kopia lustrzana https://github.com/Aircoookie/WLED
498 wiersze
18 KiB
INI
498 wiersze
18 KiB
INI
# Example PlatformIO Project Configuration Override
|
|
# ------------------------------------------------------------------------------
|
|
# Copy to platformio_override.ini to activate overrides
|
|
# ------------------------------------------------------------------------------
|
|
# Please visit documentation: https://docs.platformio.org/page/projectconf.html
|
|
|
|
[platformio]
|
|
default_envs = WLED_tasmota_1M # define as many as you need
|
|
|
|
#----------
|
|
# SAMPLE
|
|
#----------
|
|
[env:WLED_tasmota_1M]
|
|
extends = env:esp01_1m_full # when you want to extend the existing environment (define only updated options)
|
|
; board = esp01_1m # uncomment when ou need different board
|
|
; platform = ${common.platform_wled_default} # uncomment and change when you want particular platform
|
|
; platform_packages = ${common.platform_packages}
|
|
; board_build.ldscript = ${common.ldscript_1m128k}
|
|
; upload_speed = 921600 # fast upload speed (remove ';' if your board supports fast upload speed)
|
|
# Sample libraries used for various usermods. Uncomment when using particular usermod.
|
|
lib_deps = ${esp8266.lib_deps}
|
|
; olikraus/U8g2 # @~2.33.15
|
|
; paulstoffregen/OneWire@~2.3.8
|
|
; adafruit/Adafruit Unified Sensor@^1.1.4
|
|
; adafruit/DHT sensor library@^1.4.1
|
|
; adafruit/Adafruit BME280 Library@^2.2.2
|
|
; Wire
|
|
; robtillaart/SHT85@~0.3.3
|
|
; gmag11/QuickESPNow ;@ 0.6.2
|
|
; https://github.com/blazoncek/QuickESPNow.git#optional-debug ;; exludes debug library
|
|
; https://github.com/kosme/arduinoFFT#develop @ 2.0.1 ;; used for USERMOD_AUDIOREACTIVE
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
|
;
|
|
; *** To use the below defines/overrides, copy and paste each onto it's own line just below build_flags in the section above.
|
|
;
|
|
; Set a release name that may be used to distinguish required binary for flashing
|
|
; -D WLED_RELEASE_NAME=ESP32_MULTI_USREMODS
|
|
;
|
|
; disable specific features
|
|
; -D WLED_DISABLE_OTA
|
|
; -D WLED_DISABLE_ALEXA
|
|
; -D WLED_DISABLE_HUESYNC
|
|
; -D WLED_DISABLE_LOXONE
|
|
; -D WLED_DISABLE_INFRARED
|
|
; -D WLED_DISABLE_WEBSOCKETS
|
|
; -D WLED_DISABLE_MQTT
|
|
; -D WLED_DISABLE_ADALIGHT
|
|
; -D WLED_DISABLE_2D
|
|
; -D WLED_DISABLE_PXMAGIC
|
|
; -D WLED_DISABLE_ESPNOW
|
|
; -D WLED_DISABLE_BROWNOUT_DET
|
|
;
|
|
; PIN defines - uncomment and change, if needed:
|
|
; -D LEDPIN=2
|
|
; or use this for multiple outputs
|
|
; -D DATA_PINS=1,3
|
|
; -D BTNPIN=0
|
|
; -D IRPIN=4
|
|
; -D RLYPIN=12
|
|
; -D RLYMDE=1
|
|
; -D LED_BUILTIN=2 # GPIO of built-in LED
|
|
;
|
|
; Limit max buses
|
|
; -D WLED_MAX_BUSSES=2
|
|
;
|
|
; Configure default WiFi
|
|
; -D CLIENT_SSID='"MyNetwork"'
|
|
; -D CLIENT_PASS='"Netw0rkPassw0rd"'
|
|
;
|
|
; Configure and use Ethernet
|
|
; -D WLED_USE_ETHERNET
|
|
; -D WLED_ETH_DEFAULT=5
|
|
; do not use pins 5, (16,) 17, 18, 19, 21, 22, 23, 25, 26, 27 for anything but ethernet
|
|
; -D PHY_ADDR=0 -D ETH_PHY_POWER=5 -D ETH_PHY_MDC=23 -D ETH_PHY_MDIO=18
|
|
