rodzic
f7bde62496
commit
7171f8cbef
|
@ -4,7 +4,7 @@
|
|||
|
||||
# Analog-to-Digital Converter (ADC) - Temperature Measurement Using AVR128DA48 Microcontroller
|
||||
|
||||
In this application, the ADC will be used to measure the temperature using the on-board specific sensor, and the results will be transmitted through UUniversal Synchronous and Asynchronous Receiver and Transmitter (USART). The software's example code diagram is presented in the figure below.
|
||||
In this application, the ADC will be used to measure the temperature using the on-board specific sensor, and the results will be transmitted through Universal Synchronous and Asynchronous Receiver and Transmitter (USART). The software's example code diagram is presented in the figure below.
|
||||
<br><img src="images/soft_diagram.png" width="200">
|
||||
|
||||
## Related Documentation
|
||||
|
@ -33,7 +33,7 @@ To program the Curiosity Nano board with this MPLAB X project, follow the steps
|
|||
|
||||
## Setup
|
||||
|
||||
The AVR128DA48 Curiosity Nano Development Board is used as the test platform. As an input of the ADC, the internal temperature sensor is used for measurements.
|
||||
As an input of the ADC, the internal temperature sensor is used for measurements.
|
||||
<br>The following pin configuration must be made for this project:
|
||||
|
||||
|Pin | Configuration |
|
||||
|
|
Ładowanie…
Reference in New Issue