* modified rtty and psk viewers to eliminate modem specific
code in the UI elements
* restricted psk multichannel viewer to modes
- PSK31, PSK63, PSK63F and PSK125
- QPSK31, QPSK63 and QPSK125
* removed global references to Class internal elements
- ::pskviewer
- ::rttyviewer
* New configuration panel 'IO'
* Add power density zones.
* Query and Set Kiss hardware commands
* Support bcast rsid over kiss socket
* limit selectable modem options to 8 bit versions only (kiss i/o mode)
* Employs simple HDLC encapsulation frame for transmit/receive CRC data
verification.
* Uses histogram based threshold detection.
* Include manual squelch button for KISS op's.
* User configurable inhibit transmit on busy frequencies for nn seconds
* Impose transmit wait on valid frame reception
* Uses dual UDP ports for concurrent operation of programs using the
same IP address.
* Clears the transmit buffer when data is available for more then 10
mins and has not been transmitted.
* Provides ax25 decoding. Code hijacked from the FLDIGI packet modem co
- redirect character data display on the RX panel
* Add non standard KISS frame to handle ARQ data.
- interface can handle both ARQ data and HDLC ax25 frames on
the same port.
* Squelch related command and control functions to the KISS hardware
interface.
* User configuration item to disable CSMA from config panel and kiss
hardware frame.
* Additional KISS command to adjust KPSQL detection gain (for testing).
* Removed unused function in sockets.cxx not compatible with LINUX OS.
(from John, G8BPQ)
* New command 'BUSY:<T|F>'
* Custom bindUDP() for UDP support.
* Waterfall display gain adjusted based on sample rate changes.
* Expanded conditions that indicate BUSY:T on command request.
* Log loopback condition to event log.
* Restore KPQSL set level position on start up.
* Conditionally log of the KISS data path strings
* Added debug filter 'KISS control' to event log.
* KPSQL threshold button indicator remains ON during transmit inhibit.
indication of active 'Busy Channel'.
* Added DEBUG Logging command LOG_HEX(const char *buf, int len);
D:,... ReadFromHostSocket: ..BUSY:. C0 06 42 55 53 59 3A C0
* Added thread locks to waterfall.cxx:
- powerDensity()
- peakFreq(),
- powerDensityMaximum()
These are being accessed by more then one thread.
* Swapped hash.m4 swapped test case to std::tr1::hash from std::hash
- Updated pskrep.cxx to handle the change in hash.m4
* 8PSK2000 removed.
* Coordination merge with branch kiss21.
* Code clean up
* Updated Documentation. Remove unused png's.
* Request from Jim, W2XO: Add log.set_rst_in and log.set_rst_out xmlrpc
commands.
* Compiler warning pacification (global in scope).
* New XMLRPC commands to query and set active IO port.
* Documentation update for XMLRPC commands
* WSAStartup and WSACleanup one for one issue.
* Update Docs for 3.22 release. New png's added.
* read timing factors for string transmission by external
program using new xmlrpc query
- main.get_tx_timing
respone - #samples: samplerate: transmit_time (secs)
* read char rate table using external xmlrpc query
- main.get_char_rates
table structure
char, ascii-rep', #samples, samplerate, transmit_time (secs)
* added hidden macro <CPS_TEST> which simulates transmission
of test string and measures the character per second rate
for the modem in use.
- <CPS_TEST> uses internal "Jabberwocky" string
- <CPS_FILE:[full pathname to file]> uses external text file
- <CPS_STRING:ascii text string...>
- produces report similar to:
CPS test
text: /home/dave/dev.git/all.git/pskr-tests/paris.txt
mode: PSK-500R
# chars: 2400
xmt time: 56.580000
data time: 52.480000
data samples: 419840
sample rate: 8000
chars/sec: 45.731707
~WPM: 457.317073
* Allow writing wav file during timing test
* High Speed WAV
- Add macros to enable writing WAV file in at maximum
character throughput.
- disables codec output
- use this for creating wav test files
* Suppress waterfall display for CPS and WAV tests
* Remove PSK printf debug statements
* Fix MFSK xmt 0x05 --> 0x04 during CPS testing
* read timing factors for string transmission by external
program using new xmlrpc query
- main.get_tx_timing
respone - #samples: samplerate: transmit_time (secs)
* read char rate table using external xmlrpc query
- main.get_char_rates
table structure
char, ascii-rep', #samples, samplerate, transmit_time (secs)
* added hidden macro <CPS_TEST> which simulates transmission
of test string and measures the character per second rate
for the modem in use.
- <CPS_TEST> uses internal "Jabberwocky" string
- <CPS_FILE:[full pathname to file]> uses external text file
- <CPS_STRING:ascii text string...>
- produces report similar to:
CPS test
text: /home/dave/dev.git/all.git/pskr-tests/paris.txt
mode: PSK-500R
# chars: 2400
xmt time: 56.580000
data time: 52.480000
data samples: 419840
sample rate: 8000
chars/sec: 45.731707
~WPM: 457.317073
* Allow writing wav file during timing test
* High Speed WAV
- Add macros to enable writing WAV file in at maximum
character throughput.
