esp-idf/components/hal/esp32/adc_hal.c

87 wiersze
3.0 KiB
C
Czysty Zwykły widok Historia

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// The HAL layer for ADC (common part)
#include "hal/adc_hal.h"
#include "hal/adc_hal_conf.h"
#include "hal/adc_types.h"
void adc_hal_digi_init(void)
{
adc_hal_init();
adc_ll_digi_set_clk_div(SOC_ADC_DIGI_SAR_CLK_DIV_DEFAULT);
}
void adc_hal_digi_deinit(void)
{
adc_ll_digi_clear_pattern_table(ADC_NUM_1);
adc_ll_digi_clear_pattern_table(ADC_NUM_2);
adc_hal_deinit();
}
void adc_hal_digi_controller_config(const adc_digi_config_t *cfg)
{
/* If enable digital controller, adc xpd should always on. */
adc_ll_set_power_manage(ADC_POWER_SW_ON);
/* Single channel mode or multi channel mode. */
adc_ll_digi_set_convert_mode(cfg->conv_mode);
if (cfg->conv_mode & ADC_CONV_SINGLE_UNIT_1) {
adc_ll_set_controller(ADC_NUM_1, ADC_CTRL_DIG);
if (cfg->adc1_pattern_len) {
adc_ll_digi_clear_pattern_table(ADC_NUM_1);
adc_ll_digi_set_pattern_table_len(ADC_NUM_1, cfg->adc1_pattern_len);
for (int i = 0; i < cfg->adc1_pattern_len; i++) {
adc_ll_digi_set_pattern_table(ADC_NUM_1, i, cfg->adc1_pattern[i]);
}
}
}
if (cfg->conv_mode & ADC_CONV_SINGLE_UNIT_2) {
adc_ll_set_controller(ADC_NUM_2, ADC_CTRL_DIG);
if (cfg->adc2_pattern_len) {
adc_ll_digi_clear_pattern_table(ADC_NUM_2);
adc_ll_digi_set_pattern_table_len(ADC_NUM_2, cfg->adc2_pattern_len);
for (int i = 0; i < cfg->adc2_pattern_len; i++) {
adc_ll_digi_set_pattern_table(ADC_NUM_2, i, cfg->adc2_pattern[i]);
}
}
}
adc_ll_digi_set_output_format(cfg->format);
if (cfg->conv_limit_en) {
adc_ll_digi_set_convert_limit_num(cfg->conv_limit_num);
adc_ll_digi_convert_limit_enable();
} else {
adc_ll_digi_convert_limit_disable();
}
adc_ll_digi_set_data_source(ADC_I2S_DATA_SRC_ADC);
}
int adc_hal_hall_convert(void)
{
int Sens_Vp0;
int Sens_Vn0;
int Sens_Vp1;
int Sens_Vn1;
int hall_value;
// convert for 4 times with different phase and outputs
adc_ll_hall_phase_disable(); // hall phase
adc_hal_convert( ADC_NUM_1, ADC_CHANNEL_0, &Sens_Vp0 );
adc_hal_convert( ADC_NUM_1, ADC_CHANNEL_3, &Sens_Vn0 );
adc_ll_hall_phase_enable();
adc_hal_convert( ADC_NUM_1, ADC_CHANNEL_0, &Sens_Vp1 );
adc_hal_convert( ADC_NUM_1, ADC_CHANNEL_3, &Sens_Vn1 );
hall_value = (Sens_Vp1 - Sens_Vp0) - (Sens_Vn1 - Sens_Vn0);
return hall_value;
}