kopia lustrzana https://github.com/craigerl/digipi
221 wiersze
7.8 KiB
INI
221 wiersze
7.8 KiB
INI
|
|
/* This begins a multi-line comment - UPDATED OCT 20, 2019
|
|
|
|
CONFIGURATION FILE FOR BPQ32: G8BPQ SWITCH SOFTWARE FOR KM6LYW
|
|
Port 1: AX/IP/UDP Internet Linking User - BBS / DTN Node Forwarding Port
|
|
Port 2: BPQ Telnet Server - High-Speed Internet Port
|
|
Port 3: KISS/TNC Port - Direwolf
|
|
BPQ Node Map: KM6LYW-1 KM6LYW.DDNS.NET UDP 10093 B
|
|
*/ This ends a multi-line comment
|
|
|
|
SIMPLE
|
|
PASSWORD=test11
|
|
LOCATOR=CM98mv
|
|
NODECALL=KM6LYW-1
|
|
NODEALIAS=COOL
|
|
IDMSG: ; UI broadcast text from NODECALL to fixed dest ID
|
|
Cool,CA Packet Radio: KM6LYW-1 node/bbs/chat, KM6LYW-10 winlink email
|
|
*** ; Denotes end of IDMSG text
|
|
BTEXT: ; UI broadcast text from BCALL to destination UNPROTO=
|
|
Cool Packet Radio: KM6LYW-1 node/bbs/chat, KM6LYW-10 winlink email
|
|
*** ; Denotes end of BTEXT text
|
|
INFOMSG: ; The INFO command text follows:
|
|
Welcome to the KM6LYW Packet Radio
|
|
COOLBB:KM6LYW-1 BBS (work in progress)
|
|
COOLCH:KM6LYW-5 BPQ Chat Server (work in progress)
|
|
COOLWL:KM6LYW-10 WinLink RMS Gateway (inconceivably, this works)
|
|
|
|
Thanks for visiting.
|
|
--Craig KM6LYW@gmail.com
|
|
|
|
*** ; Denotes end of INFOMSG text
|
|
CTEXT: ; The CTEXT text follows:
|
|
KM6LYW - Craiger's Domain, BPQ Packet Node in Cool, CA
|
|
COOL:KM6LYW-1} RMS BBS CONNECT BYE INFO NODES PORTS ROUTES USERS MHEARD
|
|
*** ; Denotes end of CTEXT text
|
|
|
|
FULL_CTEXT=0 ; 0=send CTEXT to L2 connects to NODEALIAS only
|
|
; 1=send CTEXT to all connectees
|
|
|
|
;----------------------------------------------- NETWORK SYSTEM PARAMETERS ----------------------------------------
|
|
NODESINTERVAL=25 ; Nodes broadcast interval in minutes
|
|
IDINTERVAL=15 ; 'IDMSG' UI broadcast interval in minutes, 0=OFF
|
|
BTINTERVAL=0 ; The BTEXT broadcast interval in minutes, 0=OFF
|
|
MAXLINKS=63 ; Max level 2 links
|
|
MAXNODES=200 ; Max nodes in nodes table
|
|
MAXROUTES=64 ; Max adjacent nodes
|
|
MAXCIRCUITS=128 ; Max L4 circuits
|
|
MINQUAL=85 ; Minimum quality to add to nodes table
|
|
|
|
|
|
;----------------- AX / IP/ UDP PORT -----WTF does this do?------------------------------
|
|
PORT
|
|
PORTNUM=1
|
|
ID=AX/IP/UDP
|
|
DRIVER=BPQAXIP ; Uses BPQAXIP.DLL
|
|
QUALITY=200 ; Quality factor applied to node broadcasts heard on
|
|
; this port, unless overridden by a locked route
|
|
; entry. Setting to 0 stops node broadcasts
|
|
MINQUAL=0 ; Entries in the nodes table with qualities greater or
|
|
; equal to MINQUAL will be sent on this port. A value
|
|
; of 0 sends everything.
