Please try to fill out this form completely the first time, as you cannot currently come back and make changes here later. If you need to make subsequent edits, see /home/pi/localize.sh for a list of files you can tweak manually. You can always reflash your SD card and start over if not sure.

Callsign		Base callsign, no sid/suffix
Winlink Password		Create Account
APRS Password		Generate
Grid Square		Find
Lattitude		Locate
Longitude		Locate
AX.25 Node Pass		any alpha-numeric string
Enable FLRig		Use FLRig for CAT control
Large Display		Check if using PC or large tablet

USB-connected radios only
Rig number		See rig list
Device file		ys991,ic7300=ttyUSB0   ic705=ttyACM0
Baud rate		ys991=38400, ic7300=19200, ic705=115200

'; } } else { echo '

'; echo 'This Digipi was already initialized.

To make changes, please edit the config files manually. Please read /home/pi/localize.sh as a guide.

Remove /var/cache/digipi/localized.txt if you know what you\'re doing and would like to see the submit button here again.'; echo '

'; } } ?>

Restarting device.
"; $IP = $_SERVER['SERVER_ADDR']; echo "DigiPi will be available at http://$IP/ in approximately one minute.
"; $output = shell_exec("sudo /sbin/shutdown -r 0"); echo $output; } } if (isset($_POST["submit"])) { if (strlen($_POST["call"]) > 0) { $call = addslashes($_POST["call"]); $output = shell_exec("sudo sed -i 's/NEWCALL=.*/NEWCALL=$call/gi' /home/pi/localize.sh "); } if (strlen($_POST["wlpass"]) > 0) { $wlpass = addslashes($_POST["wlpass"]); $output = shell_exec("sudo sed -i 's/NEWWLPASS=.*/NEWWLPASS=$wlpass/gi' /home/pi/localize.sh "); } if (strlen($_POST["aprspass"]) > 0) { $aprspass = addslashes($_POST["aprspass"]); $output = shell_exec("sudo sed -i 's/NEWAPRSPASS=.*/NEWAPRSPASS=$aprspass/gi' /home/pi/localize.sh "); } if (strlen($_POST["grid"]) > 0) { $grid = addslashes($_POST["grid"]); $output = shell_exec("sudo sed -i 's/NEWGRID=.*/NEWGRID=$grid/gi' /home/pi/localize.sh"); } if (strlen($_POST["lat"]) > 0) { $lat = addslashes($_POST["lat"]); $output = shell_exec("sudo sed -i 's/NEWLAT=.*/NEWLAT=$lat/gi' /home/pi/localize.sh "); } if (strlen($_POST["lon"]) > 0) { $lon = addslashes($_POST["lon"]); $output = shell_exec("sudo sed -i 's/NEWLON=.*/NEWLON=$lon/gi' /home/pi/localize.sh "); } if (strlen($_POST["nodepass"]) > 0) { $nodepass = addslashes($_POST["nodepass"]); $output = shell_exec("sudo sed -i 's/NEWNODEPASS=.*/NEWNODEPASS=$nodepass/gi' /home/pi/localize.sh "); } if (strlen($_POST["rignumber"]) > 0) { $rignumber = addslashes($_POST["rignumber"]); $output = shell_exec("sudo sed -i 's/NEWRIGNUMBER=.*/NEWRIGNUMBER=$rignumber/gi' /home/pi/localize.sh "); } if (strlen($_POST["devicefile"]) > 0) { $devicefile = addslashes($_POST["devicefile"]); $output = shell_exec("sudo sed -i 's/NEWDEVICEFILE=.*/NEWDEVICEFILE=$devicefile/gi' /home/pi/localize.sh "); } if (strlen($_POST["baudrate"]) > 0) { $baudrate = addslashes($_POST["baudrate"]); $output = shell_exec("sudo sed -i 's/NEWBAUDRATE=.*/NEWBAUDRATE=$baudrate/gi' /home/pi/localize.sh "); } if (isset($_POST["flrig"])) { $output = shell_exec("sudo sed -i 's/NEWFLRIG=.*/NEWFLRIG=1/gi' /home/pi/localize.sh "); } if (isset($_POST["bigvnc"])) { $output = shell_exec("sudo sed -i 's/NEWBIGVNC=.*/NEWBIGVNC=1/gi' /home/pi/localize.sh "); } echo 'Changes applied.

'; echo'

'; echo ' for changes to take effect.'; echo'

'; echo "
"; echo "
"; echo "
"; $output = shell_exec('head -17 /home/pi/localize.sh | tail -13 '); $output = shell_exec('sudo /home/pi/localize.sh'); } ?>