mirror
/
adsb-receiver
kopia lustrzana https://github.com/jprochazka/adsb-receiver
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Updating OGN and HAB output redirects

pull/334/head
Romeo-Golf 2017-01-02 17:19:06 +00:00
rodzic 60afa01f9a
commit bcfd8f8fea
2 zmienionych plików z 61 dodań i 58 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

62
bash/decoders/hab-lora-gateway.sh
Wyświetl plik

@ -48,8 +48,6 @@ DECODER_SERVICE_SCRIPT_PATH="/etc/init.d/${DECODER_SERVICE_SCRIPT_NAME}"
DECODER_SERVICE_SCRIPT_CONFIG="/etc/${DECODER_SERVICE_SCRIPT_NAME}.conf"
DECODER_SERVICE_SCRIPT_URL="https://raw.githubusercontent.com/Romeo-Golf/lora-gateway/master/hab-lora-gateway"
DECODER_OUTPUT="> /dev/null 2>&1"
### INCLUDE EXTERNAL SCRIPTS
source ${RECEIVER_BASH_DIRECTORY}/variables.sh
@ -98,13 +96,16 @@ fi
echo -e "\e[95m Installing packages needed to fulfill dependencies for ${DECODER_NAME}...\e[97m"
echo -e ""
# Required by install script.
CheckPackage git
CheckPackage rtl-sdr
# Required for USB SDR devices.
CheckPackage librtlsdr-dev
CheckPackage libusb-1.0-0-dev
CheckPackage libncurses5-dev
CheckPackage libcurl4-openssl-dev
CheckPackage rtl-sdr
# Required by LoRa Gateway.
CheckPackage curl
CheckPackage libcurl4-openssl-dev
CheckPackage libncurses5-dev
CheckPackage wiringpi
echo -e "\e[95m Configuring this device to run the ${DECODER_NAME} binaries...\e[97m"
@ -113,7 +114,7 @@ echo -e ""
# Check if SPI is enabled, if not use raspi-config to enable it.
if [[ `sudo raspi-config nonint get_spi` -eq 1 ]] ; then
echo -en "\e[33m Enabling SPI interface used by LoRa radio module..."
sudo raspi-config nonint do_spi 0
ACTION=$(sudo raspi-config nonint do_spi 0)
CheckReturnCode
echo -e ""
fi
@ -122,7 +123,7 @@ fi
if [[ -f ${DECODER_SERVICE_SCRIPT_PATH} ]] ; then
echo -en "\e[33m Stopping the ${DECODER_NAME} service...\t\t\t\t\t\t"
sudo service ${DECODER_SERVICE_SCRIPT_NAME} stop
ACTION=$(sudo service ${DECODER_SERVICE_SCRIPT_NAME} stop)
CheckReturnCode
fi
@ -150,19 +151,19 @@ SSDV_DIRECTORY="${DECODER_BUILD_DIRECTORY}/${SSDV_GITHUB_PROJECT}"
if [[ -d ${SSDV_DIRECTORY} ]] ; then
echo -en "\e[33m Updating SSDV library from \"\e[37m${SSDV_GITHUB_URL_SHORT}\e[33m\"...\t\t\t\t"
cd ${SSDV_DIRECTORY}
git remote update ${DECODER_OUTPUT}
ACTION=$(git remote update)
if [[ `git status -uno | grep -c "is behind"` -gt 0 ]] ; then
make clean ${DECODER_OUTPUT}
git pull ${DECODER_OUTPUT}
make ${DECODER_OUTPUT}
sudo make install ${DECODER_OUTPUT}
ACTION=$(make clean)
ACTION=$(git pull)
ACTION=$(make)
ACTION=$(sudo make install)
fi
else
echo -en "\e[33m Building SSDV library from \"\e[37m${SSDV_GITHUB_URL_SHORT}\e[33m\"...\t\t\t\t"
git clone https://${SSDV_GITHUB_URL_SHORT} ${DECODER_BUILD_DIRECTORY} ${DECODER_OUTPUT}
ACTION=$(git clone https://${SSDV_GITHUB_URL_SHORT} ${DECODER_BUILD_DIRECTORY})
cd ${SSDV_DIRECTORY}
make ${DECODER_OUTPUT}
sudo make install ${DECODER_OUTPUT}
ACTION=$(make)
ACTION=$(sudo make install)
fi
CheckReturnCode
@ -174,17 +175,17 @@ DECODER_PROJECT_DIRECTORY="${DECODER_BUILD_DIRECTORY}/${DECODER_GITHUB_PROJECT}"
if [[ -d ${DECODER_PROJECT_DIRECTORY} ]] ; then
echo -en "\e[33m Updating ${DECODER_NAME} from \"\e[37m${DECODER_GITHUB_URL_SHORT}\e[33m\"...\t\t"
cd ${DECODER_PROJECT_DIRECTORY}
git remote update ${DECODER_OUTPUT}
ACTION=$(git remote update)
if [[ `git status -uno | grep -c "is behind"` -gt 0 ]] ; then
make clean ${DECODER_OUTPUT}
git pull ${DECODER_OUTPUT}
make ${DECODER_OUTPUT}
ACTION=$(make clean)
ACTION=$(git pull)
ACTION=$(make)
fi
else
echo -en "\e[33m Building ${DECODER_NAME} from \"\e[37m${DECODER_GITHUB_URL_SHORT}\e[33m\"...\t\t"
git clone https://${DECODER_GITHUB_URL_SHORT} ${DECODER_BUILD_DIRECTORY} ${DECODER_OUTPUT}
ACTION=$(git clone https://${DECODER_GITHUB_URL_SHORT} ${DECODER_BUILD_DIRECTORY})
cd ${DECODER_PROJECT_DIRECTORY}
make ${DECODER_OUTPUT}
ACTION=$(make)
