kopia lustrzana https://github.com/espressif/esp-idf
239 wiersze
12 KiB
C
239 wiersze
12 KiB
C
![]() |
// Copyright 2019 Espressif Systems (Shanghai) PTE LTD
|
||
|
//
|
||
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
||
|
// you may not use this file except in compliance with the License.
|
||
|
// You may obtain a copy of the License at
|
||
|
//
|
||
|
// http://www.apache.org/licenses/LICENSE-2.0
|
||
|
//
|
||
|
// Unless required by applicable law or agreed to in writing, software
|
||
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
||
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
|
// See the License for the specific language governing permissions and
|
||
|
// limitations under the License.
|
||
|
|
||
|
#pragma once
|
||
|
|
||
|
#ifdef __cplusplus
|
||
|
extern "C" {
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* @brief SPI Instruction Set
|
||
|
*
|
||
|
*/
|
||
|
#define ENC28J60_SPI_CMD_RCR (0x00) // Read Control Register
|
||
|
#define ENC28J60_SPI_CMD_RBM (0x01) // Read Buffer Memory
|
||
|
#define ENC28J60_SPI_CMD_WCR (0x02) // Write Control Register
|
||
|
#define ENC28J60_SPI_CMD_WBM (0x03) // Write Buffer Memory
|
||
|
#define ENC28J60_SPI_CMD_BFS (0x04) // Bit Field Set
|
||
|
#define ENC28J60_SPI_CMD_BFC (0x05) // Bit Field Clear
|
||
|
#define ENC28J60_SPI_CMD_SRC (0x07) // Soft Reset
|
||
|
|
||
|
/**
|
||
|
* @brief Shared Registers in ENC28J60 (accessible on each bank)
|
||
|
*
|
||
|
*/
|
||
|
#define ENC28J60_EIE (0x1B) // Ethernet Interrupt Enable
|
||
|
#define ENC28J60_EIR (0x1C) // Ethernet Interrupt flags
|
||
|
#define ENC28J60_ESTAT (0x1D) // Ethernet Status
|
||
|
#define ENC28J60_ECON2 (0x1E) // Ethernet Control Register2
|
||
|
#define ENC28J60_ECON1 (0x1F) // Ethernet Control Register1
|
||
|
|
||
|
/**
|
||
|
* @brief Per-bank Registers in ENC28J60
|
||
|
* @note Address[15:12]: Register Type, 0 -> ETH, 1 -> MII/MAC
|
||
|
* Address[11:8] : Bank address
|
||
|
* Address[7:0] : Register Index
|
||
|
*/
|
||
|
// Bank 0 Registers
|
||
|
#define ENC28J60_ERDPTL (0x0000) // Read Pointer Low Byte ERDPT<7:0>)
|
||
|
#define ENC28J60_ERDPTH (0x0001) // Read Pointer High Byte (ERDPT<12:8>)
|
||
|
#define ENC28J60_EWRPTL (0x0002) // Write Pointer Low Byte (EWRPT<7:0>)
|
||
|
#define ENC28J60_EWRPTH (0x0003) // Write Pointer High Byte (EWRPT<12:8>)
|
||
|
#define ENC28J60_ETXSTL (0x0004) // TX Start Low Byte (ETXST<7:0>)
|
||
|
#define ENC28J60_ETXSTH (0x0005) // TX Start High Byte (ETXST<12:8>)
|
||
|
#define ENC28J60_ETXNDL (0x0006) // TX End Low Byte (ETXND<7:0>)
|
||
|
#define ENC28J60_ETXNDH (0x0007) // TX End High Byte (ETXND<12:8>)
|
||
|
