diff --git a/usr/local/bin/browse.sh b/usr/local/bin/browse.sh
new file mode 100755
index 0000000..0c3d61f
--- /dev/null
+++ b/usr/local/bin/browse.sh
@@ -0,0 +1,450 @@
+#!/bin/bash 
+Version="0.2.8"
+#
+# Configuration
+# 
+LynxBin="/usr/bin/lynx"  # sudo apt install lynx
+CurlBin="/usr/bin/curl"  # sudo apt install curl
+UserAgent="User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:58.0) Gecko/20100101 Firefox/58.0"
+WebLogFile="/tmp/browser.log" 
+
+# Link to your start page
+#PortalURL="http://192.168.1.42/~bpq/"
+PortalURL="http://127.0.0.1/webmenu.html"
+
+# It is recommended to set up a proxy server locally to handle the requests from this script
+# it adds a level of control over which content can and cannot be requested, squid proxy is
+# utilized for this, but if you do not want to use it, comment the 2 lines out below.
+# I have set up my squid proxy to use alternate DNS servers of OpenDNS FamilyShield.
+
+#myproxy="http://127.0.0.1:3128"
+#export http_proxy=$myproxy
+# 
+# Usage & Installation
+#
+# For simplicity, I use openbsd's inetd which is available for Debian/Raspbian with sudo apt install openbsd-inetd
+# 
+# Add the following line to /etc/inetd.conf
+# 
+# browse		stream	tcp	nowait	bpq		/full/path/to/your/packet-scriptlets/browse.sh client ax25
+# 
+# The word 'bpq' above refers to the userid that this process will run under.
+#
+# Add the following line to /etc/services and make a note of the port number you choose. Make sure the one you pick does
+# not exist and is within the range of ports available.
+#
+# browse		63004/tcp   # Browser
+# 
+# Enable inetd: sudo systemctl enable inetd
+#               sudo service inetd start
+#
+# In bpq32.cfg add the port specified above (63004) to the BPQ Telnet port list, CMDPORT= 
+#
+# Note the port's position offset in the list as that will be referenced in the APPLICATION line next.
+# The first port in the CMDPORT= line is position 0 (zero), the next would be 1, then 2 and so on.
+#
+# Locate your APPLICATION line definitions in bpq32.cfg and another one next in the sequence. Make
+# sure it has a unique <app number> between 1-32.
+#
+# Syntax: 
+# APPLICATION <app number 1-32>,<node command>,<node instruction>
+#
+# APPLICATION 25,WEB,C 10 HOST 1 S
+#
+# <node instruction> is where the command 'web' is told to use BPQ port 10 (the telnet port, yours may be different!)
+# HOST is a command to tell BPQ to look at the BPQ Telnet CMDPORT= list, and '1' is to pick offset position 1, that
+# in turn resolves to TCP port 63004. The 'S' tells the node to return the user back to the node when they exit
+# the web portal instead of disconnecting them, it refers to the word 'Stay'.
+
+# Further config is at the bottom of the file for customization of the menu options as well as welcome message.
+##### End of Config - Do not change anything below here.
+#
+# Global Vars
+LinkRegex='[-a-zA-Z0-9@:%._\+~#=]{1,256}\.[a-zA-Z0-9()]{1,7}\b([-a-zA-Z0-9()@:%_\+.~#?&//=]*)'
+QuitCommandRegex='^(0|q|Q)$'
+MenuCommandRegex='^(m|M)$' 
+ListCommandRegex='^(l|L)$'
+BackCommandRegex='^(B|b)$'
+NewCommandRegex='^(n|N)$'
+RedisplayCommandRegex='^(r|R)$'
+WarningLimit=30
+BackPage="none"
+Referrer="none"
+declare -A GlobalLinksArray # I'm an associative array!
+
+set -e
+trap 'catch $? $LINENO' EXIT
+catch() {
+	    if [ "$1" != "0" ]; then
+		        # error handling goes here
+				exit
+      fi
+ }
+
+
+
+
+function CheckURLSanity() {
+	local CheckURL=$1
+	local ContentType
+	local ContentTypeRegex
+
+	# Ignore case with ,, below
+	if ! [[ ${CheckURL,,} =~ $LinkRegex ]]
+	then 
+	    ReturnVal="Error: not a valid URL"
+	    return 1
+	fi
+
+	# Ignore case with ,, below
+	if [[ ${CheckURL,,} =~ ^(gopher:|mailto:|ftp:|file:).*$ ]]
+	then
+		ReturnVal="Error: only http or https."