; -D ETH_CLK_MODE=ETH_CLOCK_GPIO17_OUT
|
|
;
|
|
; NTP time configuration
|
|
; -D WLED_NTP_ENABLED=true
|
|
; -D WLED_TIMEZONE=2
|
|
; -D WLED_LAT=48.86
|
|
; -D WLED_LON=2.33
|
|
;
|
|
; Use Watchdog timer with 10s guard
|
|
; -D WLED_WATCHDOG_TIMEOUT=10
|
|
;
|
|
; Create debug build (with remote debug)
|
|
; -D WLED_DEBUG
|
|
; -D WLED_DEBUG_HOST='"192.168.0.100"'
|
|
; -D WLED_DEBUG_PORT=7868
|
|
;
|
|
; Use Autosave usermod and set it to do save after 90s
|
|
; -D USERMOD_AUTO_SAVE
|
|
; -D AUTOSAVE_AFTER_SEC=90
|
|
;
|
|
; Use 4 Line Display usermod with SPI display
|
|
; -D USERMOD_FOUR_LINE_DISPLAY
|
|
; -D USE_ALT_DISPlAY # mandatory
|
|
; -DFLD_SPI_DEFAULT
|
|
; -D FLD_TYPE=SSD1306_SPI64
|
|
; -D FLD_PIN_CLOCKSPI=14
|
|
; -D FLD_PIN_DATASPI=13
|
|
; -D FLD_PIN_DC=26
|
|
; -D FLD_PIN_CS=15
|
|
; -D FLD_PIN_RESET=27
|
|
;
|
|
; Use Rotary encoder usermod (in conjunction with 4LD)
|
|
; -D USERMOD_ROTARY_ENCODER_UI
|
|
; -D ENCODER_DT_PIN=5
|
|
; -D ENCODER_CLK_PIN=18
|
|
; -D ENCODER_SW_PIN=19
|
|
;
|
|
; Use Dallas DS18B20 temperature sensor usermod and configure it to use GPIO13
|
|
; -D USERMOD_DALLASTEMPERATURE
|
|
; -D TEMPERATURE_PIN=13
|
|
;
|
|
; Use Multi Relay usermod and configure it to use 6 relays and appropriate GPIO
|
|
; -D USERMOD_MULTI_RELAY
|
|
; -D MULTI_RELAY_MAX_RELAYS=6
|
|
; -D MULTI_RELAY_PINS=12,23,22,21,24,25
|
|
;
|
|
; Use PIR sensor usermod and configure it to use GPIO4 and timer of 60s
|
|
; -D USERMOD_PIRSWITCH
|
|
; -D PIR_SENSOR_PIN=4
|
|
; -D PIR_SENSOR_OFF_SEC=60
|
|
;
|
|
; Use Audioreactive usermod and configure I2S microphone
|
|
; -D USERMOD_AUDIOREACTIVE
|
|
; -D UM_AUDIOREACTIVE_USE_NEW_FFT
|
|
; -D AUDIOPIN=-1
|
|
; -D DMTYPE=1 # 0-analog/disabled, 1-I2S generic, 2-ES7243, 3-SPH0645, 4-I2S+mclk, 5-I2S PDM
|
|
; -D I2S_SDPIN=36
|
|
; -D I2S_WSPIN=23
|
|
; -D I2S_CKPIN=19
|
|
;
|
|
; Use PWM fan usermod
|
|
; -D USERMOD_PWM_FAN
|
|
; -D TACHO_PIN=33
|
|
; -D PWM_PIN=32
|
|
;
|
|
; Use built-in or custom LED as a status indicator (assumes LED is connected to GPIO16)
|
|
; -D STATUSLED=16
|
|
;
|
|
; set the name of the module - make sure there is a quote-backslash-quote before the name and a backslash-quote-quote after the name
|
|
; -D SERVERNAME="\"WLED\""
|
|
;
|
|
; set the number of LEDs
|
|
; -D DEFAULT_LED_COUNT=30
|
|
; or this for multiple outputs
|
|
; -D PIXEL_COUNTS=30,30
|
|
;
|
|
; set milliampere limit when using ESP pin to power leds
|
|
; -D ABL_MILLIAMPS_DEFAULT=850
|
|
;
|
|
; enable IR by setting remote type
|
|
; -D IRTYPE=0 ;0 Remote disabled | 1 24-key RGB | 2 24-key with CT | 3 40-key blue | 4 40-key RGB | 5 21-key RGB | 6 6-key black | 7 9-key red | 8 JSON remote
|
|
;
|
|
; set default color order of your led strip
|
|
; -D DEFAULT_LED_COLOR_ORDER=COL_ORDER_GRB
|
|
;
|
|
; use PSRAM on classic ESP32 rev.1 (rev.3 or above has no issues)
|
|
; -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue
|
|
;
|
|
; configure I2C and SPI interface (for various hardware)
|
|
; -D I2CSDAPIN=33 # initialise interface
|
|
; -D I2CSCLPIN=35 # initialise interface
|
|
; -D HW_PIN_SCL=35
|
|
; -D HW_PIN_SDA=33
|
|
