kopia lustrzana https://github.com/Aircoookie/WLED
916 wiersze
38 KiB
C++
916 wiersze
38 KiB
C++
#ifndef WLED_H
|
|
#define WLED_H
|
|
/*
|
|
Main sketch, global variable declarations
|
|
@title WLED project sketch
|
|
@version 0.15.0-b3
|
|
@author Christian Schwinne
|
|
*/
|
|
|
|
// version code in format yymmddb (b = daily build)
|
|
#define VERSION 2404120
|
|
|
|
//uncomment this if you have a "my_config.h" file you'd like to use
|
|
//#define WLED_USE_MY_CONFIG
|
|
|
|
// ESP8266-01 (blue) got too little storage space to work with WLED. 0.10.2 is the last release supporting this unit.
|
|
|
|
// ESP8266-01 (black) has 1MB flash and can thus fit the whole program, although OTA update is not possible. Use 1M(128K SPIFFS).
|
|
// 2-step OTA may still be possible: https://github.com/Aircoookie/WLED/issues/2040#issuecomment-981111096
|
|
// Uncomment some of the following lines to disable features:
|
|
// Alternatively, with platformio pass your chosen flags to your custom build target in platformio_override.ini
|
|
|
|
// You are required to disable over-the-air updates:
|
|
//#define WLED_DISABLE_OTA // saves 14kb
|
|
|
|
// You can choose some of these features to disable:
|
|
//#define WLED_DISABLE_ALEXA // saves 11kb
|
|
//#define WLED_DISABLE_HUESYNC // saves 4kb
|
|
//#define WLED_DISABLE_INFRARED // saves 12kb, there is no pin left for this on ESP8266-01
|
|
#ifndef WLED_DISABLE_MQTT
|
|
#define WLED_ENABLE_MQTT // saves 12kb
|
|
#endif
|
|
#ifndef WLED_DISABLE_ADALIGHT // can be used to disable reading commands from serial RX pin (see issue #3128).
|
|
#define WLED_ENABLE_ADALIGHT // disable saves 5Kb (uses GPIO3 (RX) for serial). Related serial protocols: Adalight/TPM2, Improv, Serial JSON, Continuous Serial Streaming
|
|
#else
|
|
#undef WLED_ENABLE_ADALIGHT // disable has priority over enable
|
|
#endif
|
|
//#define WLED_ENABLE_DMX // uses 3.5kb (use LEDPIN other than 2)
|
|
#define WLED_ENABLE_JSONLIVE // peek LED output via /json/live (WS binary peek is always enabled)
|
|
#ifndef WLED_DISABLE_LOXONE
|
|
#define WLED_ENABLE_LOXONE // uses 1.2kb
|
|
#endif
|
|
#ifndef WLED_DISABLE_WEBSOCKETS
|
|
#define WLED_ENABLE_WEBSOCKETS
|
|
#endif
|
|
|
|
//#define WLED_DISABLE_ESPNOW // Removes dependence on esp now
|
|
|
|
#define WLED_ENABLE_FS_EDITOR // enable /edit page for editing FS content. Will also be disabled with OTA lock
|
|
|
|
// to toggle usb serial debug (un)comment the following line
|
|
//#define WLED_DEBUG
|
|
|
|
// filesystem specific debugging
|
|
//#define WLED_DEBUG_FS
|
|
|
|
#ifndef WLED_WATCHDOG_TIMEOUT
|
|
// 3 seconds should be enough to detect a lockup
|
|
// define WLED_WATCHDOG_TIMEOUT=0 to disable watchdog, default
|
|
#define WLED_WATCHDOG_TIMEOUT 0
|
|
#endif
|
|
|
|
//optionally disable brownout detector on ESP32.
|
|
//This is generally a terrible idea, but improves boot success on boards with a 3.3v regulator + cap setup that can't provide 400mA peaks
|
|
//#define WLED_DISABLE_BROWNOUT_DET
|
|
|
|
// Library inclusions.
|
|
#include <Arduino.h>
|
|
#ifdef ESP8266
|
|
#include <ESP8266WiFi.h>
|
|
#include <ESP8266mDNS.h>
|
|
#include <ESPAsyncTCP.h>
|
|
#include <LittleFS.h>
|
|
extern "C"
|
|
{
|
|
#include <user_interface.h>
|
|
}
|
|
#ifndef WLED_DISABLE_ESPNOW
|
|
#include <espnow.h>
|
|
#define WIFI_MODE_STA WIFI_STA
|
|
#define WIFI_MODE_AP WIFI_AP
|
|
#include <QuickEspNow.h>
|
|
#endif
|
|
#else // ESP32
|
|
#include <HardwareSerial.h> // ensure we have the correct "Serial" on new MCUs (depends on ARDUINO_USB_MODE and ARDUINO_USB_CDC_ON_BOOT)
|
|
#include <WiFi.h>
|
|
#include <ETH.h>
|
|
#include "esp_wifi.h"
|
|
#include <ESPmDNS.h>
|
|
#include <AsyncTCP.h>
|
|
#if LOROL_LITTLEFS
|
|
#ifndef CONFIG_LITTLEFS_FOR_IDF_3_2
|
|
#define CONFIG_LITTLEFS_FOR_IDF_3_2
|
|
#endif
|
|
#include <LITTLEFS.h>
|
|
#else
|
|
#include <LittleFS.h>
|
|
#endif
|
|
#include "esp_task_wdt.h"
|
|
|
|
#ifndef WLED_DISABLE_ESPNOW
|
|
#include <esp_now.h>
|
|
#include <QuickEspNow.h>
|
|
#endif
|
|
#endif
|
|
#include <Wire.h>
|
|
#include <SPI.h>
|
|
|
|
#include "src/dependencies/network/Network.h"
|
|
|
|
#ifdef WLED_USE_MY_CONFIG
|
|
#include "my_config.h"
|
|
#endif
|
|
|
|
#include <ESPAsyncWebServer.h>
|
|
#ifdef WLED_ADD_EEPROM_SUPPORT
|
|
#include <EEPROM.h>
|
|
#endif
|
|
#include <WiFiUdp.h>
|
|
#include <DNSServer.h>
|
|
#ifndef WLED_DISABLE_OTA
|
|
#define NO_OTA_PORT
|
|
#include <ArduinoOTA.h>
|
|
#endif
|
|
#include <SPIFFSEditor.h>
|
|
#include "src/dependencies/time/TimeLib.h"
|
|
#include "src/dependencies/timezone/Timezone.h"
|
|
#include "src/dependencies/toki/Toki.h"
|
|
|
|
#ifndef WLED_DISABLE_ALEXA
|
|
#define ESPALEXA_ASYNC
|
|
#define ESPALEXA_NO_SUBPAGE
|
|
#define ESPALEXA_MAXDEVICES 10
|
|
// #define ESPALEXA_DEBUG
|
|
#include "src/dependencies/espalexa/Espalexa.h"
|
|
#include "src/dependencies/espalexa/EspalexaDevice.h"
|
|
#endif
|
|
|
|
#ifdef WLED_ENABLE_DMX
|
|
#if defined(ESP8266) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S2)
|
|
#include "src/dependencies/dmx/ESPDMX.h"
|
|
#else //ESP32
|
|
#include "src/dependencies/dmx/SparkFunDMX.h"
|
|
#endif
|
|
#endif
|
|
|
|
#include "src/dependencies/e131/ESPAsyncE131.h"
|
|
#ifdef WLED_ENABLE_MQTT
|
|
#include "src/dependencies/async-mqtt-client/AsyncMqttClient.h"
|
|
#endif
|
|
|
|
#define ARDUINOJSON_DECODE_UNICODE 0
|
|
#include "src/dependencies/json/AsyncJson-v6.h"
|
|
#include "src/dependencies/json/ArduinoJson-v6.h"
|
|
|
|
// ESP32-WROVER features SPI RAM (aka PSRAM) which can be allocated using ps_malloc()
|
|
// we can create custom PSRAMDynamicJsonDocument to use such feature (replacing DynamicJsonDocument)
|
|
// The following is a construct to enable code to compile without it.
