WLED/usermods/sd_card

SD-card mod

Build

• modify platformio.ini and add to the build_flags of your configuration the following
• choose the way your SD is connected
  1. via -D WLED_USE_SD_MMC when connected via MMC
  2. via -D WLED_USE_SD_SPI when connected via SPI (use usermod page to setup SPI pins)

Test

• enable -D SD_PRINT_HOME_DIR and -D WLED_DEBUG
• this will print all files in / on boot via serial

Configuration

MMC

• The MMC port / pins needs no configuration as they are specified by Espressif

SPI

• The SPI port / pins can be modified via the WLED web-UI: Config → Usermod → SD Card

  option	effect	default
  pinSourceSelect	GPIO that is connected to SD's SS(source select) / CS(chip select)	16
  pinSourceClock	GPIO that is connected to SD's SCLK (source clock) / CLK(clock)	14
  pinPoci	GPIO that is connected to SD's POCI☨ (Peripheral-Out-Ctrl-In) / MISO (deprecated)	36
  pinPico	GPIO that is connected to SD's PICO☨ (Peripheral-In-Ctrl-Out) / MOSI (deprecated)	15
  sdEnable	Enable to read data from the SD-card	true

  ^☨_{Following new naming convention of OSHWA}

Usage in other mods

• creates a macro SD_ADAPTER which is either mapped to SD or SD_MMC (see SD_Test.ino how to use SD / SD_MMC functions)

• checks if the specified file is available on the SD card

  bool file_onSD(const char *filepath) {...}