fi
CheckReturnCode
@ -216,6 +217,9 @@ if [[ -z ${HAB_LONGITUDE} ]] ; then
fi
fi
# Altitude.
# Not required by this decoder.
# Set receiver callsign for this decoder.
# Format TBC, for now assume it should be between 3 and 9 alphanumeric charactors, with no punctuation.
if [[ -z ${HAB_RECEIVER_NAME} ]] ; then
@ -407,7 +411,7 @@ EOF
fi
# Update ownership of new config file.
chown pi:pi ${DECODER_PROJECT_DIRECTORY}/gateway.txt ${DECODER_OUTPUT}
ACTION=$(chown pi:pi ${DECODER_PROJECT_DIRECTORY}/gateway.txt)
CheckReturnCode
### INSTALL AS A SERVICE
@ -417,8 +421,8 @@ if [[ -f ${DECODER_SERVICE_SCRIPT_NAME} ]] ; then
# Check for local copy of service script.
if [[ `grep -c "conf=${DECODER_SERVICE_SCRIPT_CONFIG}" ${DECODER_SERVICE_SCRIPT_NAME}` -eq 1 ]] ; then
echo -en "\e[33m Installing service script at \"\e[37m${DECODER_SERVICE_SCRIPT_PATH}\e[33m\"...\t\t\t"
cp ${DECODER_SERVICE_SCRIPT_NAME} ${DECODER_SERVICE_SCRIPT_PATH}
sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH} ${DECODER_OUTPUT}
ACTION=$(cp ${DECODER_SERVICE_SCRIPT_NAME} ${DECODER_SERVICE_SCRIPT_PATH})
ACTION=$(sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH})
else
echo -en "\e[33m Invalid service script \"\e[37m${DECODER_SERVICE_SCRIPT_NAME}\e[33m\"...\t\t\t\t"
false
@ -427,8 +431,8 @@ elif [[ -n ${DECODER_SERVICE_SCRIPT_URL} ]] ; then
# Otherwise attempt to download service script.
if [[ `echo ${DECODER_SERVICE_SCRIPT_URL} | grep -c "^http"` -gt 0 ]] ; then
echo -en "\e[33m Downloading service script to \"\e[37m${DECODER_SERVICE_SCRIPT_PATH}\e[33m\"...\t\t\t"
sudo curl -s ${DECODER_SERVICE_SCRIPT_URL} -o ${DECODER_SERVICE_SCRIPT_PATH}
sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH} ${DECODER_OUTPUT}
ACTION=$(sudo curl -s ${DECODER_SERVICE_SCRIPT_URL} -o ${DECODER_SERVICE_SCRIPT_PATH})
ACTION=$(sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH})
else
echo -en "\e[33m Invalid service script url \"\e[37m${DECODER_SERVICE_SCRIPT_URL}\e[33m\"...\t\t\t\t"
false
@ -451,7 +455,7 @@ if [[ -n ${DECODER_SERVICE_SCRIPT_CONFIG} ]] ; then
#port user directory command args
50100 root ${DECODER_PROJECT_DIRECTORY} /usr/bin/env TERM="vt220" ./gateway
EOF
chown pi:pi ${DECODER_SERVICE_SCRIPT_CONFIG} ${DECODER_OUTPUT}
ACTION=$(chown pi:pi ${DECODER_SERVICE_SCRIPT_CONFIG})