+		return 1
+	fi
+
+	if $CurlBin -H "${UserAgent}" --output /dev/null --silent --head --fail "${CheckURL}"; then
+		ContentType=$($CurlBin -H "${UserAgent}" -s -L -I --head -XGET "${CheckURL}" --output /dev/null -w '%{content_type}\n')
+		#echo "Content: $ContentType"
+		ContentTypeRegex='^(text\/html|text\/plain).*$'
+		if  ! [[ $ContentType =~ $ContentTypeRegex ]] 
+		then
+			ReturnVal="Error: Not text."
+			return 1
+		fi
+		return 0
+ 	else
+		ReturnVal="Error: Page not found"
+		return 1
+	fi	
+
+}
+
+function Quit() {
+	echo "Exiting... Bye!"
+	exit
+}
+
+function Begin() {
+	local Address
+	local URL
+	local URLFix
+	local Text
+
+	Referrer="Begin"
+	echo "Web address: (Q)uit, (M)enu"
+	read Address
+
+	# Trim Input
+	URLFix=${Address//[$'\t\r\n']} && Address=${Address%%*( )}
+
+	if [[ $URLFix =~ $QuitCommandRegex ]]
+	then
+		Quit
+		exit
+	elif [[ $URLFix =~ $MenuCommandRegex ]]
+	then
+		MainMenu
+	elif [[ $URLFix =~ ^https?:\/\/ ]]
+	then
+		URL="${URLFix}"
+	else
+		URL="http://${URLFix}"
+	fi
+
+	#echo "Requesting ${URL}..."
+
+	# Update Last Page Global
+	BackPage="${URL}"
+
+	LogUser "${Address}"
+	GetPage "${URL}" "Begin" "${URL}"
+}
+
+function GetPage() {
+	local URL
+	local ReferrerFunc
+	local ReferrerURL
+	local Links
+
+	URL=$1
+	ReferrerFunc=$2
+	ReferrerURL=$3
+
+	# Generate Initial Page
+	echo "Bookmark URL: ${URL}"
+	echo "'N' to open again"
+	DownloadPage "${URL}" "${ReferrerFunc}" "${ReferrerURL}"
+	Text=$GlobalText # Global Conversion
+	Links=$GlobalLinks # Global Conversion
+
+	# Display The Page
+	LineCount=0
+	OldIFS=$IFS
+	PageSize=`echo -n $Text | wc -c`
+	IFS='\n'
+	for i in $Text
+	do
+		LineCount=$((LineCount+1))
+	done
+	IFS=$OldIFS
+
+	if [ $LineCount -gt $WarningLimit ]
+	then
+		echo "Request ${LineCount} lines (${PageSize} Bytes), continue? (Y/n)"
+			unset AskThem
+			local AskThem
+			read AskThem
+			AskThemClean=${AskThem//[$'\t\r\n']} && AskThem=${AskThem%%*( )}
+			if ! [[ $AskThemClean =~ ^(Y|y).*$ ]]
+			then
+				echo "Okay lets not do that then..."
+				Prompt "${URL}"
+			fi
+	fi
+
+	#echo -e "Displaying ${URL}"
+	echo -e "${Text}"
+	#echo -e "The previous page was: ${BackPage}"
+
+	BackPage=${ReferrerURL}
+	# Prompt Menu
+	Prompt "${URL}" 
+}
+
+function LogUser() {
+	local URL
+	local Date
+
+	URL=$1
+	Date=`date`
+
+	if ! [ -e ${WebLogFile} ]
+	then
+		touch ${WebLogFile}
+	fi
+	echo "${Date}: ${Callsign} requested ${URL}" >> ${WebLogFile}
+}
+
+function DownloadPage() {
+	local URL
+	local ReferrerFunc
+	local ReferrerURL
+	URL=$1
+	ReferrerFunc=$2
+	ReferrerURL=$3
+
+	# Sanity Check the URL
+	if ! CheckURLSanity "${URL}"
+	then 
+		echo $ReturnVal
+		unset ReturnVal
+		$ReferrerFunc "${ReferrerURL}"
+	fi
+
+        local Text
+	Text=`$LynxBin -useragent=SimplePktPortal_L_y_n_x -unique_urls -number_links -hiddenlinks=ignore -nolist -nomore -trim_input_fields -justify -dump  ${URL} | sed '/^$/d'`
+
+	local Links
+	Links=`${LynxBin} -useragent=SimplePktPortal_L_y_n_x -hiddenlinks=ignore -dump -unique_urls -listonly ${URL}`
+
+	# Compile list of results into an array.