|
|
// There is a code that will still not use PSRAM though:
|
|
// AsyncJsonResponse is a derived class that implements DynamicJsonDocument (AsyncJson-v6.h)
|
|
#if defined(ARDUINO_ARCH_ESP32)
|
|
extern bool psramSafe;
|
|
struct PSRAM_Allocator {
|
|
void* allocate(size_t size) {
|
|
if (psramSafe && psramFound()) return ps_malloc(size); // use PSRAM if it exists
|
|
else return malloc(size); // fallback
|
|
}
|
|
void* reallocate(void* ptr, size_t new_size) {
|
|
if (psramSafe && psramFound()) return ps_realloc(ptr, new_size); // use PSRAM if it exists
|
|
else return realloc(ptr, new_size); // fallback
|
|
}
|
|
void deallocate(void* pointer) {
|
|
free(pointer);
|
|
}
|
|
};
|
|
using PSRAMDynamicJsonDocument = BasicJsonDocument<PSRAM_Allocator>;
|
|
#else
|
|
#define PSRAMDynamicJsonDocument DynamicJsonDocument
|
|
#endif
|
|
|
|
#define FASTLED_INTERNAL //remove annoying pragma messages
|
|
#define USE_GET_MILLISECOND_TIMER
|
|
#include "FastLED.h"
|
|
#include "const.h"
|
|
#include "fcn_declare.h"
|
|
#include "NodeStruct.h"
|
|
#include "pin_manager.h"
|
|
#include "bus_manager.h"
|
|
#include "FX.h"
|
|
|
|
#ifndef CLIENT_SSID
|
|
#define CLIENT_SSID DEFAULT_CLIENT_SSID
|
|
#endif
|
|
|
|
#ifndef CLIENT_PASS
|
|
#define CLIENT_PASS ""
|
|
#endif
|
|
|
|
#ifndef MDNS_NAME
|
|
#define MDNS_NAME DEFAULT_MDNS_NAME
|
|
#endif
|
|
|
|
#if defined(WLED_AP_PASS) && !defined(WLED_AP_SSID)
|
|
#error WLED_AP_PASS is defined but WLED_AP_SSID is still the default. \
|
|
Please change WLED_AP_SSID to something unique.
|
|
#endif
|
|
|
|
#ifndef WLED_AP_SSID
|
|
#define WLED_AP_SSID DEFAULT_AP_SSID
|
|
#endif
|
|
|
|
#ifndef WLED_AP_PASS
|
|
#define WLED_AP_PASS DEFAULT_AP_PASS
|
|
#endif
|
|
|
|
#ifndef SPIFFS_EDITOR_AIRCOOOKIE
|
|
#error You are not using the Aircoookie fork of the ESPAsyncWebserver library.\
|
|
Using upstream puts your WiFi password at risk of being served by the filesystem.\
|
|
Comment out this error message to build regardless.
|
|
#endif
|
|
|
|
#ifndef WLED_DISABLE_INFRARED
|
|
#include <IRremoteESP8266.h>
|
|
#include <IRrecv.h>
|
|
#include <IRutils.h>
|
|
#endif
|
|
|
|
//Filesystem to use for preset and config files. SPIFFS or LittleFS on ESP8266, SPIFFS only on ESP32 (now using LITTLEFS port by lorol)
|
|
#ifdef ESP8266
|
|
#define WLED_FS LittleFS
|
|
#else
|
|
#if LOROL_LITTLEFS
|
|
#define WLED_FS LITTLEFS
|
|
#else
|
|
#define WLED_FS LittleFS
|
|
#endif
|
|
#endif
|
|
|
|
// GLOBAL VARIABLES
|
|
// both declared and defined in header (solution from http://www.keil.com/support/docs/1868.htm)
|
|
//
|
|
//e.g. byte test = 2 becomes WLED_GLOBAL byte test _INIT(2);
|
|
// int arr[]{0,1,2} becomes WLED_GLOBAL int arr[] _INIT_N(({0,1,2}));
|
|
|
|
#ifndef WLED_DEFINE_GLOBAL_VARS
|
|
#define WLED_GLOBAL extern
|
|
#define _INIT(x)
|
|
#define _INIT_N(x)
|
|
#define _INIT_PROGMEM(x)
|
|
#else
|
|
#define WLED_GLOBAL
|
|
#define _INIT(x) = x
|
|
//needed to ignore commas in array definitions
|
|
#define UNPACK( ... ) __VA_ARGS__
|
|
#define _INIT_N(x) UNPACK x
|
|
#define _INIT_PROGMEM(x) PROGMEM = x
|
|
#endif
|
|
|
|
#define STRINGIFY(X) #X
|
|
#define TOSTRING(X) STRINGIFY(X)
|
|
|
|
#ifndef WLED_VERSION
|
|
#define WLED_VERSION dev
|
|
#endif
|
|
#ifndef WLED_RELEASE_NAME
|
|
#define WLED_RELEASE_NAME dev_release
|
|
#endif
|
|
|
|
// Global Variable definitions
|
|
WLED_GLOBAL char versionString[] _INIT(TOSTRING(WLED_VERSION));
|
|
WLED_GLOBAL char releaseString[] _INIT_PROGMEM(TOSTRING(WLED_RELEASE_NAME)); // somehow this will not work if using "const char releaseString[]
|
|
#define WLED_CODENAME "Kōsen"
|
|
|
|
// AP and OTA default passwords (for maximum security change them!)
