5c07da9b8a | ||
---|---|---|
Altium | ||
FPGA | ||
FPGA_61.440 | ||
STM32 | ||
Stuff | ||
.gitattributes | ||
.gitignore | ||
README.md |
README.md
Wolf-LITE
DUC-DDC Трансивер Wolf-Lite Community telegram channel: https://t.me/TRX_Wolf
Principle of operation The RF signal is digitized by a high-speed ADC chip and fed to an FPGA processor. It performs DDC / DUC conversion (digital frequency shift down or up the spectrum) - by analogy with a direct conversion receiver. The I and Q quadrature signals from the conversions are fed to the STM32 microprocessor. It filters, (de) modulates and outputs audio to an audio codec / USB. It also handles the entire user interface. When transmitting, the process occurs in the opposite order, only at the end of the chain there is a DAC, which converts the digital signal back to analog RF.
Specifications Receiving frequencies: 0 MHz - 55 MHz Transmission frequencies: 0 MHz - 30 MHz TX power : 20W Modulation types (TX / RX): CW, LSB, USB, AM, FM, DIGI Preamplifier Adjustable attenuator 0-31dB Band pass filters ADC dynamic range (12 bit) ~74dB Supply voltage: 13.8V (overvoltage and polarity reversal NOT protection) Consumption current when receiving: 350-800mA (DC-DC or linear) Current consumption during transmission: ~5А Transceiver Features Panorama (spectrum + waterfall) up to 48 kHz wide Panorama tweaks and themes Adjustable bandwidth: HPF from 0Hz to 600Hz, LPF from 100Hz to 20kHz Integrated SWR/power meter (HF) Automatic and manual Notch filter Switchable AGC (AGC) with adjustable attack rate Range map, with the ability to automatically switch modes CAT virtual COM port (FT-450 emulation, RTS - PTT, DTR - CW) USB operation (audio transmission, CAT, KEY, PTT) SWR Graphs Spectrum analyzer Equalizer TX/RX, reverber AGC takes into account the characteristics of human hearing (K-Weighting) TCXO frequency stabilization (it is possible to use an external clock source, such as GPS) Tangent support Yaesu MH-36 и MH-48 And other.. (see menu) Sensitivity