else
false
fi
@ -459,12 +463,12 @@ CheckReturnCode
# Configure $DECODER as a service.
echo -en "\e[33m Configuring ${DECODER_NAME} as a service...\t\t\t\t\t\t"
sudo update-rc.d ${DECODER_SERVICE_SCRIPT_NAME} defaults ${DECODER_OUTPUT}
ACTION=$(sudo update-rc.d ${DECODER_SERVICE_SCRIPT_NAME} defaults)
CheckReturnCode
# Start the $DECODER service.
echo -en "\e[33m Starting the ${DECODER_NAME} service...\t\t\t\t\t\t"
sudo service ${DECODER_SERVICE_SCRIPT_NAME} start ${DECODER_OUTPUT}
ACTION=$(sudo service ${DECODER_SERVICE_SCRIPT_NAME} start)
CheckReturnCode
### ARCHIVE SETUP PACKAGES

57
bash/decoders/rtlsdr-ogn.sh
Wyświetl plik

@ -48,8 +48,6 @@ DECODER_SERVICE_SCRIPT_PATH="/etc/init.d/${DECODER_SERVICE_SCRIPT_NAME}"
DECODER_SERVICE_SCRIPT_CONFIG="/etc/${DECODER_SERVICE_SCRIPT_NAME}.conf"
DECODER_SERVICE_SCRIPT_URL="http://download.glidernet.org/common/service/rtlsdr-ogn"
DECODER_OUTPUT="> /dev/null 2>&1"
## INCLUDE EXTERNAL SCRIPTS
source ${RECEIVER_BASH_DIRECTORY}/variables.sh
@ -164,7 +162,7 @@ if [[ ${DUMP1090_IS_INSTALLED} = "true" ]] || [[${DUMP978_IS_INSTALLED} = "true"
ChangeConfig "DEVICE" ${DUMP1090_USB_DEVICE} "/etc/default/dump1090-mutability"
echo -e "\e[94m Reloading dump1090-mutability...\e[97m"
echo -e ""
sudo /etc/init.d/dump1090-mutability force-reload
ACTION=$(sudo /etc/init.d/dump1090-mutability force-reload)
echo -e ""
fi
# Assign the specified RTL-SDR dongle to dump978
@ -218,12 +216,12 @@ if [[ ${TUNER_COUNT} -gt 1 ]] ; then
elif [[ ${TUNER_COUNT} -eq 1 ]] ; then
echo -en "\e[33m Single RTL-SDR device \"0\" detected and assigned to ${DECODER_NAME}...\e[97m\t"
OGN_DEVICE_ID="0"
sudo /etc/init.d/dump1090-mutability stop ${DECODER_OUTPUT}
ACTION=$(sudo /etc/init.d/dump1090-mutability stop)
# No tuners present so assign device 0 and stop any other running decoders, or at least dump1090-mutablity for a default install.
elif [[ ${TUNER_COUNT} -lt 1 ]] ; then
echo -en "\e[33m No RTL-SDR device detected so ${DECODER_NAME} will be assigned device \"0\"...\e[97m\t"
OGN_DEVICE_ID="0"
sudo /etc/init.d/dump1090-mutability stop ${DECODER_OUTPUT}
ACTION=$(sudo /etc/init.d/dump1090-mutability stop)
fi
CheckReturnCode
@ -232,6 +230,7 @@ CheckReturnCode
echo -e "\e[95m Installing packages needed to fulfill dependencies for ${DECODER_NAME}...\e[97m"
echo -e ""
