Updated Troubleshooting (markdown)

Troubleshooting.md

@@ -1,27 +1,8 @@
-## How to get a log
-
-### Docker log
+## How to get a docker log
 
 If you're running changedetection.io from the docker, it's as simple as calling this command:  
 `docker logs changedetection.io &> logs.txt`
 
-
-##  Workaround for 'pyinit_main: can't initialize time' error on Raspberry Pi
-
-When using or installing changedetection.io at the Raspberry Pi device, you can experience these errors:
-- `docker-compose top` or `docker top changedetection.io` do return:   
-    ```
-    Error response from daemon: Container {CONTAINER_ID} is restarting, wait until the container is running    
-    ```
-- `docker logs changedetection.io &> logs.txt` produces logs with the following error:  
-    ```
-    pyinit_main: can't initialize time
-    ```
-
-As per https://github.com/linuxserver/docker-papermerge/issues/4, run these commands to workaround this problem:  
-`wget http://ftp.us.debian.org/debian/pool/main/libs/libseccomp/libseccomp2_2.5.1-1_armhf.deb`  
-`sudo dpkg -i libseccomp2_2.5.1-1_armhf.deb`
-
 ## No Notifications
 
 Make sure you're not sending too long messages, as some notification targets do have message length limitations.   (See https://github.com/dgtlmoon/changedetection.io/wiki/Notification-configuration-notes )
@@ -56,3 +37,28 @@ services:
       volumes:
         - changedetection-data:/datastore
 ```
+
+# Raspberry Pi specific
+
+## packages required when installing from PIP
+
+```
+apt-get install libxslt1 -y
+```
+
+##  Workaround for 'pyinit_main: can't initialize time' error on Raspberry Pi
+
+When using or installing changedetection.io at the Raspberry Pi device, you can experience these errors:
+- `docker-compose top` or `docker top changedetection.io` do return:   
+    ```
+    Error response from daemon: Container {CONTAINER_ID} is restarting, wait until the container is running    
+    ```
+- `docker logs changedetection.io &> logs.txt` produces logs with the following error:  
+    ```
+    pyinit_main: can't initialize time
+    ```
+
+As per https://github.com/linuxserver/docker-papermerge/issues/4, run these commands to workaround this problem:  
+`wget http://ftp.us.debian.org/debian/pool/main/libs/libseccomp/libseccomp2_2.5.1-1_armhf.deb`  
+`sudo dpkg -i libseccomp2_2.5.1-1_armhf.deb`
+