esp-idf/examples/ethernet/iperf/partitions_example.csv

# Name,   Type, SubType, Offset,  Size, Flags
# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap
nvs,      data, nvs,     0x9000,  0x6000,
phy_init, data, phy,     0xf000,  0x1000,
factory,  app,  factory, 0x10000, 1M,
storage,  data, fat,     ,        1M,
ethernet: add iperf example to test real bandwidth 1. Add command for Ethernet based on console component. 2. Make cmd_system and iperf a component that can be referenced by other examples 3. Add "version" command to cmd_system.c 4. Clean up the README.md in all ethernet examples[TW#26525] 2018-09-20 11:26:14 +00:00			`# Name, Type, SubType, Offset, Size, Flags`
global: update note in the partition tables The build system automatically determines offsets of partitions from the partition table, so no manual changes are needed. Instead, add a note that partition offsets may need to be updated when increasing the bootloader size. 2019-07-27 08:27:38 +00:00			`# Note: if you have increased the bootloader size, make sure to update the offsets to avoid overlap`
ethernet: add iperf example to test real bandwidth 1. Add command for Ethernet based on console component. 2. Make cmd_system and iperf a component that can be referenced by other examples 3. Add "version" command to cmd_system.c 4. Clean up the README.md in all ethernet examples[TW#26525] 2018-09-20 11:26:14 +00:00			`nvs, data, nvs, 0x9000, 0x6000,`
			`phy_init, data, phy, 0xf000, 0x1000,`
			`factory, app, factory, 0x10000, 1M,`
			`storage, data, fat, , 1M,`