|
|
WLED_GLOBAL char apPass[65] _INIT(WLED_AP_PASS);
|
|
WLED_GLOBAL char otaPass[33] _INIT(DEFAULT_OTA_PASS);
|
|
|
|
// Hardware and pin config
|
|
#ifndef BTNPIN
|
|
#define BTNPIN 0,-1
|
|
#endif
|
|
#ifndef BTNTYPE
|
|
#define BTNTYPE BTN_TYPE_PUSH,BTN_TYPE_NONE
|
|
#endif
|
|
#ifndef RLYPIN
|
|
WLED_GLOBAL int8_t rlyPin _INIT(-1);
|
|
#else
|
|
WLED_GLOBAL int8_t rlyPin _INIT(RLYPIN);
|
|
#endif
|
|
//Relay mode (1 = active high, 0 = active low, flipped in cfg.json)
|
|
#ifndef RLYMDE
|
|
WLED_GLOBAL bool rlyMde _INIT(true);
|
|
#else
|
|
WLED_GLOBAL bool rlyMde _INIT(RLYMDE);
|
|
#endif
|
|
#ifndef IRPIN
|
|
#define IRPIN -1
|
|
#endif
|
|
#ifndef IRTYPE
|
|
#define IRTYPE 0
|
|
#endif
|
|
|
|
#if defined(CONFIG_IDF_TARGET_ESP32S3) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S2) || (defined(RX) && defined(TX))
|
|
// use RX/TX as set by the framework - these boards do _not_ have RX=3 and TX=1
|
|
constexpr uint8_t hardwareRX = RX;
|
|
constexpr uint8_t hardwareTX = TX;
|
|
#else
|
|
// use defaults for RX/TX
|
|
constexpr uint8_t hardwareRX = 3;
|
|
constexpr uint8_t hardwareTX = 1;
|
|
#endif
|
|
|
|
//WLED_GLOBAL byte presetToApply _INIT(0);
|
|
|
|
WLED_GLOBAL char ntpServerName[33] _INIT("0.wled.pool.ntp.org"); // NTP server to use
|
|
|
|
// WiFi CONFIG (all these can be changed via web UI, no need to set them here)
|
|
WLED_GLOBAL uint8_t selectedWiFi _INIT(0);
|
|
WLED_GLOBAL std::vector<WiFiConfig> multiWiFi;
|
|
WLED_GLOBAL IPAddress dnsAddress _INIT_N((( 8, 8, 8, 8))); // Google's DNS
|
|
WLED_GLOBAL char cmDNS[33] _INIT(MDNS_NAME); // mDNS address (*.local, replaced by wledXXXXXX if default is used)
|
|
WLED_GLOBAL char apSSID[33] _INIT(""); // AP off by default (unless setup)
|
|
WLED_GLOBAL byte apChannel _INIT(1); // 2.4GHz WiFi AP channel (1-13)
|
|
WLED_GLOBAL byte apHide _INIT(0); // hidden AP SSID
|
|
WLED_GLOBAL byte apBehavior _INIT(AP_BEHAVIOR_BOOT_NO_CONN); // access point opens when no connection after boot by default
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
WLED_GLOBAL bool noWifiSleep _INIT(true); // disabling modem sleep modes will increase heat output and power usage, but may help with connection issues
|
|
#else
|
|
WLED_GLOBAL bool noWifiSleep _INIT(false);
|
|
#endif
|
|
WLED_GLOBAL bool force802_3g _INIT(false);
|
|
#define WLED_WIFI_CONFIGURED (strlen(multiWiFi[0].clientSSID) >= 1 && strcmp(multiWiFi[0].clientSSID, DEFAULT_CLIENT_SSID) != 0)
|
|
|
|
#ifdef WLED_USE_ETHERNET
|
|
#ifdef WLED_ETH_DEFAULT // default ethernet board type if specified
|
|
WLED_GLOBAL int ethernetType _INIT(WLED_ETH_DEFAULT); // ethernet board type
|
|
#else
|
|
WLED_GLOBAL int ethernetType _INIT(WLED_ETH_NONE); // use none for ethernet board type if default not defined
|
|
#endif
|
|
#endif
|
|
|
|
// LED CONFIG
|
|
WLED_GLOBAL bool turnOnAtBoot _INIT(true); // turn on LEDs at power-up
|
|
WLED_GLOBAL byte bootPreset _INIT(0); // save preset to load after power-up
|
|
|
|
//if true, a segment per bus will be created on boot and LED settings save
|
|
//if false, only one segment spanning the total LEDs is created,
|
|
//but not on LED settings save if there is more than one segment currently
|
|
WLED_GLOBAL bool autoSegments _INIT(false);
|
|
#ifdef ESP8266
|
|
WLED_GLOBAL bool useGlobalLedBuffer _INIT(false); // double buffering disabled on ESP8266
|
|
#else
|
|
WLED_GLOBAL bool useGlobalLedBuffer _INIT(true); // double buffering enabled on ESP32
|
|
#endif
|
|
WLED_GLOBAL bool correctWB _INIT(false); // CCT color correction of RGB color
|
|
WLED_GLOBAL bool cctFromRgb _INIT(false); // CCT is calculated from RGB instead of using seg.cct
|
|
#ifdef WLED_USE_IC_CCT
|
|
WLED_GLOBAL bool cctICused _INIT(true); // CCT IC used (Athom 15W bulbs)
|
|
#else
|
|
WLED_GLOBAL bool cctICused _INIT(false); // CCT IC used (Athom 15W bulbs)
|
|
#endif
|
|
WLED_GLOBAL bool gammaCorrectCol _INIT(true); // use gamma correction on colors
|
|
WLED_GLOBAL bool gammaCorrectBri _INIT(false); // use gamma correction on brightness
|
|
WLED_GLOBAL float gammaCorrectVal _INIT(2.8f); // gamma correction value
|
|
|
|
WLED_GLOBAL byte col[] _INIT_N(({ 255, 160, 0, 0 })); // current RGB(W) primary color. col[] should be updated if you want to change the color.
