esp-idf/examples/protocols/asio/udp_echo_server/README.md

# Asio UDP echo server example

Simple Asio UDP echo server using WiFi STA or Ethernet.

## Example workflow

- Wi-Fi or Ethernet connection is established, and IP address is obtained.
- Asio UDP server is started on port number defined through `make menuconfig`
- Server receives and echoes back messages transmitted from client

## Running the example

- Run `make menuconfig` to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
- Set server port number in menuconfig, "Example configuration".
- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal.
- Wait for the board to connect to WiFi or Ethernet (note the IP address).
- You can now send a UDP message and check it is repeated, for example using netcat `nc -u IP PORT`.

See the README.md file in the upper level 'examples' directory for more information about examples.
examples/protocols/asio: use common network component 2018-11-20 16:44:31 +00:00			`# Asio UDP echo server example`
asio: initial idf port of asio library without ssl 2018-05-29 09:25:24 +00:00
examples/protocols/asio: use common network component 2018-11-20 16:44:31 +00:00			`Simple Asio UDP echo server using WiFi STA or Ethernet.`
asio: initial idf port of asio library without ssl 2018-05-29 09:25:24 +00:00
			`## Example workflow`

examples/protocols/asio: use common network component 2018-11-20 16:44:31 +00:00			`- Wi-Fi or Ethernet connection is established, and IP address is obtained.`
			- Asio UDP server is started on port number defined through `make menuconfig`
asio: initial idf port of asio library without ssl 2018-05-29 09:25:24 +00:00			`- Server receives and echoes back messages transmitted from client`

			`## Running the example`

examples/protocols/asio: use common network component 2018-11-20 16:44:31 +00:00			- Run `make menuconfig` to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in [examples/protocols/README.md](../../README.md) for more details.
			`- Set server port number in menuconfig, "Example configuration".`
			- Run `make flash monitor` to build and upload the example to your board and connect to it's serial terminal.
			`- Wait for the board to connect to WiFi or Ethernet (note the IP address).`
			- You can now send a UDP message and check it is repeated, for example using netcat `nc -u IP PORT`.
asio: initial idf port of asio library without ssl 2018-05-29 09:25:24 +00:00
			`See the README.md file in the upper level 'examples' directory for more information about examples.`