mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/components/freemodbus/Kconfig

165 wiersze
6.2 KiB
Plaintext
Czysty Zwykły widok Historia

examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
menu "Modbus configuration"
freemodbus: add modbus master ascii add support of modbus master ascii rename base dir name of master and slave example to be mb_slave, mb_master to avoid conflict with sdio/slave example test add Kconfig option to enable ASCII and RTU mode separately update ASCII options + remove cast for errors added baudrate for examples into Kconfig updated magic numbers for timer timeout put ascii private definitions into one file
2019-11-26 05:16:25 +00:00
config FMB_COMM_MODE_RTU_EN
bool "Enable Modbus stack support for RTU mode"
default y
help
Enable RTU Modbus communication mode option for Modbus serial stack.
config FMB_COMM_MODE_ASCII_EN
bool "Enable Modbus stack support for ASCII mode"
default y
help
Enable ASCII Modbus communication mode option for Modbus serial stack.
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_MASTER_TIMEOUT_MS_RESPOND
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
int "Slave respond timeout (Milliseconds)"
default 150
range 50 400
help
If master sends a frame which is not broadcast, it has to wait sometime for slave response.
if slave is not respond in this time, the master will process timeout error.
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_MASTER_DELAY_MS_CONVERT
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
int "Slave conversion delay (Milliseconds)"
default 200
range 50 400
help
If master sends a broadcast frame, it has to wait conversion time to delay,
then master can send next frame.
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_QUEUE_LENGTH
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus serial task queue length"
range 0 200
default 20
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus serial driver queue length. It is used by event queue task.
See the serial driver API for more information.
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_SERIAL_TASK_STACK_SIZE
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus serial task stack size"
range 768 8192
default 2048
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus serial task stack size for event queue task.
It may be adjusted when debugging is enabled (for example).
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_SERIAL_BUF_SIZE
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus serial task RX/TX buffer size"
range 0 2048
default 256
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus serial task RX and TX buffer size for UART driver initialization.
This buffer is used for modbus frame transfer. The Modbus protocol maximum
frame size is 256 bytes. Bigger size can be used for non standard implementations.
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
freemodbus: add modbus master ascii add support of modbus master ascii rename base dir name of master and slave example to be mb_slave, mb_master to avoid conflict with sdio/slave example test add Kconfig option to enable ASCII and RTU mode separately update ASCII options + remove cast for errors added baudrate for examples into Kconfig updated magic numbers for timer timeout put ascii private definitions into one file
2019-11-26 05:16:25 +00:00
config FMB_SERIAL_ASCII_BITS_PER_SYMB
int "Number of data bits per ASCII character"
default 8
range 7 8
depends on FMB_COMM_MODE_ASCII_EN
help
This option defines the number of data bits per ASCII character.
config FMB_SERIAL_ASCII_TIMEOUT_RESPOND_MS
int "Response timeout for ASCII communication mode (ms)"
default 1000
range 300 2000
depends on FMB_COMM_MODE_ASCII_EN
help
This option defines response timeout of slave in milliseconds for ASCII communication mode.
Thus the timeout will expire and allow the master’s program to handle the error.
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_SERIAL_TASK_PRIO
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus serial task priority"
range 3 10
default 10
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus UART driver event task priority.
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
The priority of Modbus controller task is equal to (CONFIG_FMB_SERIAL_TASK_PRIO - 1).
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_CONTROLLER_SLAVE_ID_SUPPORT
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
bool "Modbus controller slave ID support"
default n
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus slave ID support enable.
When enabled the Modbus <Report Slave ID> command is supported by stack.
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_CONTROLLER_SLAVE_ID
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
hex "Modbus controller slave ID"
range 0 4294967295
default 0x00112233
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
depends on FMB_CONTROLLER_SLAVE_ID_SUPPORT
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus slave ID value to identify modbus device
in the network using <Report Slave ID> command.
Most significant byte of ID is used as short device ID and
other three bytes used as long ID.
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_CONTROLLER_NOTIFY_TIMEOUT
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus controller notification timeout (ms)"
range 0 200
default 20
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus controller notification timeout in milliseconds.
This timeout is used to send notification about accessed parameters.
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_CONTROLLER_NOTIFY_QUEUE_SIZE
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus controller notification queue size"
range 0 200
default 20
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus controller notification queue size.
The notification queue is used to get information about accessed parameters.
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_CONTROLLER_STACK_SIZE
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus controller stack size"
range 0 8192
default 4096
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus controller task stack size. The Stack size may be adjusted when
debug mode is used which requires more stack size (for example).
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_EVENT_QUEUE_TIMEOUT
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus stack event queue timeout (ms)"
range 0 500
default 20
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus stack event queue timeout in milliseconds. This may help to optimize
Modbus stack event processing time.
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_TIMER_PORT_ENABLED
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
bool "Modbus slave stack use timer for 3.5T symbol time measurement"
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
default y
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
If this option is set the Modbus stack uses timer for T3.5 time measurement.
Else the internal UART TOUT timeout is used for 3.5T symbol time measurement.