# Required by install script.
CheckPackage git
# Required for USB SDR devices.
CheckPackage librtlsdr-dev
@ -279,7 +278,7 @@ fi
if [[ -f ${DECODER_SERVICE_SCRIPT_PATH} ]] ; then
echo -en "\e[33m Stopping the ${DECODER_NAME} service...\t\t\t\t\t"
sudo service ${DECODER_SERVICE_SCRIPT_NAME} stop ${DECODER_OUTPUT}
ACTION=$(sudo service ${DECODER_SERVICE_SCRIPT_NAME} stop)
CheckReturnCode
fi
@ -308,27 +307,27 @@ if [[ ! -x `which kal` ]] ; then
if [[ -d "${KALIBRATE_PROJECT_DIRECTORY}" ]] ; then
echo -en "\e[33m Updating ${KALIBRATE_GITHUB_PROJECT} from \"\e[37m${KALIBRATE_GITHUB_URL_SHORT}\e[33m\"...\t"
cd ${KALIBRATE_PROJECT_DIRECTORY}
git remote update ${DECODER_OUTPUT}
ACTION=$(git remote update)
if [[ `git status -uno | grep -c "is behind"` -gt 0 ]] ; then
sudo make clean ${DECODER_OUTPUT}
git pull ${DECODER_OUTPUT}
ACTION=$(sudo make clean)
ACTION=$(git pull)
DO_INSTALL_KALIBRATE="true"
fi
else
echo -en "\e[33m Building ${KALIBRATE_GITHUB_PROJECT} from \"\e[37m${KALIBRATE_GITHUB_URL_SHORT}\e[33m\"...\t"
git clone https://${KALIBRATE_GITHUB_URL_SHORT} ${DECODER_BUILD_DIRECTORY} ${DECODER_OUTPUT}
ACTION=$(git clone https://${KALIBRATE_GITHUB_URL_SHORT} ${DECODER_BUILD_DIRECTORY})
cd ${KALIBRATE_PROJECT_DIRECTORY}
DO_INSTALL_KALIBRATE="true"
fi
if [[ ${DO_INSTALL_KALIBRATE} = "true" ]] ; then
if [[ -f "bootstrap" ]] ; then
./bootstrap ${DECODER_OUTPUT}
ACTION=$(./bootstrap)
fi
if [[ -f "configure" ]] ; then
./configure ${DECODER_OUTPUT}
ACTION=$(./configure)
fi
make ${DECODER_OUTPUT}
sudo make install ${DECODER_OUTPUT}
ACTION=$(make)
ACTION=$(sudo make install)
fi
CheckReturnCode
cd ${DECODER_BUILD_DIRECTORY}
@ -367,11 +366,11 @@ if [[ `echo "${DECODER_BINARY_URL}" | grep -c "^http"` -gt 0 ]] ; then
# Download binaries.
echo -en "\e[33m Downloading ${DECODER_NAME} binaries for \"\e[37m${CPU_ARCHITECTURE}\e[33m\" architecture...\t\t"
DECODER_BINARY_FILE=`echo ${DECODER_BINARY_URL} | awk -F "/" '{print $NF}' `
curl -s ${DECODER_BINARY_URL} -o ${DECODER_BUILD_DIRECTORY}/${DECODER_BINARY_FILE} ${DECODER_OUTPUT}
ACTION=$(curl -s ${DECODER_BINARY_URL} -o ${DECODER_BUILD_DIRECTORY}/${DECODER_BINARY_FILE})
CheckReturnCode
# Extract binaries.
echo -en "\e[33m Extracting ${DECODER_NAME} package \"\e[37m${DECODER_BINARY_FILE}\e[33m\"...\t"
tar xzf ${DECODER_BUILD_DIRECTORY}/${DECODER_BINARY_FILE} -C ${DECODER_BUILD_DIRECTORY} ${DECODER_OUTPUT}
ACTION=$(tar xzf ${DECODER_BUILD_DIRECTORY}/${DECODER_BINARY_FILE} -C ${DECODER_BUILD_DIRECTORY})
CheckReturnCode
else
# Unable to download bimary due to invalid URL.
@ -391,7 +390,7 @@ fi
# Create named pipe if required.
if [[ ! -p ogn-rf.fifo ]] ; then
echo -en "\e[33m Creating named pipe...\t\t\t\t\t\t"
sudo mkfifo ogn-rf.fifo
ACTION=$(sudo mkfifo ogn-rf.fifo)
CheckReturnCode
fi
@ -401,8 +400,8 @@ DECODER_SETUID_BINARIES="gsm_scan ogn-rf rtlsdr-ogn"
DECODER_SETUID_COUNT="0"
for DECODER_SETUID_BINARY in ${DECODER_SETUID_BINARIES} ; do
DECODER_SETUID_COUNT=$((DECODER_SETUID_COUNT+1))
sudo chown root ${DECODER_SETUID_BINARY}
sudo chmod a+s ${DECODER_SETUID_BINARY}
ACTION=$(sudo chown root ${DECODER_SETUID_BINARY})
ACTION=$(sudo chmod a+s ${DECODER_SETUID_BINARY})
done
# And check that the file permissions have been applied.
if [[ `ls -l ${DECODER_SETUID_BINARIES} | grep -c "\-rwsr-sr-x"` -eq ${DECODER_SETUID_COUNT} ]] ; then
@ -422,11 +421,11 @@ if [[ ! -c gpu_dev ]] ; then
if [[ ${KERNEL_VERSION} < 4.1 ]] ; then
# Kernel is older than version 4.1.
echo -en "\e[33m Executing mknod for older kernels...\e[97m\t\t\t\t\t"
sudo mknod gpu_dev c 100 0
ACTION=$(sudo mknod gpu_dev c 100 0)
