23aad24027
Fixing Stairway: missing setup function Adding builflags: USERMOD_STAIRCASE_WIPE to install the usermod |
||
|---|---|---|
| .. | ||
| readme.md | ||
| stairway-wipe-usermod-v2.h | ||
| wled06_usermod.ino | ||
readme.md
Stairway lighting
Install
Add the buildflag -D USERMOD_STAIRCASE_WIPE to your enviroment to activate it.
Configuration
-D STAIRCASE_WIPE_OFF
Have the LEDs wipe off instead of fading out
Description
Quick usermod to accomplish something similar to this video.
This usermod enables you to add a lightstrip alongside or on the steps of a staircase.
When the userVar0 variable is set, the LEDs will gradually turn on in a Wipe effect.
Both directions are supported by setting userVar0 to 1 and 2, respectively (HTTP API commands U0=1 and U0=2).
After the Wipe is complete, the light will either stay on (Solid effect) indefinitely or extinguish after userVar1 seconds have elapsed.
If userVar0 is updated (e.g. by triggering a second sensor) the light will fade slowly until it's off.
This could be extended to also run a Wipe effect in reverse order to turn the LEDs off.
This is just a basic version to accomplish this using HTTP API calls U0 and U1 and/or macros.
It should be easy to adapt this code to interface with motion sensors or other input devices.