*!< calculated time from counter value */
|
||
|
} timer_event_t;
|
||
|
|
||
|
xQueueHandle timer_queue;
|
||
|
|
||
|
/*
|
||
|
* @brief Print a uint64_t value
|
||
|
*/
|
||
|
static void inline print_u64(uint64_t val)
|
||
|
{
|
||
|
printf("0x%08x%08x\n", (uint32_t) (val >> 32), (uint32_t) (val));
|
||
|
}
|
||
|
|
||
![]() |
static void timer_example_evt_task(void *arg)
|
||
![]() |
{
|
||
|
while(1) {
|
||
|
timer_event_t evt;
|
||
|
xQueueReceive(timer_queue, &evt, portMAX_DELAY);
|
||
|
if(evt.type == TEST_WITHOUT_RELOAD) {
|
||
|
printf("\n\n example of count-up-timer \n");
|
||
|
} else if(evt.type == TEST_WITH_RELOAD) {
|
||
|
printf("\n\n example of reload-timer \n");
|
||
|
|
||
|
}
|
||
|
/*Show timer event from interrupt*/
|
||
|
printf("-------INTR TIME EVT--------\n");
|
||
|
printf("TG[%d] timer[%d] alarm evt\n", evt.group, evt.idx);
|
||
|
printf("reg: ");
|
||
|
print_u64(evt.counter_val);
|
||
|
printf("time: %.8f S\n", evt.time_sec);
|
||
|
/*Read timer value from task*/
|
||
|
printf("======TASK TIME======\n");
|
||
|
uint64_t timer_val;
|
||
|
timer_get_counter_value(evt.group, evt.idx, &timer_val);
|
||
|
double time;
|
||
|
timer_get_counter_time_sec(evt.group, evt.idx, &time);
|
||
|
printf("TG[%d] timer[%d] alarm evt\n", evt.group, evt.idx);
|
||
|
printf("reg: ");
|
||
|
print_u64(timer_val);
|
||
|
printf("time: %.8f S\n", time);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* @brief timer group0 ISR handler
|
||
|
*/
|
||
|
void IRAM_ATTR timer_group0_isr(void *para)
|
||
|
{
|
||
|
int timer_idx = (int) para;
|
||
|
uint32_t intr_status = TIMERG0.int_st_timers.val;
|
||
|
timer_event_t evt;
|
||
|
if((intr_status & BIT(timer_idx)) && timer_idx == TIMER_0) {
|
||
![]() |
/*Timer0 is an example that doesn't reload counter value*/
|
||
![]() |
TIMERG0.hw_timer[timer_idx].update = 1;
|
||
|
|
||
![]() |
/* We don't call a API here because they are not declared with IRAM_ATTR.
|
||
|
If we're okay with the timer irq not being serviced while SPI flash cache is disabled,
|
||
|
we can alloc this interrupt without the ESP_INTR_FLAG_IRAM flag and use the normal API. */
|
||
![]() |
TIMERG0.int_clr_timers.t0 = 1;
|
||
|
uint64_t timer_val = ((uint64_t) TIMERG0.hw_timer[timer_idx].cnt_high) << 32
|
||
|
| TIMERG0.hw_timer[timer_idx].cnt_low;
|
||
|
double time = (double) timer_val / (TIMER_BASE_CLK / TIMERG0.hw_timer[timer_idx].config.divider);
|
||
|
|
||
|
/*Post an event to out example task*/
|
||
|
evt.type = TEST_WITHOUT_RELOAD;
|
||
|
evt.group = 0;
|
||
|
evt.idx = timer_idx;
|
||
|
evt.counter_val = timer_val;
|
||
|
evt.time_sec = time;
|
||
|
xQueueSendFromISR(timer_queue, &evt, NULL);
|
||
|
|
||
|
/*For a timer that will not reload, we need to set the next alarm value each time. */
|
||
|
timer_val +=
|
||
|
(uint64_t) (TIMER_INTERVAL0_SEC * (TIMER_BASE_CLK / TIMERG0.hw_timer[timer_idx].config.divider));
|
||
|
/*Fine adjust*/
|
||
|
timer_val -= TIMER_FINE_ADJ;
|
||
|
TIMERG0.hw_timer[timer_idx].alarm_high = (uint32_t) (timer_val >> 32);
|
||
|
TIMERG0.hw_timer[timer_idx].alarm_low = (uint32_t) timer_val;
|
||
|
/*After set alarm, we set alarm_en bit if we want to enable alarm again.*/
|
||
|
TIMERG0.hw_timer[timer_idx].config.alarm_en = 1;
|
||
|
|
||
|
} else if((intr_status & BIT(timer_idx)) && timer_idx == TIMER_1) {
|
||
|
/*Timer1 is an example that will reload counter value*/
|
||
|
TIMERG0.hw_timer[timer_idx].update = 1;
|
||
|
/*We don't call a API here because they are not declared with IRAM_ATTR*/