|
|
WLED_GLOBAL byte colSec[] _INIT_N(({ 0, 0, 0, 0 })); // current RGB(W) secondary color
|
|
WLED_GLOBAL byte briS _INIT(128); // default brightness
|
|
|
|
WLED_GLOBAL byte nightlightTargetBri _INIT(0); // brightness after nightlight is over
|
|
WLED_GLOBAL byte nightlightDelayMins _INIT(60);
|
|
WLED_GLOBAL byte nightlightMode _INIT(NL_MODE_FADE); // See const.h for available modes. Was nightlightFade
|
|
|
|
WLED_GLOBAL byte briMultiplier _INIT(100); // % of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127)
|
|
|
|
// User Interface CONFIG
|
|
#ifndef SERVERNAME
|
|
WLED_GLOBAL char serverDescription[33] _INIT("WLED"); // Name of module - use default
|
|
#else
|
|
WLED_GLOBAL char serverDescription[33] _INIT(SERVERNAME); // use predefined name
|
|
#endif
|
|
WLED_GLOBAL bool simplifiedUI _INIT(false); // enable simplified UI
|
|
WLED_GLOBAL byte cacheInvalidate _INIT(0); // used to invalidate browser cache
|
|
|
|
// Sync CONFIG
|
|
WLED_GLOBAL NodesMap Nodes;
|
|
WLED_GLOBAL bool nodeListEnabled _INIT(true);
|
|
WLED_GLOBAL bool nodeBroadcastEnabled _INIT(true);
|
|
|
|
#ifndef WLED_DISABLE_INFRARED
|
|
WLED_GLOBAL int8_t irPin _INIT(IRPIN);
|
|
WLED_GLOBAL byte irEnabled _INIT(IRTYPE); // Infrared receiver
|
|
#endif
|
|
WLED_GLOBAL bool irApplyToAllSelected _INIT(true); //apply IR or ESP-NOW to all selected segments
|
|
|
|
WLED_GLOBAL uint16_t udpPort _INIT(21324); // WLED notifier default port
|
|
WLED_GLOBAL uint16_t udpPort2 _INIT(65506); // WLED notifier supplemental port
|
|
WLED_GLOBAL uint16_t udpRgbPort _INIT(19446); // Hyperion port
|
|
|
|
WLED_GLOBAL uint8_t syncGroups _INIT(0x01); // sync groups this instance syncs (bit mapped)
|
|
WLED_GLOBAL uint8_t receiveGroups _INIT(0x01); // sync receive groups this instance belongs to (bit mapped)
|
|
WLED_GLOBAL bool receiveNotificationBrightness _INIT(true); // apply brightness from incoming notifications
|
|
WLED_GLOBAL bool receiveNotificationColor _INIT(true); // apply color
|
|
WLED_GLOBAL bool receiveNotificationEffects _INIT(true); // apply effects setup
|
|
WLED_GLOBAL bool receiveSegmentOptions _INIT(false); // apply segment options
|
|
WLED_GLOBAL bool receiveSegmentBounds _INIT(false); // apply segment bounds (start, stop, offset)
|
|
WLED_GLOBAL bool notifyDirect _INIT(false); // send notification if change via UI or HTTP API
|
|
WLED_GLOBAL bool notifyButton _INIT(false); // send if updated by button or infrared remote
|
|
WLED_GLOBAL bool notifyAlexa _INIT(false); // send notification if updated via Alexa
|
|
WLED_GLOBAL bool notifyHue _INIT(true); // send notification if Hue light changes
|
|
WLED_GLOBAL uint8_t udpNumRetries _INIT(0); // Number of times a UDP sync message is retransmitted. Increase to increase reliability
|
|
|
|
WLED_GLOBAL bool alexaEnabled _INIT(false); // enable device discovery by Amazon Echo
|
|
WLED_GLOBAL char alexaInvocationName[33] _INIT("Light"); // speech control name of device. Choose something voice-to-text can understand
|
|
WLED_GLOBAL byte alexaNumPresets _INIT(0); // number of presets to expose to Alexa, starting from preset 1, up to 9
|
|
|
|
WLED_GLOBAL uint16_t realtimeTimeoutMs _INIT(2500); // ms timeout of realtime mode before returning to normal mode
|
|
WLED_GLOBAL int arlsOffset _INIT(0); // realtime LED offset
|
|
WLED_GLOBAL bool receiveDirect _INIT(true); // receive UDP/Hyperion realtime
|
|
WLED_GLOBAL bool arlsDisableGammaCorrection _INIT(true); // activate if gamma correction is handled by the source
|
|
WLED_GLOBAL bool arlsForceMaxBri _INIT(false); // enable to force max brightness if source has very dark colors that would be black
|
|
|
|
#ifdef WLED_ENABLE_DMX
|
|
#if defined(ESP8266) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S2)
|
|
WLED_GLOBAL DMXESPSerial dmx;
|
|
#else //ESP32
|
|
WLED_GLOBAL SparkFunDMX dmx;
|
|
#endif
|
|
WLED_GLOBAL uint16_t e131ProxyUniverse _INIT(0); // output this E1.31 (sACN) / ArtNet universe via MAX485 (0 = disabled)
|
|
// dmx CONFIG
|
|
WLED_GLOBAL byte DMXChannels _INIT(7); // number of channels per fixture
|
|
WLED_GLOBAL byte DMXFixtureMap[15] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }));
|
|
// assigns the different channels to different functions. See wled21_dmx.ino for more information.
|
|
WLED_GLOBAL uint16_t DMXGap _INIT(10); // gap between the fixtures. makes addressing easier because you don't have to memorize odd numbers when climbing up onto a rig.
|
|
WLED_GLOBAL uint16_t DMXStart _INIT(10); // start address of the first fixture
|
|
WLED_GLOBAL uint16_t DMXStartLED _INIT(0); // LED from which DMX fixtures start
|
|
#endif
|
|
WLED_GLOBAL uint16_t e131Universe _INIT(1); // settings for E1.31 (sACN) protocol (only DMX_MODE_MULTIPLE_* can span over consecutive universes)
|
|
WLED_GLOBAL uint16_t e131Port _INIT(5568); // DMX in port. E1.31 default is 5568, Art-Net is 6454
|
|
WLED_GLOBAL byte e131Priority _INIT(0); // E1.31 port priority (if != 0 priority handling is active)
|
|
WLED_GLOBAL E131Priority highPriority _INIT(3); // E1.31 highest priority tracking, init = timeout in seconds
|
|
WLED_GLOBAL byte DMXMode _INIT(DMX_MODE_MULTIPLE_RGB); // DMX mode (s.a.)
