diff --git a/Add-own-functionality.md b/Add-own-functionality.md
new file mode 100644
index 0000000..e9656c7
--- /dev/null
+++ b/Add-own-functionality.md
@@ -0,0 +1,25 @@
+This page is intended for those wishing to modify the WLED code to add their own functionality.
+
+### Basics
+Programming is done in the Arduino IDE. There is a special file, `wled06_usermod.ino`, to write your own code.
+(however, if you think your code may be relevant to many users, feel free to code it in directly and open a pull request)
+
+This file has three empty methods:
+- `userBeginPreConnection()` is called after loading settings but before connecting to WiFi.
+Use it to load custom settings or to specify own server pages with the `server.on()` method.
+- `userBegin()` is the main initialization. Use it to start own interfaces (IR, UDP ports, Websockets, GPIOs,...).
+- `userLoop()` is called by the main `loop()` function.
+
+### Modify WLED values
+If you know what you're doing, you may choose to change the value of any global variable declared in `wled00.ino`.
+However, for basic color and brightness changes, these are the most important:
+
+Variable Name | Type | Purpose
+--- | --- | ---
+bri | byte (0-255) | Master Brightness (0 is off, 255 is maximum)
+col[0] | byte (0-255) | Red color value
+col[1] | byte (0-255) | Green color value
+col[2] | byte (0-255) | Blue color value
+white | byte (0-255) | White color value
+
+After updating the color, you must call the `colorUpdated(int)` method. If you want to send a notification with the new color to other ESPs, use `colorUpdated(1)`, otherwise `colorUpdated(5)`.
\ No newline at end of file