kopia lustrzana https://github.com/Aircoookie/WLED
746a8badac
* Initial version of the PIR Staircase wipe up/down. * Add pulldown reminder * Workaround for missing D6 and D7 definitions on esp32dev * Add pinouts for d1 mini (esp8266 and esp32) and NodeMCU (and Arduino) * These IO pins on all these boards... NodeMCU and d1_mini esp32 supported. The others? Fingers crossed. * Changed to not collide with led strip pins * PIR on GPIO 15 and 16 on esp32 d1 mini * Removed PIN number ifdefs, it is impossible to match all boards * Settings in flash, info and API * Update README.md * Small doc changes * Improved README * Fixed error in reading configuration * Add API documentation * Documentation and code cleanup * Add enable/disable to API settings * Restore segment state when disabling plugin * Add debounce * Set segments in animation mode * Set segments in animation mode * Add support for HR04 sensors * Add preliminary description for using an HR04 sensor * Fixed typenumber and linked to datasheet * Moved config away from defines to prevent user error * Trigger Sensors through API * Rename scripts folder so that it's name doesn't clash with the `pio` command (prevents platformIO in VSCode to work properly on Mac) * Bugfix for detection problems * Separated config from code * Renamed Signal to Trigger pin * Filename adjusted * Clarifications and additions to README * Fixed references to pio scripts * Fixed API trigger bug * Adjustments to README.md * More efficient use of flash cycles, better naming * Bugfix: bottom sensor was not read properly * Renamed to Animated_Staircase * Add note on ultrasonic sensor and esp32 * Better naming of defines * Bugfix: Swipe down started with two steps. * Removed upload port in nodemcuv2 section Co-authored-by: Rolf <rolf@phobos.local> Co-authored-by: Rolf <> |
||
|---|---|---|
| .devcontainer | ||
| .github | ||
| .vscode | ||
| images | ||
| include | ||
| lib | ||
| pio-scripts | ||
| test | ||
| tools | ||
| usermods | ||
| wled00 | ||
| .gitignore | ||
| .gitpod.Dockerfile | ||
| .gitpod.yml | ||
| .travis.yml.old | ||
| CHANGELOG.md | ||
| CODE_OF_CONDUCT.md | ||
| LICENSE | ||
| package-lock.json | ||
| package.json | ||
| platformio.ini | ||
| platformio_override.ini.sample | ||
| readme.md | ||
| wled00.sln | ||
readme.md
Welcome to my project WLED! ✨
A fast and feature-rich implementation of an ESP8266/ESP32 webserver to control NeoPixel (WS2812B, WS2811, SK6812) LEDs or also SPI based chipsets like the WS2801 and APA102!
⚙️ Features
- WS2812FX library integrated for over 100 special effects
- FastLED noise effects and 50 palettes
- Modern UI with color, effect and segment controls
- Segments to set different effects and colors to parts of the LEDs
- Settings page - configuration over network
- Access Point and station mode - automatic failsafe AP
- Support for RGBW strips
- Up to 250 user presets to save and load colors/effects easily, supports cycling through them.
- Presets can be used to automatically execute API calls
- Nightlight function (gradually dims down)
- Full OTA software updatability (HTTP + ArduinoOTA), password protectable
- Configurable analog clock + support for the Cronixie kit by Diamex
- Configurable Auto Brightness limit for safer operation
- Filesystem-based config for easier backup of presets and settings
💡 Supported light control interfaces
- WLED app for Android and iOS
- JSON and HTTP request APIs
- MQTT
- Blynk IoT
- E1.31, Art-Net, DDP and TPM2.net
- Hyperion
- UDP realtime
- Alexa voice control (including dimming and color)
- Sync to Philips hue lights
- Adalight (PC ambilight via serial) and TPM2
- Sync color of multiple WLED devices (UDP notifier)
- Infrared remotes (24-key RGB, receiver required)
- Simple timers/schedules (time from NTP, timezones/DST supported)
📲 Quick start guide and documentation
See the wiki!
On this page you can find excellent tutorials made by the community and helpful tools to help you get your new lamp up and running!
🖼️ Images
💾 Compatible LED Strips
| Type | Voltage | Comments |
|---|---|---|
| WS2812B | 5v | |
| WS2813 | 5v | |
| SK6812 | 5v | RGBW |
| APA102 | 5v | C/D |
| WS2801 | 5v | C/D |
| LPD8806 | 5v | C/D |
| TM1814 | 12v | RGBW |
| WS2811 | 12v | 3-LED segments |
| WS2815 | 12v | |
| GS8208 | 12v | |
| Analog/non-addressable | any | Requires additional circuitry |
🧊 Compatible PC RGB Fans and ARGB accessories
| Brand | Model | Comments |
|---|---|---|
| Corsair | HD120 Fan | Uses WS2812B, data-in only |
| PCCOOLER | Moonlight 5-pack Fans | Uses WS2812B, includes Data-out connector to keep each fan uniquely addressable if wired in series like traditional LED strips |
| Any | 5v 3-pin ARGB for PC | Any PC RGB device that supports the 5v 3-pin ARGB motherboard header should work fine with WLED. All the major motherboard vendors support the Corsair HD120 and PCCOOLER fans listed, so we can safely assume any device that supports motherboard ARGB 5V 3-Pin standard will work with WLED. |
✌️ Other
Licensed under the MIT license
Credits here!
Uses Linearicons by Perxis!
Join the Discord server to discuss everything about WLED!
Check out the WLED Discourse forum!
You can also send me mails to dev.aircoookie@gmail.com, but please only do so if you want to talk to me privately.
If WLED really brightens up your every day, you can 
Disclaimer:
If you are sensitive to photosensitive epilepsy it is not recommended that you use this software.
In case you still want to try, don't use strobe, lighting or noise modes or high effect speed settings.
As per the MIT license, I assume no liability for any damage to you or any other person or equipment.