|
|
WLED_GLOBAL uint16_t DMXAddress _INIT(1); // DMX start address of fixture, a.k.a. first Channel [for E1.31 (sACN) protocol]
|
|
WLED_GLOBAL uint16_t DMXSegmentSpacing _INIT(0); // Number of void/unused channels between each segments DMX channels
|
|
WLED_GLOBAL byte e131LastSequenceNumber[E131_MAX_UNIVERSE_COUNT]; // to detect packet loss
|
|
WLED_GLOBAL bool e131Multicast _INIT(false); // multicast or unicast
|
|
WLED_GLOBAL bool e131SkipOutOfSequence _INIT(false); // freeze instead of flickering
|
|
WLED_GLOBAL uint16_t pollReplyCount _INIT(0); // count number of replies for ArtPoll node report
|
|
|
|
// mqtt
|
|
WLED_GLOBAL unsigned long lastMqttReconnectAttempt _INIT(0); // used for other periodic tasks too
|
|
#ifndef WLED_DISABLE_MQTT
|
|
#ifndef MQTT_MAX_TOPIC_LEN
|
|
#define MQTT_MAX_TOPIC_LEN 32
|
|
#endif
|
|
#ifndef MQTT_MAX_SERVER_LEN
|
|
#define MQTT_MAX_SERVER_LEN 32
|
|
#endif
|
|
WLED_GLOBAL AsyncMqttClient *mqtt _INIT(NULL);
|
|
WLED_GLOBAL bool mqttEnabled _INIT(false);
|
|
WLED_GLOBAL char mqttStatusTopic[40] _INIT(""); // this must be global because of async handlers
|
|
WLED_GLOBAL char mqttDeviceTopic[MQTT_MAX_TOPIC_LEN+1] _INIT(""); // main MQTT topic (individual per device, default is wled/mac)
|
|
WLED_GLOBAL char mqttGroupTopic[MQTT_MAX_TOPIC_LEN+1] _INIT("wled/all"); // second MQTT topic (for example to group devices)
|
|
WLED_GLOBAL char mqttServer[MQTT_MAX_SERVER_LEN+1] _INIT(""); // both domains and IPs should work (no SSL)
|
|
WLED_GLOBAL char mqttUser[41] _INIT(""); // optional: username for MQTT auth
|
|
WLED_GLOBAL char mqttPass[65] _INIT(""); // optional: password for MQTT auth
|
|
WLED_GLOBAL char mqttClientID[41] _INIT(""); // override the client ID
|
|
WLED_GLOBAL uint16_t mqttPort _INIT(1883);
|
|
WLED_GLOBAL bool retainMqttMsg _INIT(false); // retain brightness and color
|
|
#define WLED_MQTT_CONNECTED (mqtt != nullptr && mqtt->connected())
|
|
#else
|
|
#define WLED_MQTT_CONNECTED false
|
|
#endif
|
|
|
|
#ifndef WLED_DISABLE_HUESYNC
|
|
WLED_GLOBAL bool huePollingEnabled _INIT(false); // poll hue bridge for light state
|
|
WLED_GLOBAL uint16_t huePollIntervalMs _INIT(2500); // low values (< 1sec) may cause lag but offer quicker response
|
|
WLED_GLOBAL char hueApiKey[47] _INIT("api"); // key token will be obtained from bridge
|
|
WLED_GLOBAL byte huePollLightId _INIT(1); // ID of hue lamp to sync to. Find the ID in the hue app ("about" section)
|
|
WLED_GLOBAL IPAddress hueIP _INIT_N(((0, 0, 0, 0))); // IP address of the bridge
|
|
WLED_GLOBAL bool hueApplyOnOff _INIT(true);
|
|
WLED_GLOBAL bool hueApplyBri _INIT(true);
|
|
WLED_GLOBAL bool hueApplyColor _INIT(true);
|
|
#endif
|
|
|
|
WLED_GLOBAL uint16_t serialBaud _INIT(1152); // serial baud rate, multiply by 100
|
|
|
|
#ifndef WLED_DISABLE_ESPNOW
|
|
WLED_GLOBAL bool enableESPNow _INIT(false); // global on/off for ESP-NOW
|
|
WLED_GLOBAL byte statusESPNow _INIT(ESP_NOW_STATE_UNINIT); // state of ESP-NOW stack (0 uninitialised, 1 initialised, 2 error)
|
|
WLED_GLOBAL bool useESPNowSync _INIT(false); // use ESP-NOW wireless technology for sync
|
|
WLED_GLOBAL char linked_remote[13] _INIT(""); // MAC of ESP-NOW remote (Wiz Mote)
|
|
WLED_GLOBAL char last_signal_src[13] _INIT(""); // last seen ESP-NOW sender
|
|
#endif
|
|
|
|
// Time CONFIG
|
|
#ifndef WLED_NTP_ENABLED
|
|
#define WLED_NTP_ENABLED false
|
|
#endif
|
|
#ifndef WLED_TIMEZONE
|
|
#define WLED_TIMEZONE 0
|
|
#endif
|
|
#ifndef WLED_UTC_OFFSET
|
|
#define WLED_UTC_OFFSET 0
|
|
#endif
|
|
WLED_GLOBAL bool ntpEnabled _INIT(WLED_NTP_ENABLED); // get internet time. Only required if you use clock overlays or time-activated macros
|
|
WLED_GLOBAL bool useAMPM _INIT(false); // 12h/24h clock format
|
|
WLED_GLOBAL byte currentTimezone _INIT(WLED_TIMEZONE); // Timezone ID. Refer to timezones array in wled10_ntp.ino
|
|
WLED_GLOBAL int utcOffsetSecs _INIT(WLED_UTC_OFFSET); // Seconds to offset from UTC before timzone calculation
|
|
|
|
WLED_GLOBAL byte overlayCurrent _INIT(0); // 0: no overlay 1: analog clock 2: was single-digit clock 3: was cronixie
|
|
WLED_GLOBAL byte overlayMin _INIT(0), overlayMax _INIT(DEFAULT_LED_COUNT - 1); // boundaries of overlay mode
|
|
|
|
WLED_GLOBAL byte analogClock12pixel _INIT(0); // The pixel in your strip where "midnight" would be
|
|
WLED_GLOBAL bool analogClockSecondsTrail _INIT(false); // Display seconds as trail of LEDs instead of a single pixel
|
|
WLED_GLOBAL bool analogClock5MinuteMarks _INIT(false); // Light pixels at every 5-minute position
|
|
WLED_GLOBAL bool analogClockSolidBlack _INIT(false); // Show clock overlay only if all LEDs are solid black (effect is 0 and color is black)
|
|
|
|
WLED_GLOBAL bool countdownMode _INIT(false); // Clock will count down towards date
|
|
WLED_GLOBAL byte countdownYear _INIT(20), countdownMonth _INIT(1); // Countdown target date, year is last two digits
|
|
WLED_GLOBAL byte countdownDay _INIT(1) , countdownHour _INIT(0);
|
|
WLED_GLOBAL byte countdownMin _INIT(0) , countdownSec _INIT(0);
|
|
|
|
WLED_GLOBAL byte macroNl _INIT(0); // after nightlight delay over
|
|
WLED_GLOBAL byte macroCountdown _INIT(0);
|
|
