WLED/usermods/Enclosure_with_OLED_temp_ESP07/usermod_bme280.cpp

227 wiersze
7.0 KiB
C++
Czysty Wina Historia

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

#ifndef WLED_ENABLE_MQTT
#error "This user mod requires MQTT to be enabled."
#endif
#include "wled.h"
#include <Arduino.h>
#include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
#include <Wire.h>
#include <BME280I2C.h> //BME280 sensor
void UpdateBME280Data();
#define Celsius // Show temperature mesaurement in Celcius otherwise is in Fahrenheit
BME280I2C bme; // Default : forced mode, standby time = 1000 ms
// Oversampling = pressure ×1, temperature ×1, humidity ×1, filter off,
#ifdef ARDUINO_ARCH_ESP32 //ESP32 boards
uint8_t SCL_PIN = 22;
uint8_t SDA_PIN = 21;
#else //ESP8266 boards
uint8_t SCL_PIN = 5;
uint8_t SDA_PIN = 4;
// uint8_t RST_PIN = 16; // Uncoment for Heltec WiFi-Kit-8
#endif
//The SCL and SDA pins are defined here.
//ESP8266 Wemos D1 mini board use SCL=5 SDA=4 while ESP32 Wemos32 mini board use SCL=22 SDA=21
#define U8X8_PIN_SCL SCL_PIN
#define U8X8_PIN_SDA SDA_PIN
//#define U8X8_PIN_RESET RST_PIN // Uncoment for Heltec WiFi-Kit-8
// If display does not work or looks corrupted check the
// constructor reference:
// https://github.com/olikraus/u8g2/wiki/u8x8setupcpp
// or check the gallery:
// https://github.com/olikraus/u8g2/wiki/gallery
// --> First choise of cheap I2C OLED 128X32 0.91"
U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
// --> Second choise of cheap I2C OLED 128X64 0.96" or 1.3"
//U8X8_SSD1306_128X64_NONAME_HW_I2C u8x8(U8X8_PIN_NONE, U8X8_PIN_SCL, U8X8_PIN_SDA); // Pins are Reset, SCL, SDA
// --> Third choise of Heltec WiFi-Kit-8 OLED 128X32 0.91"
//U8X8_SSD1306_128X32_UNIVISION_HW_I2C u8x8(U8X8_PIN_RESET, U8X8_PIN_SCL, U8X8_PIN_SDA); // Constructor for Heltec WiFi-Kit-8
// gets called once at boot. Do all initialization that doesn't depend on network here
// BME280 sensor timer
long tempTimer = millis();
long lastMeasure = 0;
float SensorPressure(NAN);
float SensorTemperature(NAN);
float SensorHumidity(NAN);
void userSetup() {
u8x8.begin();
u8x8.setPowerSave(0);
u8x8.setFlipMode(1);
u8x8.setContrast(10); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
u8x8.setFont(u8x8_font_chroma48medium8_r);
u8x8.drawString(0, 0, "Loading...");
Wire.begin(SDA_PIN,SCL_PIN);
while(!bme.begin())
{
Serial.println("Could not find BME280I2C sensor!");
delay(1000);
}
switch(bme.chipModel())
{
case BME280::ChipModel_BME280:
Serial.println("Found BME280 sensor! Success.");
break;
case BME280::ChipModel_BMP280:
Serial.println("Found BMP280 sensor! No Humidity available.");
break;
default:
Serial.println("Found UNKNOWN sensor! Error!");
}
}
// gets called every time WiFi is (re-)connected. Initialize own network
// interfaces here
void userConnected() {}
// needRedraw marks if redraw is required to prevent often redrawing.
bool needRedraw = true;
// Next variables hold the previous known values to determine if redraw is
// required.
String knownSsid = "";
IPAddress knownIp;
uint8_t knownBrightness = 0;
uint8_t knownMode = 0;
uint8_t knownPalette = 0;
long lastUpdate = 0;
long lastRedraw = 0;
bool displayTurnedOff = false;
// How often we are redrawing screen
#define USER_LOOP_REFRESH_RATE_MS 5000
void userLoop() {
// BME280 sensor MQTT publishing
tempTimer = millis();
// Timer to publish new sensor data every 60 seconds
if (tempTimer - lastMeasure > 60000)
{
