WLED/wled00/network.cpp

#include "wled.h"
#include "fcn_declare.h"
#include "wled_ethernet.h"


#ifdef WLED_USE_ETHERNET
// The following six pins are neither configurable nor
// can they be re-assigned through IOMUX / GPIO matrix.
// See https://docs.espressif.com/projects/esp-idf/en/latest/esp32/hw-reference/esp32/get-started-ethernet-kit-v1.1.html#ip101gri-phy-interface
const managed_pin_type esp32_nonconfigurable_ethernet_pins[WLED_ETH_RSVD_PINS_COUNT] = {
    { 21, true  }, // RMII EMAC TX EN  == When high, clocks the data on TXD0 and TXD1 to transmitter
    { 19, true  }, // RMII EMAC TXD0   == First bit of transmitted data
    { 22, true  }, // RMII EMAC TXD1   == Second bit of transmitted data
    { 25, false }, // RMII EMAC RXD0   == First bit of received data
    { 26, false }, // RMII EMAC RXD1   == Second bit of received data
    { 27, true  }, // RMII EMAC CRS_DV == Carrier Sense and RX Data Valid
};

const ethernet_settings ethernetBoards[] = {
  // None
  {
  },

  // WT32-EHT01
  // Please note, from my testing only these pins work for LED outputs:
  //   IO2, IO4, IO12, IO14, IO15
  // These pins do not appear to work from my testing:
  //   IO35, IO36, IO39
  {
    1,                 // eth_address,
    16,                // eth_power,
    23,                // eth_mdc,
    18,                // eth_mdio,
    ETH_PHY_LAN8720,   // eth_type,
    ETH_CLOCK_GPIO0_IN // eth_clk_mode
  },

  // ESP32-POE
  {
     0,                  // eth_address,
    12,                  // eth_power,
    23,                  // eth_mdc,
    18,                  // eth_mdio,
    ETH_PHY_LAN8720,     // eth_type,
    ETH_CLOCK_GPIO17_OUT // eth_clk_mode
  },

   // WESP32
  {
    0,			              // eth_address,
    -1,			              // eth_power,
    16,			              // eth_mdc,
    17,			              // eth_mdio,
    ETH_PHY_LAN8720,      // eth_type,
    ETH_CLOCK_GPIO0_IN	  // eth_clk_mode
  },

  // QuinLed-ESP32-Ethernet
  {
    0,			              // eth_address,
    5,			              // eth_power,
    23,			              // eth_mdc,
    18,			              // eth_mdio,
    ETH_PHY_LAN8720,      // eth_type,
    ETH_CLOCK_GPIO17_OUT	// eth_clk_mode
  },

  // TwilightLord-ESP32 Ethernet Shield
  {
    0,			              // eth_address,
    5,			              // eth_power,
    23,			              // eth_mdc,
    18,			              // eth_mdio,
    ETH_PHY_LAN8720,      // eth_type,
    ETH_CLOCK_GPIO17_OUT	// eth_clk_mode
  },

  // ESP3DEUXQuattro
  {
    1,                    // eth_address,
    -1,                   // eth_power,
    23,                   // eth_mdc,
    18,                   // eth_mdio,
    ETH_PHY_LAN8720,      // eth_type,
    ETH_CLOCK_GPIO17_OUT  // eth_clk_mode
  },

  // ESP32-ETHERNET-KIT-VE
  {
    0,                    // eth_address,
    5,                   // eth_power,
    23,                   // eth_mdc,
    18,                   // eth_mdio,
    ETH_PHY_IP101,     // eth_type,
    ETH_CLOCK_GPIO0_IN  // eth_clk_mode
  },

  // QuinLed-Dig-Octa Brainboard-32-8L and LilyGO-T-ETH-POE
  {
    0,			              // eth_address,
    -1,			              // eth_power,
    23,			              // eth_mdc,
    18,			              // eth_mdio,
    ETH_PHY_LAN8720,      // eth_type,
    ETH_CLOCK_GPIO17_OUT	// eth_clk_mode
  },
};
#endif


//by https://github.com/tzapu/WiFiManager/blob/master/WiFiManager.cpp
int getSignalQuality(int rssi)
{
    int quality = 0;

    if (rssi <= -100)
    {
        quality = 0;
    }
    else if (rssi >= -50)
    {
        quality = 100;
    }
    else
    {
        quality = 2 * (rssi + 100);
    }
    return quality;
}


//handle Ethernet connection event
void WiFiEvent(WiFiEvent_t event)
{
  #ifdef WLED_USE_ETHERNET
  char hostname[25];
  #endif

  switch (event) {
#if defined(ARDUINO_ARCH_ESP32) && defined(WLED_USE_ETHERNET)
    case SYSTEM_EVENT_ETH_START:
      DEBUG_PRINTLN(F("ETH Started"));
      break;
    case SYSTEM_EVENT_ETH_CONNECTED:
      DEBUG_PRINTLN(F("ETH Connected"));
      if (!apActive) {
        WiFi.disconnect(true);
      }
      if (staticIP != (uint32_t)0x00000000 && staticGateway != (uint32_t)0x00000000) {
        ETH.config(staticIP, staticGateway, staticSubnet, IPAddress(8, 8, 8, 8));
      } else {
        ETH.config(INADDR_NONE, INADDR_NONE, INADDR_NONE);
      }
      // convert the "serverDescription" into a valid DNS hostname (alphanumeric)
      prepareHostname(hostname);
      ETH.setHostname(hostname);
      showWelcomePage = false;
      break;
    case SYSTEM_EVENT_ETH_DISCONNECTED:
      DEBUG_PRINTLN(F("ETH Disconnected"));
      // This doesn't really affect ethernet per se,
      // as it's only configured once.  Rather, it
      // may be necessary to reconnect the WiFi when
      // ethernet disconnects, as a way to provide
      // alternative access to the device.
      forceReconnect = true;
      break;
#endif
    default:
      break;
  }
}