WLED_GLOBAL byte macroAlexaOn _INIT(0), macroAlexaOff _INIT(0);
|
|
WLED_GLOBAL byte macroButton[WLED_MAX_BUTTONS] _INIT({0});
|
|
WLED_GLOBAL byte macroLongPress[WLED_MAX_BUTTONS] _INIT({0});
|
|
WLED_GLOBAL byte macroDoublePress[WLED_MAX_BUTTONS] _INIT({0});
|
|
|
|
// Security CONFIG
|
|
WLED_GLOBAL bool otaLock _INIT(false); // prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks
|
|
WLED_GLOBAL bool wifiLock _INIT(false); // prevents access to WiFi settings when OTA lock is enabled
|
|
WLED_GLOBAL bool aOtaEnabled _INIT(true); // ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on
|
|
WLED_GLOBAL char settingsPIN[5] _INIT(""); // PIN for settings pages
|
|
WLED_GLOBAL bool correctPIN _INIT(true);
|
|
WLED_GLOBAL unsigned long lastEditTime _INIT(0);
|
|
|
|
WLED_GLOBAL uint16_t userVar0 _INIT(0), userVar1 _INIT(0); //available for use in usermod
|
|
|
|
// internal global variable declarations
|
|
// wifi
|
|
WLED_GLOBAL bool apActive _INIT(false);
|
|
WLED_GLOBAL bool forceReconnect _INIT(false);
|
|
WLED_GLOBAL unsigned long lastReconnectAttempt _INIT(0);
|
|
WLED_GLOBAL bool interfacesInited _INIT(false);
|
|
WLED_GLOBAL bool wasConnected _INIT(false);
|
|
|
|
// color
|
|
WLED_GLOBAL byte lastRandomIndex _INIT(0); // used to save last random color so the new one is not the same
|
|
|
|
// transitions
|
|
WLED_GLOBAL bool fadeTransition _INIT(true); // enable crossfading brightness/color
|
|
WLED_GLOBAL bool modeBlending _INIT(true); // enable effect blending
|
|
WLED_GLOBAL bool transitionActive _INIT(false);
|
|
WLED_GLOBAL uint16_t transitionDelay _INIT(750); // global transition duration
|
|
WLED_GLOBAL uint16_t transitionDelayDefault _INIT(750); // default transition time (stored in cfg.json)
|
|
WLED_GLOBAL unsigned long transitionStartTime;
|
|
WLED_GLOBAL float tperLast _INIT(0.0f); // crossfade transition progress, 0.0f - 1.0f
|
|
WLED_GLOBAL bool jsonTransitionOnce _INIT(false); // flag to override transitionDelay (playlist, JSON API: "live" & "seg":{"i"} & "tt")
|
|
WLED_GLOBAL uint8_t randomPaletteChangeTime _INIT(5); // amount of time [s] between random palette changes (min: 1s, max: 255s)
|
|
WLED_GLOBAL bool useHarmonicRandomPalette _INIT(true); // use *harmonic* random palette generation (nicer looking) or truly random
|
|
|
|
// nightlight
|
|
WLED_GLOBAL bool nightlightActive _INIT(false);
|
|
WLED_GLOBAL bool nightlightActiveOld _INIT(false);
|
|
WLED_GLOBAL uint32_t nightlightDelayMs _INIT(10);
|
|
WLED_GLOBAL byte nightlightDelayMinsDefault _INIT(nightlightDelayMins);
|
|
WLED_GLOBAL unsigned long nightlightStartTime;
|
|
WLED_GLOBAL unsigned long lastNlUpdate;
|
|
WLED_GLOBAL byte briNlT _INIT(0); // current nightlight brightness
|
|
WLED_GLOBAL byte colNlT[] _INIT_N(({ 0, 0, 0, 0 })); // current nightlight color
|
|
|
|
// brightness
|
|
WLED_GLOBAL unsigned long lastOnTime _INIT(0);
|
|
WLED_GLOBAL bool offMode _INIT(!turnOnAtBoot);
|
|
WLED_GLOBAL byte bri _INIT(briS); // global brightness (set)
|
|
WLED_GLOBAL byte briOld _INIT(0); // global brightness while in transition loop (previous iteration)
|
|
WLED_GLOBAL byte briT _INIT(0); // global brightness during transition
|
|
WLED_GLOBAL byte briLast _INIT(128); // brightness before turned off. Used for toggle function
|
|
WLED_GLOBAL byte whiteLast _INIT(128); // white channel before turned off. Used for toggle function in ir.cpp
|
|
|
|
// button
|
|
WLED_GLOBAL int8_t btnPin[WLED_MAX_BUTTONS] _INIT({BTNPIN});
|
|
WLED_GLOBAL byte buttonType[WLED_MAX_BUTTONS] _INIT({BTNTYPE});
|
|
WLED_GLOBAL bool buttonPublishMqtt _INIT(false);
|
|
WLED_GLOBAL bool buttonPressedBefore[WLED_MAX_BUTTONS] _INIT({false});
|
|
WLED_GLOBAL bool buttonLongPressed[WLED_MAX_BUTTONS] _INIT({false});
|
|
WLED_GLOBAL unsigned long buttonPressedTime[WLED_MAX_BUTTONS] _INIT({0});
|
|
WLED_GLOBAL unsigned long buttonWaitTime[WLED_MAX_BUTTONS] _INIT({0});
|
|
WLED_GLOBAL bool disablePullUp _INIT(false);
|
|
WLED_GLOBAL byte touchThreshold _INIT(TOUCH_THRESHOLD);
|
|
|
|
// notifications
|
|
WLED_GLOBAL bool sendNotifications _INIT(false); // master notification switch
|
|
WLED_GLOBAL bool sendNotificationsRT _INIT(false); // master notification switch (runtime)
|
|
WLED_GLOBAL unsigned long notificationSentTime _INIT(0);
|
|
WLED_GLOBAL byte notificationSentCallMode _INIT(CALL_MODE_INIT);
|
|
WLED_GLOBAL uint8_t notificationCount _INIT(0);
|
|
|
|
// effects
|
|
WLED_GLOBAL byte effectCurrent _INIT(0);
|
|
WLED_GLOBAL byte effectSpeed _INIT(128);
|
|
WLED_GLOBAL byte effectIntensity _INIT(128);
|
|
WLED_GLOBAL byte effectPalette _INIT(0);
|
|
WLED_GLOBAL bool stateChanged _INIT(false);
|
|
|
|
// network
|
|
WLED_GLOBAL bool udpConnected _INIT(false), udp2Connected _INIT(false), udpRgbConnected _INIT(false);
|
|
|
|
// ui style
|
|
WLED_GLOBAL bool showWelcomePage _INIT(false);
|
|
|
|
// hue
|
|
#ifndef WLED_DISABLE_HUESYNC
|
|
WLED_GLOBAL byte hueError _INIT(HUE_ERROR_INACTIVE);
|
|
// WLED_GLOBAL uint16_t hueFailCount _INIT(0);
|
|
WLED_GLOBAL float hueXLast _INIT(0), hueYLast _INIT(0);
|
|
WLED_GLOBAL uint16_t hueHueLast _INIT(0), hueCtLast _INIT(0);
|
|
WLED_GLOBAL byte hueSatLast _INIT(0), hueBriLast _INIT(0);