else
# Kernel is version 4.1 or newer.
echo -en "\e[33m Executing mknod for newer kernels...\e[97m\t\t\t\t\t"
sudo mknod gpu_dev c 249 0
ACTION=$(sudo mknod gpu_dev c 249 0)
fi
CheckReturnCode
fi
@ -593,7 +592,7 @@ EOF
fi
# Update ownership of new config file.
chown pi:pi ${DECODER_PROJECT_DIRECTORY}/${OGN_RECEIVER_NAME}.conf ${DECODER_OUTPUT}
ACTION=$(chown pi:pi ${DECODER_PROJECT_DIRECTORY}/${OGN_RECEIVER_NAME}.conf)
CheckReturnCode
### INSTALL AS A SERVICE
@ -603,7 +602,7 @@ if [[ -f ${DECODER_SERVICE_SCRIPT_NAME} ]] ; then
if [[ `grep -c "conf=${DECODER_SERVICE_SCRIPT_CONFIG}" ${DECODER_SERVICE_SCRIPT_NAME}` -eq 1 ]] ; then
echo -en "\e[33m Installing service script at \"\e[37m${DECODER_SERVICE_SCRIPT_PATH}\e[33m\"...\t\t"
cp ${DECODER_SERVICE_SCRIPT_NAME} ${DECODER_SERVICE_SCRIPT_PATH}
sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH} ${DECODER_OUTPUT}
ACTION=$(sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH})
else
echo -en "\e[33m Invalid service script \"\e[37m${DECODER_SERVICE_SCRIPT_NAME}\e[33m\"...\t\t\t"
false
@ -612,8 +611,8 @@ elif [[ -n ${DECODER_SERVICE_SCRIPT_URL} ]] ; then
# Otherwise attempt to download service script.
if [[ `echo ${DECODER_SERVICE_SCRIPT_URL} | grep -c "^http"` -gt 0 ]] ; then
echo -en "\e[33m Downloading service script to \"\e[37m${DECODER_SERVICE_SCRIPT_PATH}\e[33m\"...\t\t"
sudo curl -s ${DECODER_SERVICE_SCRIPT_URL} -o ${DECODER_SERVICE_SCRIPT_PATH}
sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH} ${DECODER_OUTPUT}
ACTION=$(sudo curl -s ${DECODER_SERVICE_SCRIPT_URL} -o ${DECODER_SERVICE_SCRIPT_PATH})
ACTION=$(sudo chmod +x ${DECODER_SERVICE_SCRIPT_PATH})
else
echo -en "\e[33m Invalid service script url \"\e[37m${DECODER_SERVICE_SCRIPT_URL}\e[33m\"...\t\t"
false
@ -637,7 +636,7 @@ if [[ -n ${DECODER_SERVICE_SCRIPT_CONFIG} ]] ; then
50000 pi ${DECODER_PROJECT_DIRECTORY} ./ogn-rf ${OGN_RECEIVER_NAME}.conf
50001 pi ${DECODER_PROJECT_DIRECTORY} ./ogn-decode ${OGN_RECEIVER_NAME}.conf
EOF
chown pi:pi ${DECODER_SERVICE_SCRIPT_CONFIG} ${DECODER_OUTPUT}
ACTION=$(chown pi:pi ${DECODER_SERVICE_SCRIPT_CONFIG})
else
false
fi
@ -650,7 +649,7 @@ if [[ ${TUNER_COUNT} -lt 2 ]] ; then
SERVICES="dump1090-mutability"
for SERVICE in ${SERVICES} ; do
if [[ `service ${SERVICE} status | grep -c "Active: active"` -gt 0 ]] ; then
sudo update-rc.d ${SERVICE} disable ${DECODER_OUTPUT}
ACTION=$(sudo update-rc.d ${SERVICE} disable)
fi
done
CheckReturnCode
@ -658,12 +657,12 @@ fi
# Configure $DECODER as a service.
echo -en "\e[33m Configuring ${DECODER_NAME} as a service...\t\t\t\t"
sudo update-rc.d ${DECODER_SERVICE_SCRIPT_NAME} defaults ${DECODER_OUTPUT}
ACTION=$(sudo update-rc.d ${DECODER_SERVICE_SCRIPT_NAME} defaults)
CheckReturnCode
# Start the $DECODER service.
echo -en "\e[33m Starting the ${DECODER_NAME} service...\t\t\t\t\t"
sudo service ${DECODER_SERVICE_SCRIPT_NAME} start ${DECODER_OUTPUT}
ACTION=$(sudo service ${DECODER_SERVICE_SCRIPT_NAME} start)
CheckReturnCode
## RTL-SDR OGN SETUP COMPLETE