+	local OldIFS
+	OldIFS=$IFS
+	IFS=$'\n'
+
+	# SOME Pages will return links that Lynx will skip over yet still increments the Lynx link number displayed...
+	# This logic sets the links into an array where the index of the array is identical to the link number Lynx displayed.
+	local IndexRegex
+	local HttpRegex
+	GlobalLinkList=""
+	for Results in ${Links}
+	do
+		IndexRegex='^((\ )+|)+([0-9]+)' # Bleugh
+		HttpRegex='(https?.*)' # Barf
+		[[ $Results =~ $IndexRegex ]] && IndexID=`echo ${BASH_REMATCH[0]} | xargs`  # Trim the whitepaces
+		[[ $Results =~ $HttpRegex ]] && HttpURL=${BASH_REMATCH[0]} # It's an URL baby.
+		HttpURL=`echo $HttpURL | sed -e 's/ /%20/g'` # Fix for URL item with spaces
+		if ! [ -z $IndexID ] # There's always one, grrr. Lynx returns a line "References" before the link list...
+		then
+			GlobalLinksArray[$IndexID]=$HttpURL
+			# Build the human readable list of links
+			GlobalLinkList+="$IndexID = $HttpURL\n"
+
+		fi
+	done
+	IFS=$OldIFS
+
+	# The Globals:
+	# GlobalLinksArray
+	# GlobalLinkList
+	GlobalText="${Text}"
+}
+
+function Prompt() {
+	local URL
+	local RestartURL
+
+	URL=$1
+	RestartURL=$1
+
+	# Prompt
+	local MyLinkID
+	echo "Enter Link ID: (Q)uit, (L)inks, (B)ack, (N)ew, (M)enu, (R)edisplay"
+	read MyLinkID
+
+	# Trim Input
+	local LinkIDFix
+	LinkIDFix=${MyLinkID//[$'\t\r\n']} && MyLinkID=${MyLinkID%%*( )}
+
+	# Handle Link Choice
+	local LinkIDRegex
+	LinkIDRegex='^([0-9])+$' 
+
+	if [[ $LinkIDFix =~ $QuitCommandRegex ]] 
+	then
+		Quit
+	elif [[ $LinkIDFix =~ $ListCommandRegex ]] 
+	then
+		LinkCount=${#GlobalLinksArray[*]}
+		if [ $LinkCount -gt $WarningLimit ]
+		then 
+			echo "Link list ${LinkCount} entries, continue? (Y/n)"
+			unset AskThem
+			local AskThem
+			read AskThem
+			AskThemClean=${AskThem//[$'\t\r\n']} && AskThem=${AskThem%%*( )}
+			if ! [[ $AskThemClean =~ ^(Y|y).*$ ]]
+			then
+				echo "Okay lets not do that then..."
+				Prompt "${URL}"
+			fi
+		fi
+		echo -e ${GlobalLinkList} # Display Links
+		Prompt "${URL}" # Prompt
+	elif [[ $LinkIDFix =~ $NewCommandRegex ]] 
+	then
+		unset GlobalLinkList
+		unset GlobalLinkArray
+		unset GlobalText
+		Begin
+	elif [[ $LinkIDFix =~ $RedisplayCommandRegex ]] 
+	then
+		echo -e "Redisplaying Page..."
+		echo -e "$GlobalText"
+		Prompt "${URL}"
+	elif [[ $LinkIDFix =~ $MenuCommandRegex ]] 
+	then
+		unset GlobalLinkList
+		unset GlobalLinkArray
+		unset GlobalText
+		MainMenu
+	elif [[ $LinkIDFix =~ $BackCommandRegex ]]
+	then
+		if [[ ${BackPage} == "none" ]]
+		then
+			echo "Error: We can't go there!"