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_TIMER_GROUP
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus Timer group number"
range 0 1
default 0
help
freemodbus: fix nvs access failure place timer handler functions into IRAM update timer port handlers fix communication issues fix offset issue in example add kconfig option to place handlers into IRAM
2019-11-08 08:55:42 +00:00
Modbus Timer group number that is used for timeout measurement.
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
Rename Kconfig options (components/freemodbus)
2019-04-26 16:47:21 +00:00
config FMB_TIMER_INDEX
Correct Kconfigs according to the coding style
2019-01-25 16:10:53 +00:00
int "Modbus Timer index in the group"
range 0 1
default 0
help
freemodbus: Fix bug with incorrect coils read mask Contains two different component folders per each implementation (serial_master and serial_slave) with concrete ports. Added common public api for master and slave and common interface for master and slave implementation. Add support of cmake system (added cmake files). Added sdkconfig.defaults files for slave and master modbus examples. Updated make file and KConfig for freemodbus component Update according to review and fix doxygen warnings Fix Doxyfile to pass documentation build Update headers and change interface file names as per review comments Merge branch feature/freemodbus_move_rs485_mode_control Update after review: The stack modbus folder updated to support master and slave ports together and moved into freemodbus/modbus Stack and port files updated to remove duplicated simbols Make file, KConfig and CMakeLists.txt updated to compile master and slave stacks, common interface and concrete implementations of ports Stack callback functions execute callbacks using interface pointer from concrete port implementation User can instantiate any of concrete port using common API (only one concrete port at a time) and it does not require to select port by KConfig Port pins and mode configuration moved into example files from port files to allow user select pins and port mode (customer request) Changes tested using pymodbus, ModbusPoll and communication between two boards Updated DoxyFile according to public include path Fix maximum instance size for slave (merge from master of customer issue) Fix critical section issue TW#28622 (change spin lock based critical section to semaphore) Move serial port files into component port folder for master and slave accordingly Fix example issue showed in the log when IO slave is not configured correctly Fix conflicts while merging from origin/master Fix errors handling in modbus controller interface + some final corrections according to review Update maximum allowed number of slaves in the network segment Fix bug with incorrect coils read mask Closes https://github.com/espressif/esp-idf/issues/858
2018-10-19 13:51:27 +00:00
Modbus Timer Index in the group that is used for timeout measurement.
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
freemodbus: configure timer handler placement place timer interrupt handler into flash by default; add default settings for timer and UART interrupts to place them into IRAM into example defaults; CONFIG_FMB_TIMER_PORT_ENABLED default = n, when enabled, the UART_ISR_IN_IRAM set to y
2019-11-12 14:16:55 +00:00
config FMB_TIMER_ISR_IN_IRAM
bool "Place timer interrupt handler into IRAM"
default n
freemodbus: fix nvs access failure place timer handler functions into IRAM update timer port handlers fix communication issues fix offset issue in example add kconfig option to place handlers into IRAM
2019-11-08 08:55:42 +00:00
select UART_ISR_IN_IRAM
help
freemodbus: configure timer handler placement place timer interrupt handler into flash by default; add default settings for timer and UART interrupts to place them into IRAM into example defaults; CONFIG_FMB_TIMER_PORT_ENABLED default = n, when enabled, the UART_ISR_IN_IRAM set to y
2019-11-12 14:16:55 +00:00
This option places Modbus timer IRQ handler into IRAM.
freemodbus: fix nvs access failure place timer handler functions into IRAM update timer port handlers fix communication issues fix offset issue in example add kconfig option to place handlers into IRAM
2019-11-08 08:55:42 +00:00
This allows to avoid delays related to processing of non-IRAM-safe interrupts
during a flash write operation (NVS updating a value, or some other
flash API which has to perform an read/write operation and disable CPU cache).
freemodbus: configure timer handler placement place timer interrupt handler into flash by default; add default settings for timer and UART interrupts to place them into IRAM into example defaults; CONFIG_FMB_TIMER_PORT_ENABLED default = n, when enabled, the UART_ISR_IN_IRAM set to y
2019-11-12 14:16:55 +00:00
This option has dependency with the UART_ISR_IN_IRAM option which places UART interrupt
handler into IRAM to prevent delays related to processing of UART events.
freemodbus: fix nvs access failure place timer handler functions into IRAM update timer port handlers fix communication issues fix offset issue in example add kconfig option to place handlers into IRAM
2019-11-08 08:55:42 +00:00
examples: freemodbus port slave basic implementation This example adds functionality to support basic communication in RS485 networks using Modbus protocol. This example uses FreeModbus stack and regular UART driver API to communicate in RS485 half duplex mode. Added initial support of modbus controller pure C api to access device parameters over Modbus transport. Move freemodbus stack and port files into components folder Move the modbus_controller interface into components idf folder Source files updated after review. Add modbus interface documentation docs/en/api-reference/protocols/modbus.rst porttimer.c: fix bug with timer1 selected in the Kconfig Add support of cmake system (added cmake files) Closes https://github.com/espressif/esp-idf/issues/858
2018-06-28 15:45:41 +00:00
endmenu