#define ENC28J60_ERXSTL (0x0008) // RX Start Low Byte (ERXST<7:0>)
|
||
|
#define ENC28J60_ERXSTH (0x0009) // RX Start High Byte (ERXST<12:8>)
|
||
|
#define ENC28J60_ERXNDL (0x000A) // RX End Low Byte (ERXND<7:0>)
|
||
|
#define ENC28J60_ERXNDH (0x000B) // RX End High Byte (ERXND<12:8>)
|
||
|
#define ENC28J60_ERXRDPTL (0x000C) // RX RD Pointer Low Byte (ERXRDPT<7:0>)
|
||
|
#define ENC28J60_ERXRDPTH (0x000D) // RX RD Pointer High Byte (ERXRDPT<12:8>)
|
||
|
#define ENC28J60_ERXWRPTL (0x000E) // RX WR Pointer Low Byte (ERXWRPT<7:0>)
|
||
|
#define ENC28J60_ERXWRPTH (0x000F) // RX WR Pointer High Byte (ERXWRPT<12:8>)
|
||
|
#define ENC28J60_EDMASTL (0x0010) // DMA Start Low Byte (EDMAST<7:0>)
|
||
|
#define ENC28J60_EDMASTH (0x0011) // DMA Start High Byte (EDMAST<12:8>)
|
||
|
#define ENC28J60_EDMANDL (0x0012) // DMA End Low Byte (EDMAND<7:0>)
|
||
|
#define ENC28J60_EDMANDH (0x0013) // DMA End High Byte (EDMAND<12:8>)
|
||
|
#define ENC28J60_EDMADSTL (0x0014) // DMA Destination Low Byte (EDMADST<7:0>)
|
||
|
#define ENC28J60_EDMADSTH (0x0015) // DMA Destination High Byte (EDMADST<12:8>)
|
||
|
#define ENC28J60_EDMACSL (0x0016) // DMA Checksum Low Byte (EDMACS<7:0>)
|
||
|
#define ENC28J60_EDMACSH (0x0017) // DMA Checksum High Byte (EDMACS<15:8>)
|
||
|
|
||
|
// Bank 1 Registers
|
||
|
#define ENC28J60_EHT0 (0x0100) // Hash Table Byte 0 (EHT<7:0>)
|
||
|
#define ENC28J60_EHT1 (0x0101) // Hash Table Byte 1 (EHT<15:8>)
|
||
|
#define ENC28J60_EHT2 (0x0102) // Hash Table Byte 2 (EHT<23:16>)
|
||
|
#define ENC28J60_EHT3 (0x0103) // Hash Table Byte 3 (EHT<31:24>)
|
||
|
#define ENC28J60_EHT4 (0x0104) // Hash Table Byte 4 (EHT<39:32>)
|
||
|
#define ENC28J60_EHT5 (0x0105) // Hash Table Byte 5 (EHT<47:40>)
|
||
|
#define ENC28J60_EHT6 (0x0106) // Hash Table Byte 6 (EHT<55:48>)
|
||
|
#define ENC28J60_EHT7 (0x0107) // Hash Table Byte 7 (EHT<63:56>)
|
||
|
#define ENC28J60_EPMM0 (0x0108) // Pattern Match Mask Byte 0 (EPMM<7:0>)
|
||
|
#define ENC28J60_EPMM1 (0x0109) // Pattern Match Mask Byte 1 (EPMM<15:8>)
|
||
|
#define ENC28J60_EPMM2 (0x010A) // Pattern Match Mask Byte 2 (EPMM<23:16>)
|
||
|
#define ENC28J60_EPMM3 (0x010B) // Pattern Match Mask Byte 3 (EPMM<31:24>)
|
||
|
#define ENC28J60_EPMM4 (0x010C) // Pattern Match Mask Byte 4 (EPMM<39:32>)
|
||
|
#define ENC28J60_EPMM5 (0x010D) // Pattern Match Mask Byte 5 (EPMM<47:40>)
|
||
|
#define ENC28J60_EPMM6 (0x010E) // Pattern Match Mask Byte 6 (EPMM<55:48>)
|
||
|
#define ENC28J60_EPMM7 (0x010F) // Pattern Match Mask Byte 7 (EPMM<63:56>)
|
||
|
#define ENC28J60_EPMCSL (0x0110) // Pattern Match Checksum Low Byte (EPMCS<7:0>)
|
||
|
#define ENC28J60_EPMCSH (0x0111) // Pattern Match Checksum High Byte (EPMCS<15:0>)
|
||
|