|
|
WLED_GLOBAL unsigned long hueLastRequestSent _INIT(0);
|
|
WLED_GLOBAL bool hueAuthRequired _INIT(false);
|
|
WLED_GLOBAL bool hueReceived _INIT(false);
|
|
WLED_GLOBAL bool hueStoreAllowed _INIT(false), hueNewKey _INIT(false);
|
|
#endif
|
|
|
|
// countdown
|
|
WLED_GLOBAL unsigned long countdownTime _INIT(1514764800L);
|
|
WLED_GLOBAL bool countdownOverTriggered _INIT(true);
|
|
|
|
//timer
|
|
WLED_GLOBAL byte lastTimerMinute _INIT(0);
|
|
WLED_GLOBAL byte timerHours[] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }));
|
|
WLED_GLOBAL int8_t timerMinutes[] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }));
|
|
WLED_GLOBAL byte timerMacro[] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }));
|
|
//weekdays to activate on, bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity
|
|
WLED_GLOBAL byte timerWeekday[] _INIT_N(({ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255 }));
|
|
//upper 4 bits start, lower 4 bits end month (default 28: start month 1 and end month 12)
|
|
WLED_GLOBAL byte timerMonth[] _INIT_N(({28,28,28,28,28,28,28,28}));
|
|
WLED_GLOBAL byte timerDay[] _INIT_N(({1,1,1,1,1,1,1,1}));
|
|
WLED_GLOBAL byte timerDayEnd[] _INIT_N(({31,31,31,31,31,31,31,31}));
|
|
|
|
//improv
|
|
WLED_GLOBAL byte improvActive _INIT(0); //0: no improv packet received, 1: improv active, 2: provisioning
|
|
WLED_GLOBAL byte improvError _INIT(0);
|
|
|
|
//playlists
|
|
WLED_GLOBAL int16_t currentPlaylist _INIT(-1);
|
|
//still used for "PL=~" HTTP API command
|
|
WLED_GLOBAL byte presetCycCurr _INIT(0);
|
|
WLED_GLOBAL byte presetCycMin _INIT(1);
|
|
WLED_GLOBAL byte presetCycMax _INIT(5);
|
|
|
|
// realtime
|
|
WLED_GLOBAL byte realtimeMode _INIT(REALTIME_MODE_INACTIVE);
|
|
WLED_GLOBAL byte realtimeOverride _INIT(REALTIME_OVERRIDE_NONE);
|
|
WLED_GLOBAL IPAddress realtimeIP _INIT_N(((0, 0, 0, 0)));
|
|
WLED_GLOBAL unsigned long realtimeTimeout _INIT(0);
|
|
WLED_GLOBAL uint8_t tpmPacketCount _INIT(0);
|
|
WLED_GLOBAL uint16_t tpmPayloadFrameSize _INIT(0);
|
|
WLED_GLOBAL bool useMainSegmentOnly _INIT(false);
|
|
WLED_GLOBAL bool realtimeRespectLedMaps _INIT(true); // Respect LED maps when receiving realtime data
|
|
|
|
WLED_GLOBAL unsigned long lastInterfaceUpdate _INIT(0);
|
|
WLED_GLOBAL byte interfaceUpdateCallMode _INIT(CALL_MODE_INIT);
|
|
|
|
// alexa udp
|
|
WLED_GLOBAL String escapedMac;
|
|
#ifndef WLED_DISABLE_ALEXA
|
|
WLED_GLOBAL Espalexa espalexa;
|
|
WLED_GLOBAL EspalexaDevice* espalexaDevice;
|
|
#endif
|
|
|
|
// dns server
|
|
WLED_GLOBAL DNSServer dnsServer;
|
|
|
|
// network time
|
|
#ifndef WLED_LAT
|
|
#define WLED_LAT 0.0f
|
|
#endif
|
|
#ifndef WLED_LON
|
|
#define WLED_LON 0.0f
|
|
#endif
|
|
#define NTP_NEVER 999000000L
|
|
WLED_GLOBAL bool ntpConnected _INIT(false);
|
|
WLED_GLOBAL time_t localTime _INIT(0);
|
|
WLED_GLOBAL unsigned long ntpLastSyncTime _INIT(NTP_NEVER);
|
|
WLED_GLOBAL unsigned long ntpPacketSentTime _INIT(NTP_NEVER);
|
|
WLED_GLOBAL IPAddress ntpServerIP;
|
|
WLED_GLOBAL uint16_t ntpLocalPort _INIT(2390);
|
|
WLED_GLOBAL uint16_t rolloverMillis _INIT(0);
|
|
WLED_GLOBAL float longitude _INIT(WLED_LON);
|
|
WLED_GLOBAL float latitude _INIT(WLED_LAT);
|
|
WLED_GLOBAL time_t sunrise _INIT(0);
|
|
WLED_GLOBAL time_t sunset _INIT(0);
|
|
WLED_GLOBAL Toki toki _INIT(Toki());
|
|
|
|
// Temp buffer
|
|
WLED_GLOBAL char* obuf;
|
|
WLED_GLOBAL uint16_t olen _INIT(0);
|
|
|
|
// General filesystem
|
|
WLED_GLOBAL size_t fsBytesUsed _INIT(0);
|
|
WLED_GLOBAL size_t fsBytesTotal _INIT(0);
|
|
WLED_GLOBAL unsigned long presetsModifiedTime _INIT(0L);
|
|
WLED_GLOBAL bool doCloseFile _INIT(false);
|
|
|
|
// presets
|
|
WLED_GLOBAL byte currentPreset _INIT(0);
|
|
|
|
WLED_GLOBAL byte errorFlag _INIT(0);
|
|
|
|
WLED_GLOBAL String messageHead, messageSub;
|
|
WLED_GLOBAL byte optionType;
|
|
|
|
WLED_GLOBAL bool doSerializeConfig _INIT(false); // flag to initiate saving of config
|
|
WLED_GLOBAL bool doReboot _INIT(false); // flag to initiate reboot from async handlers
|
|
|
|
WLED_GLOBAL bool psramSafe _INIT(true); // is it safe to use PSRAM (on ESP32 rev.1; compiler fix used "-mfix-esp32-psram-cache-issue")
|
|
|
|
// status led
|
|
#if defined(STATUSLED)
|
|
WLED_GLOBAL unsigned long ledStatusLastMillis _INIT(0);
|
|
WLED_GLOBAL uint8_t ledStatusType _INIT(0); // current status type - corresponds to number of blinks per second
|
|
WLED_GLOBAL bool ledStatusState _INIT(false); // the current LED state
|
|
#endif
|
|
|
|
// server library objects
|
|
WLED_GLOBAL AsyncWebServer server _INIT_N(((80)));
|
|
#ifdef WLED_ENABLE_WEBSOCKETS
|
|
WLED_GLOBAL AsyncWebSocket ws _INIT_N((("/ws")));
|
|
#endif
|
|
#ifndef WLED_DISABLE_HUESYNC
|
|
WLED_GLOBAL AsyncClient *hueClient _INIT(NULL);
|
|
#endif
|
|
WLED_GLOBAL AsyncWebHandler *editHandler _INIT(nullptr);
|
|
|
|
// udp interface objects
|
|
WLED_GLOBAL WiFiUDP notifierUdp, rgbUdp, notifier2Udp;
|
|
WLED_GLOBAL WiFiUDP ntpUdp;
|
|
WLED_GLOBAL ESPAsyncE131 e131 _INIT_N(((handleE131Packet)));
|
|
WLED_GLOBAL ESPAsyncE131 ddp _INIT_N(((handleE131Packet)));
|
|
WLED_GLOBAL bool e131NewData _INIT(false);
|
|
|
|
// led fx library object
|
|