|
|
MAXFRAME=7 ; Max outstanding frames (1 thru 7)
|
|
FRACK=7000 ; Level 2 timout in milliseconds
|
|
RESPTIME=1000 ; Level 2 delayed ack timer in milliseconds
|
|
RETRIES=10 ; Level 2 maximum retry value
|
|
UNPROTO=ID ; BTEXT broadcast addrs format: DEST[,digi1[,digi2]]
|
|
BCALL=KM6LYW-1 ; BTEXT call. unstated defaults to APPL1CALL
|
|
CONFIG
|
|
UDP 10093 ;Listens for UDP packets on this UDP port number
|
|
UDP 10092
|
|
MHEARD ON
|
|
; AUTOADDMAP
|
|
BROADCAST NODES
|
|
BROADCAST ID
|
|
|
|
ENDPORT
|
|
|
|
;---------------------- BPQ TELNET SERVER PORT --------------------------------------------
|
|
PORT
|
|
PORTNUM=2
|
|
ID=Telnet
|
|
DRIVER=Telnet
|
|
QUALITY=0
|
|
CONFIG
|
|
CMS=1
|
|
CMSCALL=KM6LYW
|
|
CMSPASS=7H7WWA
|
|
RELAYAPPL=BBS
|
|
LOGGING=1
|
|
DisconnectOnClose=1
|
|
TCPPORT=8010
|
|
FBBPORT=8011
|
|
HTTPPORT=8012
|
|
LOGINPROMPT=user:
|
|
PASSWORDPROMPT=password:
|
|
MAXSESSIONS=15
|
|
CTEXT=Welcome to KM6LYW's Packet Paradise\nEnter ? for list of commands\n\n
|
|
|
|
; USER=KM6LYW,52983771RAnderson,KM6LYW,"",sysop
|
|
USER=KM6LYW,test11,KM6LYW,"",sysop
|
|
USER=KM6LYW,test11,KM6LYW,"",KM6LYW
|
|
ENDPORT
|
|
|
|
|
|
;------------------ KISS / direwolf PORT -----------------------------------------------------
|
|
PORT
|
|
PORTNUM=3 ; Port number
|
|
ID=VHF Packet 1200-baud ; PORTS command text
|
|
TYPE=ASYNC ; RS232 connection
|
|
IPADDR=127.0.0.1 ; DIREWOLF
|
|
TCPPORT=8001 ; DIREWOLF
|
|
SPEED=19200
|
|
CHANNEL=A ; TNC channel
|
|
MAXFRAME=1 ; Max outstanding frames
|
|
FRACK=5000 ; Level 2 timeout (ms)
|
|
RESPTIME=40 ; Level 2 delayed ACK (ms)
|
|
RETRIES=10 ; Level 2 max retries
|
|
PACLEN=236 ; Max packet length (bytes)
|
|
TXDELAY=300 ; Transmit keyup delay (ms) -craiger had to increase this from 200
|
|
SLOTTIME=100 ; CMSA interval timer (ms)
|
|
TXTAIL=20 ; craiger increased this, tho probably not needed
|
|
PERSIST=63 ; Persistence (256/(# transmissions-1)
|
|
DIGIFLAG=1 ; Allow Digipeat on this port
|
|
|
|
;other settings to consider
|
|
;PORT
|
|
; ID=Kiss Port
|
|
; TYPE=ASYNC
|
|
; PROTOCOL=KISS
|
|
; FRACK=10000
|
|
; RESPTIME=3000
|
|
; RETRIES=10
|
|
; MAXFRAME=2
|
|
; PACLEN=200
|
|
; TXDELAY=500
|
|
; SLOTTIME=100
|
|
; PERSIST=64
|
|
; KISSOPTIONS=POLLED,CHECKSUM,ACKMODE,SLAVE,D700,PITNC,NOPARAMS,FLDIGI,TRACKER
|
|
|
|
ENDPORT
|
|
|
|
|
|
|
|
;------------------------- APRS CONFIG ---APRS Igate connect failed---------------------------
|
|
|
|
APRSDIGI
|
|
APRSCall KM6LYW-1
|
|
StatusMsg=KM6LYW-1 node/bbs, KM6LYW-10 Winlink 145.730
|
|
Symbol=B ; Icon to display for station. Default is House if omitted
|
|
Symset=/
|
|
|
|
APRSPATH 1=WIDE1-1,WIDE2-2
|
|
BeaconInterval=20 ; Send Beacon every 20 mins
|
|
|
|
; If you want to digi on same port, but not send to APRS-IS, Specify Digimap n=n