+			Prompt "${URL}" # Again
+			exit
+		else
+			unset GlobalLinkList
+			unset GlobalLinkArray
+			unset GlobalText
+			GetPage "${BackPage}" "Prompt" "${URL}"
+		fi
+	elif  [[ $LinkIDFix =~ $LinkIDRegex ]] 
+	then
+		# So an actual link ID has been requested...
+		# LinkRegex is Global
+		local LinkURL 
+
+		LinkURL=${GlobalLinksArray[${LinkIDFix}]}
+		if ! [[ $LinkURL =~ $LinkRegex ]]
+		then 
+			echo "Error: Sorry, ${LinkURL} cannot be accessed via this portal."
+			Prompt "${URL}" # Again
+		fi
+		
+		# Update Back-Page Global
+		BackPage="${LinkURL}"
+
+		unset GlobalLinkList
+		unset GlobalLinkArray
+		unset GlobalText
+		LogUser "${LinkURL}"
+		GetPage "${LinkURL}" "Prompt" "${URL}"
+	else
+		echo "Error: Oops! Invalid Link Number."
+		Prompt "${URL}" # Again
+		exit
+	fi
+
+}
+
+function MainMenu() {
+	        local URL	
+		URL=$PortalURL
+		echo "Main menu url placeholder here."
+		echo ""
+		GetPage "${URL}" "MainMenu"
+}
+
+function WelcomeMsg() {
+	local Callsign
+	Callsign=$1
+	echo "Hello ${Callsign}, Shortwave Web by PE1RRR V${Version}"
+	echo "Please be responsible."
+	return 0
+}
+
+function CheckCallsign() {
+	local Call
+	local CallsignRegex
+
+	Call=$1
+	CallsignRegex="[a-zA-Z0-9]{1,3}[0123456789][a-zA-Z0-9]{0,3}[a-zA-Z]"
+
+	if [[ $Call =~ $CallsignRegex ]] 
+	then
+		return 0
+	else
+		return 1
+	fi
+}
+
+
+# Inetd Connectivity- BPQ Node Connect and Telnet IP connect are handled differently.
+Client=$1
+if [ -z $Client ] 
+then
+	echo "Misconfigured, please ensure this script is called with the 'client <ip/ax25>' argument from inetd"
+	exit
+	fi
+
+if [ ${Client} == "ip" ]
+then
+	# Connection from 2nd param of inetd after 'client' on 'ip' port so standard telnet user is prompted for a callsign.
+	echo "Please enter your callsign:"
+	read CallsignIn
+elif	[ ${Client} == "ax25" ]
+then
+	# Connection came from a linbpq client on 'ax25' port which by default sends callsign on connect.
+	read CallsignIn
+fi
+
+# Trim BPQ-Term added CRs and Newlines.
+Callsign=${CallsignIn//[$'\t\r\n']} && CallsignIn=${CallsignIn%%*( )}
+# Get rid of SSIDs
+CallsignNOSSID=`echo ${Callsign} | cut -d'-' -f1`
+
+
+# Check Validity of callsign
+if ! CheckCallsign "${CallsignNOSSID}"
+then
+	echo "Error: Invalid Callsign..."
+	Quit
+	exit
+fi
+
+WelcomeMsg "${CallsignNOSSID}"
+MainMenu
diff --git a/usr/local/bin/node_web.sh b/usr/local/bin/node_web.sh
new file mode 100755
index 0000000..00bc0f2
--- /dev/null
+++ b/usr/local/bin/node_web.sh
@@ -0,0 +1,518 @@
+#!/bin/bash 
+# Version 0.2.4 PE1RRR WEB Portal for Packet
+#
+# Configuration
+# 
+LynxBin="/usr/bin/lynx"  # sudo apt install lynx
+CurlBin="/usr/bin/curl"  # sudo apt install curl
+UserAgent="User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:58.0) Gecko/20100101 Firefox/58.0"
+WebLogFile="/tmp/bpq-browser.log" # sudo touch /var/log/bpq-browser; sudo chmod bpq:bpq /var/log/bpq-browser
+Version="0.2.4"
+
+# It is recommended to set up a proxy server locally to handle the requests from this script
+# it adds a level of control over which content can and cannot be requested, squid proxy is
+# utilized for this, but if you do not want to use it, comment the 2 lines out below.
+# I have set up my squid proxy to use alternate DNS servers of OpenDNS FamilyShield.
