esp-idf/components/hal/spi_flash_hal.c

160 wiersze
5.7 KiB
C
Czysty Zwykły widok Historia

// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// HAL for SPI Flash (non-IRAM part)
// The IRAM part is in spi_flash_hal_iram.c, spi_flash_hal_gpspi.c, spi_flash_hal_common.inc.
#include <stdlib.h>
2021-05-19 02:53:21 +00:00
#include <string.h>
#include "soc/soc_caps.h"
2021-05-19 02:53:21 +00:00
#include "hal/spi_flash_hal.h"
#include "hal/log.h"
#define APB_CYCLE_NS (1000*1000*1000LL/APB_CLK_FREQ)
static const char TAG[] = "FLASH_HAL";
typedef struct {
int div;
spi_flash_ll_clock_reg_t clock_reg_val;
} spi_flash_hal_clock_config_t;
static const spi_flash_hal_clock_config_t spi_flash_clk_cfg_reg[ESP_FLASH_SPEED_MAX] = {
{16, SPI_FLASH_LL_CLKREG_VAL_5MHZ},
{8, SPI_FLASH_LL_CLKREG_VAL_10MHZ},
{4, SPI_FLASH_LL_CLKREG_VAL_20MHZ},
{3, SPI_FLASH_LL_CLKREG_VAL_26MHZ},
{2, SPI_FLASH_LL_CLKREG_VAL_40MHZ},
{1, SPI_FLASH_LL_CLKREG_VAL_80MHZ},
};
#if !CONFIG_IDF_TARGET_ESP32
static const spi_flash_hal_clock_config_t spi_flash_gpspi_clk_cfg_reg[ESP_FLASH_SPEED_MAX] = {
{16, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_5MHZ}},
{8, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_10MHZ}},
{4, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_20MHZ}},
{3, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_26MHZ}},
{2, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_40MHZ}},
{1, {.gpspi=GPSPI_FLASH_LL_CLKREG_VAL_80MHZ}},
};
#else
#define spi_flash_gpspi_clk_cfg_reg spi_flash_clk_cfg_reg
#endif
static inline int get_dummy_n(bool gpio_is_used, int input_delay_ns, int eff_clk)
{
const int apbclk_kHz = APB_CLK_FREQ / 1000;
//calculate how many apb clocks a period has
const int apbclk_n = APB_CLK_FREQ / eff_clk;
const int gpio_delay_ns = gpio_is_used ? GPIO_MATRIX_DELAY_NS : 0;
//calculate how many apb clocks the delay is, the 1 is to compensate in case ``input_delay_ns`` is rounded off.
int apb_period_n = (1 + input_delay_ns + gpio_delay_ns) * apbclk_kHz / 1000 / 1000;
if (apb_period_n < 0) {
apb_period_n = 0;
}
return apb_period_n / apbclk_n;
}
#if SOC_SPI_MEM_SUPPORT_TIME_TUNING
static inline int extra_dummy_under_timing_tuning(const spi_flash_hal_config_t *cfg)
{
bool main_flash = (cfg->host_id == SPI1_HOST && cfg->cs_num == 0);
int extra_dummy = 0;
if (main_flash) {
/**
* For Octal Flash, the dummy is `usr_dummy` + `extra_dummy`, they are in two different regs, we don't touch `extra_dummy` here, so set extra_dummy 0.
* Instead, for both Quad and Octal Flash, we use `usr_dummy` and set the whole dummy length (usr_dummy + extra_dummy) to this register.
*/
extra_dummy = cfg->extra_dummy;
} else {
// TODO: for other flash chips, dummy get logic implement here. Currently, still calculate extra dummy by itself.
abort();
}
return extra_dummy;
}
#endif //SOC_SPI_MEM_SUPPORT_TIME_TUNING
esp_err_t spi_flash_hal_init(spi_flash_hal_context_t *data_out, const spi_flash_hal_config_t *cfg)
{
if (!esp_ptr_internal(data_out) && cfg->host_id == SPI1_HOST) {
return ESP_ERR_INVALID_ARG;
}
if (cfg->cs_num >= SOC_SPI_PERIPH_CS_NUM(cfg->host_id)) {
return ESP_ERR_INVALID_ARG;
}
bool gpspi = (cfg->host_id > SPI1_HOST);
const spi_flash_hal_clock_config_t *clock_cfg = gpspi? &spi_flash_gpspi_clk_cfg_reg[cfg->speed]: &spi_flash_clk_cfg_reg[cfg->speed];
*data_out = (spi_flash_hal_context_t) {
.inst = data_out->inst, // Keeps the function pointer table
.spi = spi_flash_ll_get_hw(cfg->host_id),
.cs_num = cfg->cs_num,
.cs_hold = cfg->cs_hold,
.cs_setup = cfg->cs_setup,
.base_io_mode = cfg->default_io_mode,
};
#if SOC_SPI_MEM_SUPPORT_TIME_TUNING
if (cfg->using_timing_tuning) {
data_out->extra_dummy = extra_dummy_under_timing_tuning(cfg);
data_out->clock_conf = cfg->clock_config;
} else
#endif // SOC_SPI_MEM_SUPPORT_TIME_TUNING
{
data_out->extra_dummy = get_dummy_n(!cfg->iomux, cfg->input_delay_ns, APB_CLK_FREQ/clock_cfg->div);
data_out->clock_conf = clock_cfg->clock_reg_val;
}
if (cfg->auto_sus_en) {
data_out->flags |= SPI_FLASH_HOST_CONTEXT_FLAG_AUTO_SUSPEND;
data_out->flags |= SPI_FLASH_HOST_CONTEXT_FLAG_AUTO_RESUME;
}
#if SOC_SPI_MEM_SUPPORT_OPI_MODE
if (cfg->octal_mode_en) {
data_out->flags |= SPI_FLASH_HOST_CONTEXT_FLAG_OCTAL_MODE;
}
if (cfg->default_io_mode == SPI_FLASH_OPI_DTR) {
data_out->slicer_flags |= SPI_FLASH_HOST_CONTEXT_SLICER_FLAG_DTR;
}
#endif
2021-05-19 02:53:21 +00:00
HAL_LOGD(TAG, "extra_dummy: %d", data_out->extra_dummy);
return ESP_OK;
}
bool spi_flash_hal_supports_direct_write(spi_flash_host_inst_t *host, const void *p)
{
bool direct_write = ( ((spi_flash_hal_context_t *)host)->spi != spi_flash_ll_get_hw(SPI1_HOST)
|| esp_ptr_in_dram(p) );
return direct_write;
}
bool spi_flash_hal_supports_direct_read(spi_flash_host_inst_t *host, const void *p)
{
//currently the host doesn't support to read through dma, no word-aligned requirements
bool direct_read = ( ((spi_flash_hal_context_t *)host)->spi != spi_flash_ll_get_hw(SPI1_HOST)
|| esp_ptr_in_dram(p) );
return direct_read;
}