; -D HW_PIN_CLOCKSPI=7
|
|
; -D HW_PIN_DATASPI=11
|
|
; -D HW_PIN_MISOSPI=9
|
|
|
|
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# PRE-CONFIGURED DEVELOPMENT BOARDS AND CONTROLLERS
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:esp07]
|
|
board = esp07
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
upload_speed = 921600
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
monitor_filters = esp8266_exception_decoder
|
|
|
|
[env:heltec_wifi_kit_8]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:h803wf]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp32dev_qio80]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
|
|
lib_deps = ${esp32.lib_deps}
|
|
monitor_filters = esp32_exception_decoder
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = qio
|
|
|
|
[env:esp32dev_V4_dio80]
|
|
;; experimental ESP32 env using ESP-IDF V4.4.x
|
|
;; Warning: this build environment is not stable!!
|
|
;; please erase your device before installing.
|
|
board = esp32dev
|
|
platform = ${esp32_idf_V4.platform}
|
|
platform_packages = ${esp32_idf_V4.platform_packages}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
|
|
lib_deps = ${esp32_idf_V4.lib_deps}
|
|
monitor_filters = esp32_exception_decoder
|
|
board_build.partitions = ${esp32_idf_V4.default_partitions}
|
|
board_build.f_flash = 80000000L
|
|
board_build.flash_mode = dio
|
|
|
|
[env:esp32s2_saola]
|
|
board = esp32-s2-saola-1
|
|
platform = ${esp32s2.platform}
|
|
platform_packages = ${esp32s2.platform_packages}
|
|
framework = arduino
|
|
board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
|
|
board_build.flash_mode = qio
|
|
upload_speed = 460800
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32s2.build_flags}
|
|
;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
|
|
-DARDUINO_USB_CDC_ON_BOOT=1
|
|
lib_deps = ${esp32s2.lib_deps}
|
|
|
|
[env:esp32s3dev_8MB_PSRAM_qspi]
|
|
;; ESP32-TinyS3 development board, with 8MB FLASH and PSRAM (memory_type: qio_qspi)
|
|
extends = env:esp32s3dev_8MB_PSRAM_opi
|
|
;board = um_tinys3 ; -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
|
|
board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
|
|
board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
|
|
|
|
[env:esp8285_4CH_MagicHome]
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp8285_H801]
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini_5CH_Shojo_PCB]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_USE_SHOJO_PCB
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini_debug]
|
|
board = d1_mini
|
|
build_type = debug
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} ${common.debug_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:d1_mini_ota]
|
|
board = d1_mini
|
|
upload_protocol = espota
|
|
# exchange for your WLED IP
|
|
upload_port = "10.10.1.27"
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:anavi_miracle_controller]
|
|
board = d1_mini
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:esp32c3dev_2MB]
|
|
;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
|
|
;; this board need a specific partition file. OTA not possible.
