esp-idf/components/esptool_py/Kconfig.projbuild

222 wiersze
5.8 KiB
Plaintext
Czysty Zwykły widok Historia

2016-08-17 15:08:22 +00:00
menu "Serial flasher config"
config ESPTOOLPY_PORT
string "Default serial port"
default "/dev/ttyUSB0"
help
The serial port that's connected to the ESP chip. This can be overridden by setting the ESPPORT
environment variable.
choice ESPTOOLPY_BAUD
prompt "Default baud rate"
default ESPTOOLPY_BAUD_115200B
help
Default baud rate to use while communicating with the ESP chip. Can be overridden by
setting the ESPBAUD variable.
config ESPTOOLPY_BAUD_115200B
bool "115200 baud"
config ESPTOOLPY_BAUD_230400B
bool "230400 baud"
config ESPTOOLPY_BAUD_921600B
bool "921600 baud"
config ESPTOOLPY_BAUD_2MB
bool "2Mbaud"
config ESPTOOLPY_BAUD_OTHER
bool "Other baud rate"
endchoice
config ESPTOOLPY_BAUD_OTHER_VAL
int "Other baud rate value" if ESPTOOLPY_BAUD_OTHER
default 115200
config ESPTOOLPY_BAUD
int
default 115200 if ESPTOOLPY_BAUD_115200B
default 230400 if ESPTOOLPY_BAUD_230400B
default 921600 if ESPTOOLPY_BAUD_921600B
default 2000000 if ESPTOOLPY_BAUD_2MB
default ESPTOOLPY_BAUD_OTHER_VAL if ESPTOOLPY_BAUD_OTHER
config ESPTOOLPY_COMPRESSED
bool "Use compressed upload"
default "y"
help
The flasher tool can send data compressed using zlib, letting the ROM on the ESP chip
decompress it on the fly before flashing it. For most payloads, this should result in a
speed increase.
choice ESPTOOLPY_FLASHMODE
prompt "Flash SPI mode"
default ESPTOOLPY_FLASHMODE_DIO
help
Mode the flash chip is flashed in, as well as the default mode for the
binary to run in.
config ESPTOOLPY_FLASHMODE_QIO
bool "QIO"
config ESPTOOLPY_FLASHMODE_QOUT
bool "QOUT"
config ESPTOOLPY_FLASHMODE_DIO
bool "DIO"
config ESPTOOLPY_FLASHMODE_DOUT
bool "DOUT"
endchoice
config ESPTOOLPY_FLASHMODE
string
default "qio" if ESPTOOLPY_FLASHMODE_QIO
default "qout" if ESPTOOLPY_FLASHMODE_QOUT
default "dio" if ESPTOOLPY_FLASHMODE_DIO
default "dout" if ESPTOOLPY_FLASHMODE_DOUT
2016-09-02 04:29:01 +00:00
choice ESPTOOLPY_FLASHFREQ
prompt "Flash SPI speed"
default ESPTOOLPY_FLASHFREQ_40M
help
The SPI flash frequency to be used.
config ESPTOOLPY_FLASHFREQ_80M
bool "80 MHz"
config ESPTOOLPY_FLASHFREQ_40M
bool "40 MHz"
config ESPTOOLPY_FLASHFREQ_26M
bool "26 MHz"
config ESPTOOLPY_FLASHFREQ_20M
bool "20 MHz"
endchoice
config ESPTOOLPY_FLASHFREQ
string
default "80m" if ESPTOOLPY_FLASHFREQ_80M
default "40m" if ESPTOOLPY_FLASHFREQ_40M
default "26m" if ESPTOOLPY_FLASHFREQ_26M
default "20m" if ESPTOOLPY_FLASHFREQ_20M
choice ESPTOOLPY_FLASHSIZE
prompt "Flash size"
default ESPTOOLPY_FLASHSIZE_2MB
help
SPI flash size, in megabytes
config ESPTOOLPY_FLASHSIZE_1MB
bool "1 MB"
config ESPTOOLPY_FLASHSIZE_2MB
bool "2 MB"
config ESPTOOLPY_FLASHSIZE_4MB
bool "4 MB"
config ESPTOOLPY_FLASHSIZE_8MB
bool "8 MB"
config ESPTOOLPY_FLASHSIZE_16MB
bool "16 MB"
endchoice
config ESPTOOLPY_FLASHSIZE
string
default "1MB" if ESPTOOLPY_FLASHSIZE_1MB
default "2MB" if ESPTOOLPY_FLASHSIZE_2MB
default "4MB" if ESPTOOLPY_FLASHSIZE_4MB
default "8MB" if ESPTOOLPY_FLASHSIZE_8MB
default "16MB" if ESPTOOLPY_FLASHSIZE_16MB
config ESPTOOLPY_FLASHSIZE_DETECT
bool "Detect flash size when flashing bootloader"
default y
help
If this option is set, 'make flash' targets will automatically detect
the flash size and update the bootloader image when flashing.