+
+#myproxy="http://127.0.0.1:3128"
+#export http_proxy=$myproxy
+# 
+# Usage & Installation
+#
+# For simplicity, I use openbsd's inetd which is available for Debian/Raspbian with sudo apt install openbsd-inetd
+# 
+# Add the following line to /etc/inetd.conf
+# 
+# browse		stream	tcp	nowait	bpq		/full/path/to/your/packet-scriptlets/browse.sh client ax25
+# 
+# The word 'bpq' above refers to the userid that this process will run under.
+#
+# Add the following line to /etc/services and make a note of the port number you choose. Make sure the one you pick does
+# not exist and is within the range of ports available.
+#
+# browse		63004/tcp   # Browser
+# 
+# Enable inetd: sudo systemctl enable inetd
+#               sudo service inetd start
+#
+# In bpq32.cfg add the port specified above (63004) to the BPQ Telnet port list, CMDPORT= 
+#
+# Note the port's position offset in the list as that will be referenced in the APPLICATION line next.
+# The first port in the CMDPORT= line is position 0 (zero), the next would be 1, then 2 and so on.
+#
+# Locate your APPLICATION line definitions in bpq32.cfg and another one next in the sequence. Make
+# sure it has a unique <app number> between 1-32.
+#
+# Syntax: 
+# APPLICATION <app number 1-32>,<node command>,<node instruction>
+#
+# APPLICATION 25,WEB,C 10 HOST 1 S
+#
+# <node instruction> is where the command 'web' is told to use BPQ port 10 (the telnet port, yours may be different!)
+# HOST is a command to tell BPQ to look at the BPQ Telnet CMDPORT= list, and '1' is to pick offset position 1, that
+# in turn resolves to TCP port 63004. The 'S' tells the node to return the user back to the node when they exit
+# the web portal instead of disconnecting them, it refers to the word 'Stay'.
+
+# Further config is at the bottom of the file for customization of the menu options as well as welcome message.
+##### End of Config - Do not change anything below here.
+#
+# Global Vars
+LinkRegex='[-a-zA-Z0-9@:%._\+~#=]{1,256}\.[a-zA-Z0-9()]{1,7}\b([-a-zA-Z0-9()@:%_\+.~#?&//=]*)'
+QuitCommandRegex='^(0|q|Q)$'
+MenuCommandRegex='^(m|M)$' 
+ListCommandRegex='^(l|L)$'
+BackCommandRegex='^(B|b)$'
+NewCommandRegex='^(n|N)$'
+RedisplayCommandRegex='^(r|R)$'
+WarningLimit=30
+BackPage="none"
+Referrer="none"
+declare -A GlobalLinksArray # I'm an associative array!
+
+set -e
+trap 'catch $? $LINENO' EXIT
+catch() {
+	    if [ "$1" != "0" ]; then
+		        # error handling goes here
+				exit
+      fi
+ }
+
+
+
+
+function CheckURLSanity() {
+	local CheckURL=$1
+	local ContentType
+	local ContentTypeRegex
+
+	# Ignore case with ,, below
+	if ! [[ ${CheckURL,,} =~ $LinkRegex ]]
+	then 
+	    ReturnVal="Error: Address provided is not a valid URL"
+	    return 1
+	fi
+
+	# Ignore case with ,, below
+	if [[ ${CheckURL,,} =~ ^(gopher:|mailto:|ftp:|file:).*$ ]]
+	then
+		ReturnVal="Error: That type of URL is not allowed. Supported: http or https."
+		return 1
+	fi
+
+	if $CurlBin -H "${UserAgent}" --output /dev/null --silent --head --fail "${CheckURL}"; then
+		ContentType=$($CurlBin -H "${UserAgent}" -s -L -I --head -XGET "${CheckURL}" --output /dev/null -w '%{content_type}\n')
+		echo "Content: $ContentType"
+		ContentTypeRegex='^(text\/html|text\/plain).*$'
+		if  ! [[ $ContentType =~ $ContentTypeRegex ]] 
+		then
+			ReturnVal="Error: Sorry, that content is not text!"
+			return 1
+		fi
+		return 0
+ 	else
+		ReturnVal="Error: Sorry, ${CheckURL} does not appear to exist."
+		return 1
+	fi	
+
+}
+
+function Quit() {
+	echo "Exiting... Bye!"