#define ENC28J60_EPMOL (0x0114) // Pattern Match Offset Low Byte (EPMO<7:0>)
|
||
|
#define ENC28J60_EPMOH (0x0115) // Pattern Match Offset High Byte (EPMO<12:8>)
|
||
|
#define ENC28J60_ERXFCON (0x0118) // Receive Fileter Control
|
||
|
#define ENC28J60_EPKTCNT (0x0119) // Ethernet Packet Count
|
||
|
|
||
|
// Bank 2 Register
|
||
|
#define ENC28J60_MACON1 (0x1200) // MAC Control Register 1
|
||
|
#define ENC28J60_MACON2 (0x1201) // MAC Control Register 2
|
||
|
#define ENC28J60_MACON3 (0x1202) // MAC Control Register 3
|
||
|
#define ENC28J60_MACON4 (0x1203) // MAC Control Register 4
|
||
|
#define ENC28J60_MABBIPG (0x1204) // Back-to-Back Inter-Packet Gap (BBIPG<6:0>)
|
||
|
#define ENC28J60_MAIPGL (0x1206) // Non-Back-to-Back Inter-Packet Gap Low Byte (MAIPGL<6:0>)
|
||
|
#define ENC28J60_MAIPGH (0x1207) // Non-Back-to-Back Inter-Packet Gap High Byte (MAIPGH<6:0>)
|
||
|
#define ENC28J60_MACLCON1 (0x1208) // Retransmission Maximum (RETMAX<3:0>)
|
||
|
#define ENC28J60_MACLCON2 (0x1209) // Collision Window (COLWIN<5:0>)
|
||
|
#define ENC28J60_MAMXFLL (0x120A) // Maximum Frame Length Low Byte (MAMXFL<7:0>)
|
||
|
#define ENC28J60_MAMXFLH (0x120B) // Maximum Frame Length High Byte (MAMXFL<15:8>)
|
||
|
#define ENC28J60_MICMD (0x1212) // MII Command Register
|
||
|
#define ENC28J60_MIREGADR (0x1214) // MII Register Address (MIREGADR<4:0>)
|
||
|
#define ENC28J60_MIWRL (0x1216) // MII Write Data Low Byte (MIWR<7:0>)
|
||
|
#define ENC28J60_MIWRH (0x1217) // MII Write Data High Byte (MIWR<15:8>)
|
||
|
#define ENC28J60_MIRDL (0x1218) // MII Read Data Low Byte (MIRD<7:0>)
|
||
|
#define ENC28J60_MIRDH (0x1219) // MII Read Data High Byte(MIRD<15:8>)
|
||
|
|
||
|
// Bank 3 Registers
|
||
|
#define ENC28J60_MAADR5 (0x1300) // MAC Address Byte 5 (MAADR<15:8>)
|
||
|
#define ENC28J60_MAADR6 (0x1301) // MAC Address Byte 6 (MAADR<7:0>)
|
||
|
#define ENC28J60_MAADR3 (0x1302) // MAC Address Byte 3 (MAADR<31:24>), OUI Byte 3
|
||
|
#define ENC28J60_MAADR4 (0x1303) // MAC Address Byte 4 (MAADR<23:16>)
|
||
|
#define ENC28J60_MAADR1 (0x1304) // MAC Address Byte 1 (MAADR<47:40>), OUI Byte 1
|
||
|
#define ENC28J60_MAADR2 (0x1305) // MAC Address Byte 2 (MAADR<39:32>), OUI Byte 2
|
||
|
#define ENC28J60_EBSTSD (0x0306) // Built-in Self-Test Fill Seed (EBSTSD<7:0>)
|
||
|
#define ENC28J60_EBSTCON (0x0307) // Built-in Self-Test Control
|
||
|
#define ENC28J60_EBSTCSL (0x0308) // Built-in Self-Test Checksum Low Byte (EBSTCS<7:0>)
|
||
|
#define ENC28J60_EBSTCSH (0x0309) // Built-in Self-Test Checksum High Byte (EBSTCS<15:8>)
|
||
|
#define ENC28J60_MISTAT (0x130A) // MII Status Register
|
||
|
#define ENC28J60_EREVID (0x0312) // Ethernet Revision ID (EREVID<4:0>)