|
|
|
|
;Digimap 5=5,16, ; Packets from 5 to 16, but not APRS-IS
|
|
Digimap 3=3,IS ; Packets from 3 to 3 and APRS-IS
|
|
|
|
;TraceCalls=WIDE,TRACE ; Calls for CALLN-n Processing with Trace
|
|
TraceCalls=WIDE,IN ; Calls for CALLN-n Processing with Trace
|
|
FloodCalls=FQE ; Calls for CALLN-n Processing without Trace
|
|
DigiCalls=KM6LYW ; Calls for Normal (ie no SSID manipulation) Digi
|
|
|
|
; For a Local "Fillin" Digi, you could include WIDE1-1 and leave out TraceCalls and FloodCalls
|
|
|
|
ReplaceDigiCalls ; Replace DigiCalls with APRSCall. Omit if you want the call to be left as it is received.
|
|
|
|
MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received with n greater than
|
|
MaxFloodHops= ; this, the value will be replaced BEFORE it is decremented.
|
|
|
|
; GPSPort= ; if specified, lat/lon will be taken from a GPS
|
|
; GPSSpeed=9600
|
|
; GPSSetsLocator=1
|
|
|
|
;IGATE Params. If specified you will gate RF packets and your beacons to APRS-IS
|
|
|
|
; ISHost=noam.aprs2.net ; APRS-IS Host Name
|
|
ISHost=198.50.198.139 ; T2VAN
|
|
ISPort=14580 ; Normal port for a filtered feed
|
|
ISPasscode=22452 ; If you don`t already have a passcode I can issue you one.
|
|
|
|
; WXFileName=C:\WeatherLink\KM6LYW13\WXNOW.TXT
|
|
; WXComment=KM6LYW Weather Station
|
|
; WXPortList=1,IS ; comma separated list - include IS to send to APRS-IS
|
|
; WXInterval=3 ; minutes
|
|
|
|
LAT=3854.20N ; Must be in standard APRS Format
|
|
LON=12056.15W ; Must be in standard APRS Format
|
|
|
|
***
|
|
|
|
|
|
;---------------------------------------------------------- ROUTING INFORMATION ------------------------------------------------
|
|
ROUTES: ; Locked routes (31 maximum)
|
|
/* ; Begin comment block
|
|
CALLSIGN,QUALITY,PORT[,MAXFRAME,FRACK,PACLEN,INP3Enable]
|
|
MAXFRAME, Frack and PACLEN if stated override the port defaults.
|
|
INP3Enable = 1 enables, 0 or null disable. The INP3 (internode protocol)
|
|
implementation in BPQ32 is experimental. See additional details in bpqaxip.cfg.
|
|
Example of a route statement using INP3:
|
|
HISCAL-12,1,1,0,0,0,1
|
|
Locked routes tend to be overused and should not be set unless truly needed.
|
|
*/ ; End comment block
|
|
|
|
*** ; Denotes end of locked routes
|
|
|
|
;------------------------------------------------------------- APPLICATIONS -------------------------------------------------------
|
|
; Applications: APPLICATION n,CMD,New Command,Call,Alias, Quality
|
|
|
|
LINCHAT
|
|
LINMAIL
|
|
|
|
APPLICATION 1,RMS,C 2 CMS,KM6LYW-10,COOLWL,255
|
|
;APPLICATION 2,CHAT,,KM6LYW-5,COOLCHAT,255
|
|
APPLICATION 2,CHAT,,KM6LYW-5,COOLCHT,255
|
|
APPLICATION 3,BBS,,KM6LYW-1,COOLBBS,255
|
|
APPLICATION 32,RC,,KM6LYW-9,0
|
|
|
|
|