|
||
|
TIMERG0.int_clr_timers.t1 = 1;
|
||
|
uint64_t timer_val = ((uint64_t) TIMERG0.hw_timer[timer_idx].cnt_high) << 32
|
||
|
| TIMERG0.hw_timer[timer_idx].cnt_low;
|
||
|
double time = (double) timer_val / (TIMER_BASE_CLK / TIMERG0.hw_timer[timer_idx].config.divider);
|
||
|
/*Post an event to out example task*/
|
||
|
evt.type = TEST_WITH_RELOAD;
|
||
|
evt.group = 0;
|
||
|
evt.idx = timer_idx;
|
||
|
evt.counter_val = timer_val;
|
||
|
evt.time_sec = time;
|
||
|
xQueueSendFromISR(timer_queue, &evt, NULL);
|
||
|
/*For a auto-reload timer, we still need to set alarm_en bit if we want to enable alarm again.*/
|
||
|
TIMERG0.hw_timer[timer_idx].config.alarm_en = 1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* @brief timer group0 hardware timer0 init
|
||
|
*/
|
||
![]() |
static void example_tg0_timer0_init()
|
||
![]() |
{
|
||
|
int timer_group = TIMER_GROUP_0;
|
||
|
int timer_idx = TIMER_0;
|
||
|
timer_config_t config;
|
||
|
config.alarm_en = 1;
|
||
|
config.auto_reload = 0;
|
||
|
config.counter_dir = TIMER_COUNT_UP;
|
||
|
config.divider = TIMER_DIVIDER;
|
||
|
config.intr_type = TIMER_INTR_SEL;
|
||
|
config.counter_en = TIMER_PAUSE;
|
||
|
/*Configure timer*/
|
||
|
timer_init(timer_group, timer_idx, &config);
|
||
|
/*Stop timer counter*/
|
||
|
timer_pause(timer_group, timer_idx);
|
||
|
/*Load counter value */
|
||
|
timer_set_counter_value(timer_group, timer_idx, 0x00000000ULL);
|
||
|
/*Set alarm value*/
|
||
|
timer_set_alarm_value(timer_group, timer_idx, TIMER_INTERVAL0_SEC * TIMER_SCALE - TIMER_FINE_ADJ);
|
||
|
/*Enable timer interrupt*/
|
||
|
timer_enable_intr(timer_group, timer_idx);
|
||
|
/*Set ISR handler*/
|
||
![]() |
timer_isr_register(timer_group, timer_idx, timer_group0_isr, (void*) timer_idx, ESP_INTR_FLAG_IRAM, NULL);
|
||
![]() |
/*Start timer counter*/
|
||
|
timer_start(timer_group, timer_idx);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* @brief timer group0 hardware timer1 init
|
||
|
*/
|
||
![]() |
static void example_tg0_timer1_init()
|
||
![]() |
{
|
||
|
int timer_group = TIMER_GROUP_0;
|
||
|
int timer_idx = TIMER_1;
|
||
|
timer_config_t config;
|
||
|
config.alarm_en = 1;
|
||
|
config.auto_reload = 1;
|
||
|
config.counter_dir = TIMER_COUNT_UP;
|
||
|
config.divider = TIMER_DIVIDER;
|
||
|
config.intr_type = TIMER_INTR_SEL;
|
||
|
config.counter_en = TIMER_PAUSE;
|
||
|
/*Configure timer*/
|
||
|
timer_init(timer_group, timer_idx, &config);
|
||
|
/*Stop timer counter*/
|
||
|
timer_pause(timer_group, timer_idx);
|
||
|
/*Load counter value */
|
||
|
timer_set_counter_value(timer_group, timer_idx, 0x00000000ULL);
|
||
|
/*Set alarm value*/
|
||
|
timer_set_alarm_value(timer_group, timer_idx, TIMER_INTERVAL1_SEC * TIMER_SCALE);
|
||
|
/*Enable timer interrupt*/
|
||
|
timer_enable_intr(timer_group, timer_idx);
|
||
|
/*Set ISR handler*/
|
||
![]() |
timer_isr_register(timer_group, timer_idx, timer_group0_isr, (void*) timer_idx, ESP_INTR_FLAG_IRAM, NULL);
|
||
![]() |
/*Start timer counter*/
|
||
|
timer_start(timer_group, timer_idx);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* @brief In this test, we will test hardware timer0 and timer1 of timer group0.
|
||
|
*/
|
||
|
void app_main()
|
||
|
{
|
||
![]() |
timer_queue = xQueueCreate(10, sizeof(timer_event_t));
|
||
![]() |
example_tg0_timer0_init();
|
||
|
example_tg0_timer1_init();
|
||
|
xTaskCreate(timer_example_evt_task, "timer_evt_task", 2048, NULL, 5, NULL);
|
||
![]() |
}
|
||
|
|