|
||
|
#define ENC28J60_ECOCON (0x0315) // Clock Output Control Register
|
||
|
#define ENC28J60_EFLOCON (0x0317) // Ethernet Flow Control
|
||
|
#define ENC28J60_EPAUSL (0x0318) // Pause Timer Value Low Byte (EPAUS<7:0>)
|
||
|
#define ENC28J60_EPAUSH (0x0319) // Pause Timer Value High Byte (EPAUS<15:8>)
|
||
|
|
||
|
/**
|
||
|
* @brief status and flag of ENC28J60 specific registers
|
||
|
*
|
||
|
*/
|
||
|
// EIE bit definitions
|
||
|
#define EIE_INTIE (1<<7) // Global INT Interrupt Enable
|
||
|
#define EIE_PKTIE (1<<6) // Receive Packet Pending Interrupt Enable
|
||
|
#define EIE_DMAIE (1<<5) // DMA Interrupt Enable
|
||
|
#define EIE_LINKIE (1<<4) // Link Status Change Interrupt Enable
|
||
|
#define EIE_TXIE (1<<3) // Transmit Enable
|
||
|
#define EIE_TXERIE (1<<1) // Transmit Error Interrupt Enable
|
||
|
#define EIE_RXERIE (1<<0) // Receive Error Interrupt Enable
|
||
|
|
||
|
// EIR bit definitions
|
||
|
#define EIR_PKTIF (1<<6) // Receive Packet Pending Interrupt Flag
|
||
|
#define EIR_DMAIF (1<<5) // DMA Interrupt Flag
|
||
|
#define EIR_LINKIF (1<<4) // Link Change Interrupt Flag
|
||
|
#define EIR_TXIF (1<<3) // Transmit Interrupt Flag
|
||
|
#define EIR_TXERIF (1<<1) // Transmit Error Interrupt Flag
|
||
|
#define EIR_RXERIF (1<<0) // Receive Error Interrupt Flag
|
||
|
|
||
|
// ESTAT bit definitions
|
||
|
#define ESTAT_INT (1<<7) // INT Interrupt Flag
|
||
|
#define ESTAT_BUFER (1<<6) // Buffer Error Status
|
||
|
#define ESTAT_LATECOL (1<<4) // Late Collision Error
|
||
|
#define ESTAT_RXBUSY (1<<2) // Receive Busy
|
||
|
#define ESTAT_TXABRT (1<<1) // Transmit Abort Error
|
||
|
#define ESTAT_CLKRDY (1<<0) // Clock Ready
|
||
|
|
||
|
// ECON2 bit definitions
|
||
|
#define ECON2_AUTOINC (1<<7) // Automatic Buffer Pointer Increment Enable
|
||
|
#define ECON2_PKTDEC (1<<6) // Packet Decrement
|
||
|
#define ECON2_PWRSV (1<<5) // Power Save Enable
|
||
|
#define ECON2_VRPS (1<<3) // Voltage Regulator Power Save Enable
|
||
|
|
||
|
// ECON1 bit definitions
|
||
|
#define ECON1_TXRST (1<<7) // Transmit Logic Reset
|
||
|
#define ECON1_RXRST (1<<6) // Receive Logic Reset
|
||
|
#define ECON1_DMAST (1<<5) // DMA Start and Busy Status
|
||
|
#define ECON1_CSUMEN (1<<4) // DMA Checksum Enable
|
||
|
#define ECON1_TXRTS (1<<3) // Transmit Request to Send
|
||
|
#define ECON1_RXEN (1<<2) // Receive Enable
|
||
|
#define ECON1_BSEL1 (1<<1) // Bank Select1
|
||
|
#define ECON1_BSEL0 (1<<0) // Bank Select0
|
||
|
|
||
|
// ERXFCON bit definitions
|
||
|
#define ERXFCON_UCEN (1<<7) // Unicast Filter Enable
|
||
|
#define ERXFCON_ANDOR (1<<6) // AND/OR Filter Select
|
||
|
#define ERXFCON_CRCEN (1<<5) // Post-Filter CRC Check Enable