- disables codec output
- use this for creating wav test files
* Suppress waterfall display for CPS and WAV tests
* Remove PSK printf debug statements
* Fix MFSK xmt 0x05 --> 0x04 during CPS testing
Conflicts:
src/cw_rtty/rtty.cxx
src/dialogs/confdialog.cxx
src/dialogs/confdialog.fl
src/include/rtty.h
src/misc/configuration.cxx
src/throb/throb.cxx
Compiles clean, a few additional changes to take into account ssdv. Looking at the updated version of Modem->RTTY there is no way of increasing the filter sizes - to be investigated
* Changed fftfilt implementation to use g_fft class vice
Cfft class.
* Removed multi-channel decoding when not visible or configured
for decoding when not visible.
* Changed fftfilt implementation to use g_fft class vice
Cfft class.
* Removed multi-channel decoding when not visible or configured
for decoding when not visible.
* Changed method of generating Farnsworth code
* Added Farnsworth specifier to WPM macro tag;
<WPM:WW:FF> WW = WPM, FF = Farnsworth WPM
* This entry is a missing commit from the 3.21
branch.
* Synop decoding in RTTY mode in reception buffer, in red.
* Creation of KML file for Synop data.
* Creation of KML file for Navtex messages.
* User locator displayed in KML.
* Multiline Synop and Navtex messages displayed in Adif logs.
* Added flsynop program as stand alone Synop decoder.
* Fixed Navtex default stations filename and Italian stations.
* Fixed Navtex frequency error.
* Added KML tab in configuration menu.
* Added parameters files for Synop decoding.
* Fixed CoordinateT type for different deserialization.
* Less logging messages from subthreads, because they might crash.
* Added try/catch blocks in main program.
* Can reload previous KML files at startup.
* Named WMO code tables in Synop decoding.
* Synop data can be logged to Adif files.
* flsynop can load kml files from one dir and save them elsewhere.
* Added strreplace and strcapitalize.
* Added Levenshtein distance for future use.
* Added class QsoHelper to ease Adif logging.
* East longitude positive, West negative. Fixes Navtex detection.
* Chars '=' or ';' used as a Synop end-of-section marker.
* Added option command in KML tab executed on KML file save.
* Reverse mode now saved in configuration.
* Comments in DOxygen syntax.
* Kml snippet stored once only per placemark.
* Code more compatible with Eclipse parsing.
* Synop decoded text can be interleaved with 5-digits groups.
* KML balloons can be in simple tables, matrices or plain text.
* Adif messages are saved in the main thread.
* Starts external command only if KML file was saved.
* Maximum KML data retention time is ten years, default 0 is no limit.
* Do not reload KML files when changing KML parameters.
* User kml file does not grow at each fldigi start.
* Relative humidity always parsed with Celsius temperature.
* Empty KML files are created on startup if not there.
* Prepared porting processes functions to Mingw.
* Added script for FTP transfer of KML files.
* Added synop_tool
* Navtex now has reverse mode.
* Data files can be updated from the Internet.
* HTTP load without anymore because crash in Wine
* Synop decoding in RTTY mode in reception buffer, in red.
* Creation of KML file for Synop data.
* Creation of KML file for Navtex messages.
* User locator displayed in KML.
* Multiline Synop and Navtex messages displayed in Adif logs.
* Added flsynop program as stand alone Synop decoder.
* Fixed Navtex default stations filename and Italian stations.
* Fixed Navtex frequency error.
* Added KML tab in configuration menu.
* Added parameters files for Synop decoding.
* Fixed CoordinateT type for different deserialization.
* Less logging messages from subthreads, because they might crash.
* Added try/catch blocks in main program.
* Can reload previous KML files at startup.
* Named WMO code tables in Synop decoding.
* Synop data can be logged to Adif files.
* flsynop can load kml files from one dir and save them elsewhere.
* Added strreplace and strcapitalize.
* Added Levenshtein distance for future use.
* Added class QsoHelper to ease Adif logging.
* East longitude positive, West negative. Fixes Navtex detection.
* Chars '=' or ';' used as a Synop end-of-section marker.
* Added option command in KML tab executed on KML file save.
* Reverse mode now saved in configuration.
* Comments in DOxygen syntax.
* Kml snippet stored once only per placemark.
* Code more compatible with Eclipse parsing.
* Synop decoded text can be interleaved with 5-digits groups.
* KML balloons can be in simple tables, matrices or plain text.
* Adif messages are saved in the main thread.
* Starts external command only if KML file was saved.
* Maximum KML data retention time is ten years, default 0 is no limit.
* Do not reload KML files when changing KML parameters.
* User kml file does not grow at each fldigi start.
* Relative humidity always parsed with Celsius temperature.
* Empty KML files are created on startup if not there.
* Prepared porting processes functions to Mingw.
* Added script for FTP transfer of KML files.
* Added synop_tool
* Navtex now has reverse mode.
* Data files can be updated from the Internet.
* HTTP load without anymore because crash in Wine