+	exit
+}
+
+function Begin() {
+	local Address
+	local URL
+	local URLFix
+	local Text
+
+	Referrer="Begin"
+	echo "Enter a web address (Q = quit, M = main menu):"
+	read Address
+
+	# Trim Input
+	URLFix=${Address//[$'\t\r\n']} && Address=${Address%%*( )}
+
+	if [[ $URLFix =~ $QuitCommandRegex ]]
+	then
+		Quit
+		exit
+	elif [[ $URLFix =~ $MenuCommandRegex ]]
+	then
+		MainMenu
+	elif [[ $URLFix =~ ^https?:\/\/ ]]
+	then
+		URL="${URLFix}"
+	else
+		URL="http://${URLFix}"
+	fi
+
+	echo "Requesting ${URL}..."
+
+	# Update Last Page Global
+	BackPage="${URL}"
+
+	LogUser "${Address}"
+	GetPage "${URL}" "Begin" "${URL}"
+}
+
+function GetPage() {
+	local URL
+	local ReferrerFunc
+	local ReferrerURL
+	local Links
+
+	URL=$1
+	ReferrerFunc=$2
+	ReferrerURL=$3
+
+	# Generate Initial Page
+	echo "One moment please..."
+	DownloadPage "${URL}" "${ReferrerFunc}" "${ReferrerURL}"
+	Text=$GlobalText # Global Conversion
+	Links=$GlobalLinks # Global Conversion
+
+	# Display The Page
+	LineCount=0
+	OldIFS=$IFS
+	IFS='\n'
+	for i in $Text
+	do
+		LineCount=$((LineCount+1))
+	done
+	IFS=$OldIFS
+
+	if [ $LineCount -gt $WarningLimit ]
+	then
+		echo "This page is ${LineCount} lines long, are you sure you want to continue? (Y/n)"
+			unset AskThem
+			local AskThem
+			read AskThem
+			AskThemClean=${AskThem//[$'\t\r\n']} && AskThem=${AskThem%%*( )}
+			if ! [[ $AskThemClean =~ ^(Y|y).*$ ]]
+			then
+				echo "Okay lets not do that then..."
+				Prompt "${URL}"
+			fi
+	fi
+
+	echo -e "Displaying ${URL}"
+	echo -e "${Text}"
+	echo -e "The previous page was: ${BackPage}"
+
+	# Prompt Menu
+	Prompt "${URL}" 
+}
+
+function LogUser() {
+	local URL
+	local Date
+
+	URL=$1
+	Date=`date`
+
+	if ! [ -e ${WebLogFile} ]
+	then
+		touch ${WebLogFile}
+	fi
+	echo "${Date}: ${Callsign} requested ${URL}" >> ${WebLogFile}
+}
+
+function DownloadPage() {
+	local URL
+	local ReferrerFunc
+	local ReferrerURL
+	URL=$1
+	ReferrerFunc=$2
+	ReferrerURL=$3
+
+	# Sanity Check the URL
+	if ! CheckURLSanity "${URL}"
+	then 
+		echo $ReturnVal
+		unset ReturnVal
+		$ReferrerFunc "${ReferrerURL}"
+	fi
+
+        local Text
+	Text=`$LynxBin -useragent=SimplePktPortal_L_y_n_x -unique_urls -number_links -hiddenlinks=ignore -nolist -nomore -trim_input_fields -trim_blank_lines -justify -dump  ${URL} | sed '/^$/d'`
+
+	local Links
+	Links=`${LynxBin} -useragent=SimplePktPortal_L_y_n_x -hiddenlinks=ignore -dump -unique_urls -listonly ${URL}`
+
+	# Compile list of results into an array.
+	local OldIFS
+	OldIFS=$IFS
+	IFS=$'\n'
+
+	# SOME Pages will return links that Lynx will skip over yet still increments the Lynx link number displayed...
+	# This logic sets the links into an array where the index of the array is identical to the link number Lynx displayed.
+	local IndexRegex
+	local HttpRegex
+	GlobalLinkList=""
+	for Results in ${Links}
+	do
+		IndexRegex='^((\ )+|)+([0-9]+)' # Bleugh
+		HttpRegex='(https?.*)' # Barf
+		[[ $Results =~ $IndexRegex ]] && IndexID=`echo ${BASH_REMATCH[0]} | xargs`  # Trim the whitepaces
+		[[ $Results =~ $HttpRegex ]] && HttpURL=${BASH_REMATCH[0]} # It's an URL baby.