WLED_GLOBAL BusManager busses _INIT(BusManager());
|
|
WLED_GLOBAL WS2812FX strip _INIT(WS2812FX());
|
|
WLED_GLOBAL BusConfig* busConfigs[WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES] _INIT({nullptr}); //temporary, to remember values from network callback until after
|
|
WLED_GLOBAL bool doInitBusses _INIT(false);
|
|
WLED_GLOBAL int8_t loadLedmap _INIT(-1);
|
|
#ifndef ESP8266
|
|
WLED_GLOBAL char *ledmapNames[WLED_MAX_LEDMAPS-1] _INIT_N(({nullptr}));
|
|
#endif
|
|
#if WLED_MAX_LEDMAPS>16
|
|
WLED_GLOBAL uint32_t ledMaps _INIT(0); // bitfield representation of available ledmaps
|
|
#else
|
|
WLED_GLOBAL uint16_t ledMaps _INIT(0); // bitfield representation of available ledmaps
|
|
#endif
|
|
|
|
// Usermod manager
|
|
WLED_GLOBAL UsermodManager usermods _INIT(UsermodManager());
|
|
|
|
// global I2C SDA pin (used for usermods)
|
|
#ifndef I2CSDAPIN
|
|
WLED_GLOBAL int8_t i2c_sda _INIT(-1);
|
|
#else
|
|
WLED_GLOBAL int8_t i2c_sda _INIT(I2CSDAPIN);
|
|
#endif
|
|
// global I2C SCL pin (used for usermods)
|
|
#ifndef I2CSCLPIN
|
|
WLED_GLOBAL int8_t i2c_scl _INIT(-1);
|
|
#else
|
|
WLED_GLOBAL int8_t i2c_scl _INIT(I2CSCLPIN);
|
|
#endif
|
|
|
|
// global SPI DATA/MOSI pin (used for usermods)
|
|
#ifndef SPIMOSIPIN
|
|
WLED_GLOBAL int8_t spi_mosi _INIT(-1);
|
|
#else
|
|
WLED_GLOBAL int8_t spi_mosi _INIT(SPIMOSIPIN);
|
|
#endif
|
|
// global SPI DATA/MISO pin (used for usermods)
|
|
#ifndef SPIMISOPIN
|
|
WLED_GLOBAL int8_t spi_miso _INIT(-1);
|
|
#else
|
|
WLED_GLOBAL int8_t spi_miso _INIT(SPIMISOPIN);
|
|
#endif
|
|
// global SPI CLOCK/SCLK pin (used for usermods)
|
|
#ifndef SPISCLKPIN
|
|
WLED_GLOBAL int8_t spi_sclk _INIT(-1);
|
|
#else
|
|
WLED_GLOBAL int8_t spi_sclk _INIT(SPISCLKPIN);
|
|
#endif
|
|
|
|
// global ArduinoJson buffer
|
|
#if defined(ARDUINO_ARCH_ESP32)
|
|
WLED_GLOBAL JsonDocument *pDoc _INIT(nullptr);
|
|
#else
|
|
WLED_GLOBAL StaticJsonDocument<JSON_BUFFER_SIZE> gDoc;
|
|
WLED_GLOBAL JsonDocument *pDoc _INIT(&gDoc);
|
|
#endif
|
|
WLED_GLOBAL volatile uint8_t jsonBufferLock _INIT(0);
|
|
|
|
// enable additional debug output
|
|
#if defined(WLED_DEBUG_HOST)
|
|
#include "net_debug.h"
|
|
// On the host side, use netcat to receive the log statements: nc -l 7868 -u
|
|
// use -D WLED_DEBUG_HOST='"192.168.xxx.xxx"' or FQDN within quotes
|
|
#define DEBUGOUT NetDebug
|
|
WLED_GLOBAL bool netDebugEnabled _INIT(true);
|
|
WLED_GLOBAL char netDebugPrintHost[33] _INIT(WLED_DEBUG_HOST);
|
|
#ifndef WLED_DEBUG_PORT
|
|
#define WLED_DEBUG_PORT 7868
|
|
#endif
|
|
WLED_GLOBAL int netDebugPrintPort _INIT(WLED_DEBUG_PORT);
|
|
#else
|
|
#define DEBUGOUT Serial
|
|
#endif
|
|
|
|
#ifdef WLED_DEBUG
|
|
#ifndef ESP8266
|
|
#include <rom/rtc.h>
|
|
#endif
|
|
#define DEBUG_PRINT(x) DEBUGOUT.print(x)
|
|
#define DEBUG_PRINTLN(x) DEBUGOUT.println(x)
|
|
#define DEBUG_PRINTF(x...) DEBUGOUT.printf(x)
|
|
#define DEBUG_PRINTF_P(x...) DEBUGOUT.printf_P(x)
|
|
#else
|
|
#define DEBUG_PRINT(x)
|
|
#define DEBUG_PRINTLN(x)
|
|
#define DEBUG_PRINTF(x...)
|
|
#define DEBUG_PRINTF_P(x...)
|
|
#endif
|
|
|
|
#ifdef WLED_DEBUG_FS
|
|
#define DEBUGFS_PRINT(x) DEBUGOUT.print(x)
|
|
#define DEBUGFS_PRINTLN(x) DEBUGOUT.println(x)
|
|
#define DEBUGFS_PRINTF(x...) DEBUGOUT.printf(x)
|
|
#else
|
|
#define DEBUGFS_PRINT(x)
|
|
#define DEBUGFS_PRINTLN(x)
|
|
#define DEBUGFS_PRINTF(x...)
|
|
#endif
|
|
|
|
// debug macro variable definitions
|
|
#ifdef WLED_DEBUG
|
|
WLED_GLOBAL unsigned long debugTime _INIT(0);
|
|
WLED_GLOBAL int lastWifiState _INIT(3);
|
|
WLED_GLOBAL unsigned long wifiStateChangedTime _INIT(0);
|
|
WLED_GLOBAL unsigned loops _INIT(0);
|
|
#endif
|
|
|
|
#ifdef ARDUINO_ARCH_ESP32
|
|
#define WLED_CONNECTED (WiFi.status() == WL_CONNECTED || ETH.localIP()[0] != 0)
|
|
#else
|
|
#define WLED_CONNECTED (WiFi.status() == WL_CONNECTED)
|
|
#endif
|
|
|
|
#ifndef WLED_AP_SSID_UNIQUE
|
|
#define WLED_SET_AP_SSID() do { \
|
|
strcpy_P(apSSID, PSTR(WLED_AP_SSID)); \
|
|
} while(0)
|
|
#else
|
|
#define WLED_SET_AP_SSID() do { \
|
|
snprintf_P(\
|
|
apSSID, \
|
|
sizeof(apSSID)-1, \
|
|
PSTR("%s-%s"), \
|
|
WLED_BRAND, \
|
|
escapedMac.c_str()+6 \
|
|
); \
|
|
} while(0)
|
|
#endif
|
|
|
|
//macro to convert F to const
|
|
#define SET_F(x) (const char*)F(x)
|
|
|
|
//color mangling macros
|
|
#define RGBW32(r,g,b,w) (uint32_t((byte(w) << 24) | (byte(r) << 16) | (byte(g) << 8) | (byte(b))))
|
|
#define R(c) (byte((c) >> 16))
|
|
#define G(c) (byte((c) >> 8))
|
|
#define B(c) (byte(c))
|
|
#define W(c) (byte((c) >> 24))
|
|
|
|
class WLED {
|
|
public:
|
|
WLED();
|
|
static WLED& instance()
|
|
{
|
|
static WLED instance;
|
|
return instance;
|
|
}
|
|
|
|
// boot starts here
|
|
void setup();
|
|
|
|
void loop();
|
|
void reset();
|
|
|
|
void beginStrip();
|
|
void handleConnection();
|
|
bool initEthernet(); // result is informational
|
|
void initAP(bool resetAP = false);
|
|
void initConnection();
|
|
void initInterfaces();
|
|
int8_t findWiFi(bool doScan = false);
|
|
#if defined(STATUSLED)
|
|
void handleStatusLED();
|
|
#endif
|
|
#if WLED_WATCHDOG_TIMEOUT > 0
|
|
void enableWatchdog();
|
|
void disableWatchdog();
|
|
#endif
|
|
};
|
|
#endif // WLED_H
|