choice ESPTOOLPY_BEFORE
prompt "Before flashing"
default ESPTOOLPY_BEFORE_RESET
help
Configure whether esptool.py should reset the ESP32 before flashing.
Automatic resetting depends on the RTS & DTR signals being
wired from the serial port to the ESP32. Most USB development
boards do this internally.
The "Reset with ESP32R0 Windows workaround" option works
around an automatic reset bug in hardware, when using Windows
with some development boards. This fix only works if you're
using a silicon revision 0 ESP32.
config ESPTOOLPY_BEFORE_RESET
bool "Reset to bootloader"
config ESPTOOLPY_BEFORE_NORESET
bool "No reset"
config ESPTOOLPY_BEFORE_ESP32R0
bool "Reset with ESP32R0 Windows workaround"
endchoice
config ESPTOOLPY_BEFORE
string
default "default_reset" if ESPTOOLPY_BEFORE_RESET
default "no_reset" if ESPTOOLPY_BEFORE_NORESET
default "esp32r0" if ESPTOOLPY_BEFORE_ESP32R0
choice ESPTOOLPY_AFTER
prompt "After flashing"
default ESPTOOLPY_AFTER_RESET
help
Configure whether esptool.py should reset the ESP32 after flashing.
Automatic resetting depends on the RTS & DTR signals being
wired from the serial port to the ESP32. Most USB development
boards do this internally.
config ESPTOOLPY_AFTER_RESET
bool "Reset after flashing"
config ESPTOOLPY_AFTER_NORESET
bool "Stay in bootloader"
endchoice
config ESPTOOLPY_AFTER
string
default "hard_reset" if ESPTOOLPY_AFTER_RESET
default "no_reset" if ESPTOOLPY_AFTER_NORESET
choice MONITOR_BAUD
prompt "'make monitor' baud rate"
default MONITOR_BAUD_115200B
help
Baud rate to use when running 'make monitor' to view serial output
from a running chip.
Can override by setting the MONITORBAUD environment variable.
config MONITOR_BAUD_9600B
bool "9600 bps"
config MONITOR_BAUD_57600B
bool "57600 bps"
config MONITOR_BAUD_115200B
bool "115200 bps"
config MONITOR_BAUD_230400B
bool "230400 bps"
config MONITOR_BAUD_921600B
bool "921600 bps"
config MONITOR_BAUD_2MB
bool "2 Mbps"
config MONITOR_BAUD_OTHER
bool "Custom baud rate"
endchoice
config MONITOR_BAUD_OTHER_VAL
int "Custom baud rate value" if MONITOR_BAUD_OTHER
default 115200
config MONITOR_BAUD
int
default 9600 if MONITOR_BAUD_9600B
default 57600 if MONITOR_BAUD_57600B
default 115200 if MONITOR_BAUD_115200B
default 230400 if MONITOR_BAUD_230400B
default 921600 if MONITOR_BAUD_921600B
default 2000000 if MONITOR_BAUD_2MB
default MONITOR_BAUD_OTHER_VAL if MONITOR_BAUD_OTHER
2016-08-17 15:08:22 +00:00
endmenu