+		if ! [ -z $IndexID ] # There's always one, grrr. Lynx returns a line "References" before the link list...
+		then
+			GlobalLinksArray[$IndexID]=$HttpURL
+			# Build the human readable list of links
+			GlobalLinkList+="$IndexID = $HttpURL\n"
+
+		fi
+	done
+	IFS=$OldIFS
+
+	# The Globals:
+	# GlobalLinksArray
+	# GlobalLinkList
+	GlobalText="${Text}"
+}
+
+function Prompt() {
+	local URL
+	local RestartURL
+
+	URL=$1
+	RestartURL=$1
+
+	# Prompt
+	local MyLinkID
+	echo "Enter Link Number: (Q = quit, L = list links, B = back, N = open new link, M = main menu, R = Redisplay Page)"
+	read MyLinkID
+
+	# Trim Input
+	local LinkIDFix
+	LinkIDFix=${MyLinkID//[$'\t\r\n']} && MyLinkID=${MyLinkID%%*( )}
+
+	# Handle Link Choice
+	local LinkIDRegex
+	LinkIDRegex='^([0-9])+$' 
+
+	if [[ $LinkIDFix =~ $QuitCommandRegex ]] 
+	then
+		Quit
+	elif [[ $LinkIDFix =~ $ListCommandRegex ]] 
+	then
+		LinkCount=${#GlobalLinksArray[*]}
+		if [ $LinkCount -gt $WarningLimit ]
+		then 
+			echo "The link list is ${LinkCount} lines long, are you sure you want to continue? (Y/n)"
+			unset AskThem
+			local AskThem
+			read AskThem
+			AskThemClean=${AskThem//[$'\t\r\n']} && AskThem=${AskThem%%*( )}
+			if ! [[ $AskThemClean =~ ^(Y|y).*$ ]]
+			then
+				echo "Okay lets not do that then..."
+				Prompt "${URL}"
+			fi
+		fi
+		echo -e ${GlobalLinkList} # Display Links
+		Prompt "${URL}" # Prompt
+	elif [[ $LinkIDFix =~ $NewCommandRegex ]] 
+	then
+		unset GlobalLinkList
+		unset GlobalLinkArray
+		unset GlobalText
+		Begin
+	elif [[ $LinkIDFix =~ $RedisplayCommandRegex ]] 
+	then
+		echo -e "Redisplaying Page..."
+		echo -e "$GlobalText"
+		Prompt "${URL}"
+	elif [[ $LinkIDFix =~ $MenuCommandRegex ]] 
+	then
+		unset GlobalLinkList
+		unset GlobalLinkArray
+		unset GlobalText
+		MainMenu
+	elif [[ $LinkIDFix =~ $BackCommandRegex ]]
+	then
+		if [[ ${BackPage} == "none" ]]
+		then
+			echo "Error: We can't go there!"
+			Prompt "${URL}" # Again
+			exit
+		else
+			unset GlobalLinkList
+			unset GlobalLinkArray
+			unset GlobalText
+			GetPage "${BackPage}" "Prompt" "${URL}"
+		fi
+	elif  [[ $LinkIDFix =~ $LinkIDRegex ]] 
+	then
+		# So an actual link ID has been requested...
+		# LinkRegex is Global
+		local LinkURL 
+
+		LinkURL=${GlobalLinksArray[${LinkIDFix}]}
+		if ! [[ $LinkURL =~ $LinkRegex ]]
+		then 
+			echo "Error: Sorry, ${LinkURL} cannot be accessed via this portal."
+			Prompt "${URL}" # Again
+		fi
+		
+		# Update Back-Page Global
+		BackPage="${LinkURL}"
+
+		unset GlobalLinkList
+		unset GlobalLinkArray
+		unset GlobalText
+		LogUser "${LinkURL}"
+		GetPage "${LinkURL}" "Prompt" "${URL}"
+	else
+		echo "Error: Oops! Invalid Link Number."
