* New configuration panel 'IO'
* Add power density zones.
* Query and Set Kiss hardware commands
* Support bcast rsid over kiss socket
* limit selectable modem options to 8 bit versions only (kiss i/o mode)
* Employs simple HDLC encapsulation frame for transmit/receive CRC data
verification.
* Uses histogram based threshold detection.
* Include manual squelch button for KISS op's.
* User configurable inhibit transmit on busy frequencies for nn seconds
* Impose transmit wait on valid frame reception
* Uses dual UDP ports for concurrent operation of programs using the
same IP address.
* Clears the transmit buffer when data is available for more then 10
mins and has not been transmitted.
* Provides ax25 decoding. Code hijacked from the FLDIGI packet modem co
- redirect character data display on the RX panel
* Add non standard KISS frame to handle ARQ data.
- interface can handle both ARQ data and HDLC ax25 frames on
the same port.
* Squelch related command and control functions to the KISS hardware
interface.
* User configuration item to disable CSMA from config panel and kiss
hardware frame.
* Additional KISS command to adjust KPSQL detection gain (for testing).
* Removed unused function in sockets.cxx not compatible with LINUX OS.
(from John, G8BPQ)
* New command 'BUSY:<T|F>'
* Custom bindUDP() for UDP support.
* Waterfall display gain adjusted based on sample rate changes.
* Expanded conditions that indicate BUSY:T on command request.
* Log loopback condition to event log.
* Restore KPQSL set level position on start up.
* Conditionally log of the KISS data path strings
* Added debug filter 'KISS control' to event log.
* KPSQL threshold button indicator remains ON during transmit inhibit.
indication of active 'Busy Channel'.
* Added DEBUG Logging command LOG_HEX(const char *buf, int len);
D:,... ReadFromHostSocket: ..BUSY:. C0 06 42 55 53 59 3A C0
* Added thread locks to waterfall.cxx:
- powerDensity()
- peakFreq(),
- powerDensityMaximum()
These are being accessed by more then one thread.
* Swapped hash.m4 swapped test case to std::tr1::hash from std::hash
- Updated pskrep.cxx to handle the change in hash.m4
* 8PSK2000 removed.
* Coordination merge with branch kiss21.
* Code clean up
* Updated Documentation. Remove unused png's.
* Request from Jim, W2XO: Add log.set_rst_in and log.set_rst_out xmlrpc
commands.
* Compiler warning pacification (global in scope).
* New XMLRPC commands to query and set active IO port.
* Documentation update for XMLRPC commands
* WSAStartup and WSACleanup one for one issue.
* Update Docs for 3.22 release. New png's added.
* Changed secondary time out to use real time vice
RsID symbols
- required when actual modem sample rate is greater
than RsID sample rate, such as 8PSK modem types
* removed source files for Cfft, the original fast fourier
transform used in fldigi. Cfft has been replaced by
g_fft, the fast fourier transform C++ template based on
public domain code by
John Green <green_jt@vsdec.npt.nuwc.navy.mil>
* removed source files for Cfft, the original fast fourier
transform used in fldigi. Cfft has been replaced by
g_fft, the fast fourier transform C++ template based on
public domain code by
John Green <green_jt@vsdec.npt.nuwc.navy.mil>
* Added LOG_DEBUG statement to indicate when an
rsid code is not assigned to a modem type.
* Added code to disallow
<!MODEM:SSB> and <!MODEM:ANALYSIS>
macro tags.
* Added code to clear macro queue when T/R returns
to receive using the T/R button.
* Added assigned(trx_mode m) method to class cRsId
- used for testing whether Tx loop should invoke
the cRsID::send(...) method
* Corrected position of dtmf->send() in tx loop
* Changes needed to improve double RsID detection
* Removed resample test and dependent code
* Reimplemented FFT bucket array
- removed array pointer arithmetic
- memory copy and initializers used to update
the bucket array
- modified search routine to insure that all elements
of FFT bucket array are tested.
* Deprecated use of hash tables for initial RsID search
- search sensitivity and hash table use were incompatible
* Added LOG_DEBUG statement to indicate when an
rsid code is not assigned to a modem type.
* Added code to disallow
<!MODEM:SSB> and <!MODEM:ANALYSIS>
macro tags.
* Added code to clear macro queue when T/R returns
to receive using the T/R button.
* Added assigned(trx_mode m) method to class cRsId
- used for testing whether Tx loop should invoke
the cRsID::send(...) method
* Corrected position of dtmf->send() in tx loop
* Changes needed to improve double RsID detection
* Removed resample test and dependent code
* Reimplemented FFT bucket array
- removed array pointer arithmetic
- memory copy and initializers used to update
the bucket array
- modified search routine to insure that all elements
of FFT bucket array are tested.
* Deprecated use of hash tables for initial RsID search
- search sensitivity and hash table use were incompatible
* Changed to specifed short/long MT63 mode selection
ie: MT63-500S / MT63-500L
MT63-1000S / MT63-1000L
MT63-2000S / MT63-2000S
* Interleave no longer a configuration item, but fixed
by mode selection
S - short, 32 bit
L - long, 64 bit
* Add function modem->rx_flush() to flush receiver buffer to the
receive window on RSID modem reset/change.