lastMeasure = tempTimer;
// Check if MQTT Connected, otherwise it will crash the 8266
if (mqtt != nullptr)
{
UpdateBME280Data();
float board_temperature = SensorTemperature;
float board_pressure = SensorPressure;
float board_humidity = SensorHumidity;
// Create string populated with user defined device topic from the UI, and the read temperature, humidity and pressure. Then publish to MQTT server.
String t = String(mqttDeviceTopic);
t += "/temperature";
mqtt->publish(t.c_str(), 0, true, String(board_temperature).c_str());
String p = String(mqttDeviceTopic);
p += "/pressure";
mqtt->publish(p.c_str(), 0, true, String(board_pressure).c_str());
String h = String(mqttDeviceTopic);
h += "/humidity";
mqtt->publish(h.c_str(), 0, true, String(board_humidity).c_str());
}
}
// Check if we time interval for redrawing passes.
if (millis() - lastUpdate < USER_LOOP_REFRESH_RATE_MS) {
return;
}
lastUpdate = millis();
// Turn off display after 3 minutes with no change.
if(!displayTurnedOff && millis() - lastRedraw > 3*60*1000) {
u8x8.setPowerSave(1);
displayTurnedOff = true;
}
// Check if values which are shown on display changed from the last time.
if (((apActive) ? String(apSSID) : WiFi.SSID()) != knownSsid) {
needRedraw = true;
} else if (knownIp != (apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP())) {
needRedraw = true;
} else if (knownBrightness != bri) {
needRedraw = true;
} else if (knownMode != strip.getMainSegment().mode) {
needRedraw = true;
} else if (knownPalette != strip.getMainSegment().palette) {
needRedraw = true;
}
if (!needRedraw) {
return;
}
needRedraw = false;
if (displayTurnedOff)
{
u8x8.setPowerSave(0);
displayTurnedOff = false;
}
lastRedraw = millis();
// Update last known values.
#if defined(ESP8266)
knownSsid = apActive ? WiFi.softAPSSID() : WiFi.SSID();
#else
knownSsid = WiFi.SSID();
#endif
knownIp = apActive ? IPAddress(4, 3, 2, 1) : WiFi.localIP();
knownBrightness = bri;
knownMode = strip.getMainSegment().mode;
knownPalette = strip.getMainSegment().palette;
u8x8.clear();
u8x8.setFont(u8x8_font_chroma48medium8_r);
// First row with Wifi name
u8x8.setCursor(1, 0);
u8x8.print(knownSsid.substring(0, u8x8.getCols() > 1 ? u8x8.getCols() - 2 : 0));
// Print `~` char to indicate that SSID is longer, than owr dicplay
if (knownSsid.length() > u8x8.getCols())
u8x8.print("~");
// Second row with IP or Psssword
u8x8.setCursor(1, 1);
// Print password in AP mode and if led is OFF.
if (apActive && bri == 0)
u8x8.print(apPass);
else
u8x8.print(knownIp);
// Third row with mode name
u8x8.setCursor(2, 2);
char lineBuffer[17];
extractModeName(knownMode, JSON_mode_names, lineBuffer, 16);
u8x8.print(lineBuffer);
// Fourth row with palette name
u8x8.setCursor(2, 3);
extractModeName(knownPalette, JSON_palette_names, lineBuffer, 16);
u8x8.print(lineBuffer);
u8x8.setFont(u8x8_font_open_iconic_embedded_1x1);
u8x8.drawGlyph(0, 0, 80); // wifi icon
u8x8.drawGlyph(0, 1, 68); // home icon
u8x8.setFont(u8x8_font_open_iconic_weather_2x2);
u8x8.drawGlyph(0, 2, 66 + (bri > 0 ? 3 : 0)); // sun/moon icon
}
void UpdateBME280Data() {
float temp(NAN), hum(NAN), pres(NAN);
#ifdef Celsius
BME280::TempUnit tempUnit(BME280::TempUnit_Celsius);
#else
BME280::TempUnit tempUnit(BME280::TempUnit_Fahrenheit);
#endif
BME280::PresUnit presUnit(BME280::PresUnit_Pa);
bme.read(pres, temp, hum, tempUnit, presUnit);
SensorTemperature=temp;
SensorHumidity=hum;
SensorPressure=pres;
}