+		Prompt "${URL}" # Again
+		exit
+	fi
+
+}
+
+
+function MainMenu() {
+#	echo "This portal is a work in progress. Please report bugs to pe1rrr@pe1rrr.#nbw.nld.euro"
+	echo ""
+	echo "[1] Enter your own web address"
+	echo ""
+	echo "Bookmarks"
+	echo "[100] W6EK.org Sierra Foothills ARC"
+	echo "[200] craiger.org/bbs info about this node"
+	echo "[300] yubanet fire info"
+	echo ""
+
+	echo "Enter Choice: (Q = quit)"
+
+	local IDRegex
+	local Choice
+	local URL
+
+	read Choice
+
+	# Trim
+	Selection=${Choice//[$'\t\r\n']} && Choice=${Choice%%*( )}
+	IDRegex='^([0-9]|q|Q)+$'
+
+	if ! [[ $Selection =~ $IDRegex ]]
+	then 
+	    echo "Error: Sorry, that selection was not valid, please check and try again."
+	    MainMenu
+	    exit
+	fi
+
+	if [[ $Selection =~ $QuitCommandRegex ]]
+	then
+		Quit
+		exit
+	fi
+
+	if [ $Selection -eq 0 ] 
+	then
+		exit
+	elif [ $Selection -eq 1 ]
+	        then Begin
+		exit
+	elif [ $Selection -eq 100 ]
+	then
+		URL="http://w6ek.org/"
+		GetPage "${URL}" "MainMenu"
+	elif [ $Selection -eq 101 ]
+	then
+		URL="https://rsgb.org"
+		GetPage "${URL}" "MainMenu"
+	elif [ $Selection -eq 200 ]
+	then
+		URL="http://craiger.org/bbs.html"
+		GetPage "${URL}" "MainMenu"
+	elif [ $Selection -eq 300 ]
+	then
+		URL="https://yubanet.com/Fires/"
+		GetPage "${URL}" "MainMenu"
+	elif [ $Selection -eq 400 ]
+	then
+		URL="https://www.rijksoverheid.nl/onderwerpen/coronavirus-covid-19"
+		GetPage "${URL}" "MainMenu"
+	elif [ $Selection -eq 401 ]
+	then
+		URL="https://veron.nl"
+		GetPage "${URL}" "MainMenu"
+	elif [ $Selection -eq 402 ]
+	then
+		URL="https://www.VRZA.nl/wp"
+		GetPage "${URL}" "MainMenu"
+	elif [ $Selection -eq 403 ]
+	then
+		URL="https://dares.nl"
+		GetPage "${URL}" "MainMenu"
+	else
+		echo "Error: Sorry, you must make a selection from the menu!"
+		MainMenu
+	fi
+
+
+}
+
+function WelcomeMsg() {
+	local Callsign
+	Callsign=$1
+#	echo "Hello ${Callsign}, welcome to Simple Packet Web - by PE1RRR Version ${Version}"
+#	echo "All requests are logged, inappropriate sites are blocked by OpenDNS FamilyShield"
+	return 0
+}
+
+function CheckCallsign() {
+	local Call
+	local CallsignRegex
+
+	Call=$1
+	CallsignRegex="[a-zA-Z0-9]{1,3}[0123456789][a-zA-Z0-9]{0,3}[a-zA-Z]"
+
+	if [[ $Call =~ $CallsignRegex ]] 
+	then
+		return 0
+	else
+		return 1
+	fi
+}
+
+
+# Inetd Connectivity- BPQ Node Connect and Telnet IP connect are handled differently.
+Client=$1
+if [ -z $Client ] 
+then
+	echo "Misconfigured, please ensure this script is called with the 'client <ip/ax25>' argument from inetd"
+	exit
+	fi
+
+if [ ${Client} == "ip" ]
+then
+	# Connection from 2nd param of inetd after 'client' on 'ip' port so standard telnet user is prompted for a callsign.
+	echo "Please enter your callsign:"
+	read CallsignIn
+elif	[ ${Client} == "ax25" ]
+then
+	# Connection came from a linbpq client on 'ax25' port which by default sends callsign on connect.
+	read CallsignIn
+fi
+
+# Trim BPQ-Term added CRs and Newlines.
+Callsign=${CallsignIn//[$'\t\r\n']} && CallsignIn=${CallsignIn%%*( )}
+# Get rid of SSIDs
+CallsignNOSSID=`echo ${Callsign} | cut -d'-' -f1`
+
+
+# Check Validity of callsign
+if ! CheckCallsign "${CallsignNOSSID}"
+then
+	echo "Error: Invalid Callsign..."
+	Quit
+	exit
+fi
+
+WelcomeMsg "${CallsignNOSSID}"
+MainMenu