From 96327d442a85a143ae075add70ef8b486510a699 Mon Sep 17 00:00:00 2001 From: sh123 Date: Wed, 24 Aug 2022 10:32:45 +0300 Subject: [PATCH] Update README.md --- README.md | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index e0287a0..bb5ccb3 100644 --- a/README.md +++ b/README.md @@ -15,17 +15,19 @@ For more information visit project [Wiki](https://github.com/sh123/codec2_talkie # Short Description What you can do with this app: +- Send and receive voice over FreeDV modes +- Send and receive voice over KISS with Codec2 speech frames +- Send and receive voice encapsulated into APRS UI frames with Codec2 speech frames +- Send and receive APRS position reports over FSK 300 (HF, TX only), AFSK1200 (VHF), FreeDV OFDM (HF) +- Send and receive APRS messages +- Use application as APRS digirepeater +- Use application as APRS-IS RX/TX iGate - Use it with your KISS Bluetooth/BLE/USB/TCPIP hardware modem, such as LoRa/FSK/AFSK/etc, control its parameters by using "set hardware" KISS command - Use it with KISS software modem using TCPIP, such as Direwolf - Use it with your HF/VHF/UHF transceiver as a sound modem - Use your phone as a software sound modem by using external USB OTG audio adapter (voice + data) or built-in phone speaker and mic (only data) - Use your phone for FreeDV protocol voice communication together with HF transceiver, which supports USB OTG audio - Control your external transceiver PTT by using USB serial CAT (or VOX if CAT PTT is not supported) -- Send and receive APRS position reports over FSK 300 (HF, TX only), AFSK1200 (VHF), FreeDV OFDM (HF) -- Send and receive APRS messages -- Send and receive raw Codec2 speech frames over KISS or inside APRS/AX.25 UI frames -- Use application as APRS digirepeater -- Use application as APRS-IS RX/TX iGate # Requirements - Android 7.0 (API 24) or higher