mirror
/
WLED
kopia lustrzana https://github.com/Aircoookie/WLED
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

added SP501e BTNPIN

master
tonyn0 2020-07-20 20:08:58 -05:00
rodzic aa2fc8f1f8
commit 062c81ab2b
1 zmienionych plików z 1 dodań i 1 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
Compatible-hardware.md

@ -36,7 +36,7 @@ NodeMCU-32s | ESP32 | The most common ESP32 development board. Works well, depen
[Luminxa v2.2.2](https://luminxa.com/product/luminxa-2-2-2/) | ESP32 | ESP32 Based board with 12 WS2812 LEDs Onboard (6 on each side) + Gyro Sensor (Business project)
[Merkury MI-BW210-999W](https://www.walmart.com/ip/Merkury-Innovations-A21-Smart-Light-Bulb-75W-Color-LED-2-Pack/669037420) | ESP8285 | Tuya Style WiFi Led light bulb, Warm White + RGB. There are two versions of this same bulb sold in the same packaging only way to check is to look at the bulb, EBEQPW92 uses PWM led control and is compatible with WLED however EBEQPW06 uses an SM16716 chip and is not currently compatible with WLED. Managed to flash using tuya-convert and a custom WLED build with the following analog pinout: B:4, G:5, R:13, W:14. Extras disabled to allow OTA, OTA only way to flash this, programming headers are not internally available.
[Adafruit Feather Huzzah](https://learn.adafruit.com/adafruit-feather-huzzah-esp8266) | ESP8266 | General-purpose ESP8266 Board with USB, battery connector, etc.
[SP501e](https://www.amazon.com/RGBZONE-Controller-Compatible-Addressable-WS2812bB/dp/B07S3Z8GSH) | ESP8285 | 8285-based 1M Controller that supports both Addressable and PWM-based RGBWW LED strips . 5-24v DC input, 55mm x 26mm, sold under BTF lighting, RGBZone, etc. Vendors all list 'Fairynest' as the supporting mobile application. Board is silk screened with 'SP5XXe' but no other markings. RS232 pads are exposed on the back-side of the board with GND and GPIO0 right next to each other and thus Flash access fairly straight forward. GPIO 0 must be pulled to GND at boot and throughout the flashing process. I/O configuration: LEDPIN is 'GPIO03' for Addressable. PWM pin out for RGBWW (UNTESTED): CW: 14, WW: 12, B: 13, R: 02 and G: GPIO04. Flashed via PlatformIO, ESPHome and Tasmotizer. OTA updates untested. Pics of board here: https://github.com/Operation760/SP501e-RGB-LED-Controller-/blob/master/SP501e_top_bottom_traced.jpg
[SP501e](https://www.amazon.com/RGBZONE-Controller-Compatible-Addressable-WS2812bB/dp/B07S3Z8GSH) | ESP8285 | 8285-based 1M Controller that supports both Addressable and PWM-based RGBWW LED strips . 5-24v DC input, 55mm x 26mm, sold under BTF lighting, RGBZone, etc. Vendors all list 'Fairynest' as the supporting mobile application. Board is silk screened with 'SP5XXe' but no other markings. RS232 pads are exposed on the back-side of the board with GND and GPIO0 right next to each other and thus Flash access fairly straight forward. GPIO 0 must be pulled to GND at boot and throughout the flashing process. I/O configuration: LEDPIN is 'GPIO03' for Addressable, BTNPIN is GPIO 1. PWM pin out for RGBWW (UNTESTED): CW: 14, WW: 12, B: 13, R: 02 and G: GPIO04. Flashed via PlatformIO, ESPHome and Tasmotizer. OTA updates untested. Pics of board here: https://github.com/Operation760/SP501e-RGB-LED-Controller-/blob/master/SP501e_top_bottom_traced.jpg
## Useful boards and addons
Name | Description