|
|
extends = esp32c3
|
|
platform = ${esp32c3.platform}
|
|
platform_packages = ${esp32c3.platform_packages}
|
|
board = esp32-c3-devkitm-1
|
|
build_flags = ${common.build_flags} ${esp32c3.build_flags}
|
|
-D WLED_WATCHDOG_TIMEOUT=0
|
|
-D WLED_DISABLE_OTA
|
|
; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
|
|
-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip
|
|
build_unflags = ${common.build_unflags}
|
|
upload_speed = 115200
|
|
lib_deps = ${esp32c3.lib_deps}
|
|
board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
|
|
board_build.flash_mode = dio
|
|
|
|
[env:wemos_shield_esp32]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
upload_speed = 460800
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32.build_flags}
|
|
-D LEDPIN=16
|
|
-D RLYPIN=19
|
|
-D BTNPIN=17
|
|
-D IRPIN=18
|
|
-D UWLED_USE_MY_CONFIG
|
|
-D USERMOD_DALLASTEMPERATURE
|
|
-D USERMOD_FOUR_LINE_DISPLAY
|
|
-D TEMPERATURE_PIN=23
|
|
-D USE_ALT_DISPlAY ; new versions of USERMOD_FOUR_LINE_DISPLAY and USERMOD_ROTARY_ENCODER_UI
|
|
-D USERMOD_AUDIOREACTIVE
|
|
lib_deps = ${esp32.lib_deps}
|
|
OneWire@~2.3.5
|
|
olikraus/U8g2 @ ^2.28.8
|
|
https://github.com/blazoncek/arduinoFFT.git
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:m5atom]
|
|
board = esp32dev
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp32.build_flags} -D LEDPIN=27 -D BTNPIN=39
|
|
lib_deps = ${esp32.lib_deps}
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
board_build.partitions = ${esp32.default_partitions}
|
|
|
|
[env:sp501e]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=3 -D BTNPIN=1
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:sp511e]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:Athom_RGBCW] ;7w and 5w(GU10) bulbs
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
|
|
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:Athom_15w_RGBCW] ;15w bulb
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
|
|
-D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:Athom_3Pin_Controller] ;small controller with only data
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:Athom_4Pin_Controller] ; With clock and data interface
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:Athom_5Pin_Controller] ;Analog light strip controller
|
|
board = esp8285
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:MY9291]
|
|
board = esp01_1m
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_1m128k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA -D USERMOD_MY9291
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# codm pixel controller board configurations
|
|
# codm-controller-0_6 can also be used for the TYWE3S controller
|
|
# ------------------------------------------------------------------------------
|
|
|
|
[env:codm-controller-0_6]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_2m512k}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
[env:codm-controller-0_6-rev2]
|
|
board = esp_wroom_02
|
|
platform = ${common.platform_wled_default}
|
|
platform_packages = ${common.platform_packages}
|
|
board_build.ldscript = ${common.ldscript_4m1m}
|
|
build_unflags = ${common.build_unflags}
|
|
build_flags = ${common.build_flags} ${esp8266.build_flags}
|
|
lib_deps = ${esp8266.lib_deps}
|
|
|
|
# ------------------------------------------------------------------------------
|
|
# EleksTube-IPS
|
|
# ------------------------------------------------------------------------------
|
|
[env:elekstube_ips]
|
|
board = esp32dev
|
|
platform = ${esp32.platform}
|
|
platform_packages = ${esp32.platform_packages}
|
|
upload_speed = 921600
|
|
build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
|
|
-D USERMOD_RTC
|
|
-D USERMOD_ELEKSTUBE_IPS
|
|
-D LEDPIN=12
|
|
-D RLYPIN=27
|
|
-D BTNPIN=34
|
|
-D DEFAULT_LED_COUNT=6
|
|
# Display config
|
|
-D ST7789_DRIVER
|
|
-D TFT_WIDTH=135
|
|
-D TFT_HEIGHT=240
|
|
-D CGRAM_OFFSET
|
|
-D TFT_SDA_READ
|
|
-D TFT_MOSI=23
|
|
-D TFT_SCLK=18
|
|
-D TFT_DC=25
|
|
-D TFT_RST=26
|
|
-D SPI_FREQUENCY=40000000
|
|
-D USER_SETUP_LOADED
|
|
monitor_filters = esp32_exception_decoder
|
|
lib_deps =
|
|
${esp32.lib_deps}
|
|
TFT_eSPI @ ^2.3.70
|
|
board_build.partitions = ${esp32.default_partitions}
|