|
||
|
#define ERXFCON_PMEN (1<<4) // Pattern Match Filter Enable
|
||
|
#define ERXFCON_MPEN (1<<3) // Magic Packet Filter Enable
|
||
|
#define ERXFCON_HTEN (1<<2) // Hash Table Filter Enable
|
||
|
#define ERXFCON_MCEN (1<<1) // Multicast Filter Enable
|
||
|
#define ERXFCON_BCEN (1<<0) // Broadcast Filter Enable
|
||
|
|
||
|
// MACON1 bit definitions
|
||
|
#define MACON1_TXPAUS (1<<3) // Pause Control Frame Transmission Enable
|
||
|
#define MACON1_RXPAUS (1<<2) // Pause Control Frame Reception Enable
|
||
|
#define MACON1_PASSALL (1<<1) // Pass All Received Frames Enable
|
||
|
#define MACON1_MARXEN (1<<0) // MAC Receive Enable
|
||
|
|
||
|
// MACON3 bit definitions
|
||
|
#define MACON3_PADCFG2 (1<<7) // Automatic Pad and CRC Configuration bit 2
|
||
|
#define MACON3_PADCFG1 (1<<6) // Automatic Pad and CRC Configuration bit 1
|
||
|
#define MACON3_PADCFG0 (1<<5) // Automatic Pad and CRC Configuration bit 0
|
||
|
#define MACON3_TXCRCEN (1<<4) // Transmit CRC Enable
|
||
|
#define MACON3_PHDRLEN (1<<3) // Proprietary Header Enable
|
||
|
#define MACON3_HFRMLEN (1<<2) // Huge Frame Enable
|
||
|
#define MACON3_FRMLNEN (1<<1) // Frame Length Checking Enable
|
||
|
#define MACON3_FULDPX (1<<0) // MAC Full-Duplex Enable
|
||
|
|
||
|
// MACON4 bit definitions
|
||
|
#define MACON4_DEFER (1<<6) // Defer Transmission Enable
|
||
|
#define MACON4_BPEN (1<<5) // No Backoff During Backpressure Enable
|
||
|
#define MACON4_NOBKFF (1<<4) // No Backoff Enable
|
||
|
|
||
|
// MICMD bit definitions
|
||
|
#define MICMD_MIISCAN (1<<1) // MII Scan Enable
|
||
|
#define MICMD_MIIRD (1<<0) // MII Read Enable
|
||
|
|
||
|
// EBSTCON bit definitions
|
||
|
#define EBSTCON_PSV2 (1<<7) // Pattern Shift Value 2
|
||
|
#define EBSTCON_PSV1 (1<<6) // Pattern Shift Value 1
|
||
|
#define EBSTCON_PSV0 (1<<5) // Pattern Shift Value 0
|
||
|
#define EBSTCON_PSEL (1<<4) // Port Select
|
||
|
#define EBSTCON_TMSEL1 (1<<3) // Test Mode Select 1
|
||
|
#define EBSTCON_TMSEL0 (1<<2) // Test Mode Select 0
|
||
|
#define EBSTCON_TME (1<<1) // Test Mode Enable
|
||
|
#define EBSTCON_BISTST (1<<0) // Built-in Self-Test Start/Busy
|
||
|
|
||
|
// MISTAT bit definitions
|
||
|
#define MISTAT_NVALID (1<<2) // MII Management Read Data Not Valid
|
||
|
#define MISTAT_SCAN (1<<1) // MII Management Scan Operation in Progress
|
||
|
#define MISTAT_BUSY (1<<0) // MII Management Busy
|
||
|
|
||
|
// EFLOCON bit definitions
|
||
|
#define EFLOCON_FULDPXS (1<<2) // Full-Duplex Shadown
|
||
|
#define EFLOCON_FCEN1 (1<<1) // Flow Control Enable 1
|
||
|
#define EFLOCON_FCEN0 (1<<0) // Flow Control Enable 0
|
||
|
|
||
|
#ifdef __cplusplus
|
||
|
}
|
||
|
#endif
|