* Repetitive conditional statements removed by reordering code flow
rsid::apply(). This also fixes reported bug by garylinnrobinson
"RxID bug that affects Olivia, Contestia, MFSK, RTTY"
* Add widget and control to retain frequency lock during a modem
reset/change.
* Add widget and control to disable/enable frequency change during
a RSID request while allowing modem change.
* Add widget and control to disable/enable Contestia FEC Block reset
on modem change/reset.
* Moved data flush function above RSID message output
* Changed to specifed short/long MT63 mode selection
ie: MT63-500S / MT63-500L
MT63-1000S / MT63-1000L
MT63-2000S / MT63-2000S
* Interleave no longer a configuration item, but fixed
by mode selection
S - short, 32 bit
L - long, 64 bit
* Add function modem->rx_flush() to flush receiver buffer to the
receive window on RSID modem reset/change.
* Repetitive conditional statements removed by reordering code flow
rsid::apply(). This also fixes reported bug by garylinnrobinson
"RxID bug that affects Olivia, Contestia, MFSK, RTTY"
* Add widget and control to retain frequency lock during a modem
reset/change.
* Add widget and control to disable/enable frequency change during
a RSID request while allowing modem change.
* Add widget and control to disable/enable Contestia FEC Block reset
on modem change/reset.
* Moved data flush function above RSID message output
* This commit contributed to by:
- John Douyere <vk2eta@gmail.com>
- Dave Freese <w1hkj@w1hkj.com>
- John Phelps <kl4yfd@gmail.com>
- Andrej Lajovic <s57ln@hamradio.si>
* New high speed and multi carrier modems
- psk, pskr
- DominoEX
- Thor
* Added separate modem initialization for
Olivia tone / bandwidth pairs:
- 4/250, 8/250
- 4/500, 8/500, 16/500
- 8/1000, 16/1000, 32/1000
- 64/2000
* RSID changes
- Added secondary RsID code set
- RsID code 263 enables detection of the secondary
RsID code burst.
* MFSK UTF-8 tx
- corrected transmit of two-byte UTF-8 characters
* PSK-UTF-8 tx
- corrected transmit of two-byte UTF-8 characters
* Changed PSK multicarrier bandwidth markers to show full
extent of signal in the waterfall.
* THOR modem updates
- Added Thor high speed modes
25x4, 50, 50x2, 100 Baud, all < 1800 Hz bandwidth
- IFK+ Softdecode function for THOR
dynamically detects and suppresses CWI
Rx printing is disabled when "File IO only" is selected for
soundcard. Decoder uses puncture in this condition.
- THOR FEC confidence indicator
Uses the actual path-metrics from the Viterbi decoder.
Displays next to the S/N in the main dialog.
* This commit contributed to by:
- John Douyere <vk2eta@gmail.com>
- Dave Freese <w1hkj@w1hkj.com>
- John Phelps <kl4yfd@gmail.com>
- Andrej Lajovic <s57ln@hamradio.si>
* New high speed and multi carrier modems
- psk, pskr
- DominoEX
- Thor
* Added separate modem initialization for
Olivia tone / bandwidth pairs:
- 4/250, 8/250
- 4/500, 8/500, 16/500
- 8/1000, 16/1000, 32/1000
- 64/2000
* RSID changes
- Added secondary RsID code set
- RsID code 263 enables detection of the secondary
RsID code burst.
* MFSK UTF-8 tx
- corrected transmit of two-byte UTF-8 characters
* PSK-UTF-8 tx
- corrected transmit of two-byte UTF-8 characters
* Changed PSK multicarrier bandwidth markers to show full
extent of signal in the waterfall.
* THOR modem updates
- Added Thor high speed modes
25x4, 50, 50x2, 100 Baud, all < 1800 Hz bandwidth
- IFK+ Softdecode function for THOR
dynamically detects and suppresses CWI
Rx printing is disabled when "File IO only" is selected for
soundcard. Decoder uses puncture in this condition.
- THOR FEC confidence indicator
Uses the actual path-metrics from the Viterbi decoder.
Displays next to the S/N in the main dialog.
* Added pre-signal tone which allows triggering
carrier detect / amplifier enable. Used primarily
for VHF/UHF power bricks.
* Reduced pre and post RsID silence periods to 1 RsID
symbol length (~0.0988 sec).
* Added user setting in seconds to allow RSID to open squelch in
decoder.
* Changed default to Extended Characters for Olivia, Contestia
and MT63
* Change default to "Capture wrapped messages"
Merger of all work submitted by Remi which was based on
3.13BY. Merge accomplished by reducing mulitple commits
to a single and then cherry-picking that commit to the
master branch. No merge conflicts were experienced.
Modified fl_digi.cxx / wefax items to comply with post
3.13BY changes.
Added Contestia modem with Rx/Tx support of RSID. This mode is
not suitable for use with flarq, flwrap or flics. It is very
suitable for contesting or conversational QSOs.