Historia

Blaz Kristan 82e448de7c Beta-3 changes - remove I2C init from usermods - PCF8574 (&co) port expander support - refactor PIR & Rotary encoder & 4LD - reboot race condition - optimisations		2023-05-30 19:36:14 +02:00
..
readme.md	…
usermod_si7021_mqtt_ha.h	Beta-3 changes	2023-05-30 19:36:14 +02:00

readme.md

Si7021 to MQTT (with Home Assistant Auto Discovery) usermod

This usermod implements support for Si7021 I²C temperature and humidity sensors.

As of this writing, the sensor data will not be shown on the WLED UI, but it is published via MQTT to WLED's "built-in" MQTT device topic.

temperature: $mqttDeviceTopic/si7021_temperature
humidity: $mqttDeviceTopic/si7021_humidity

The following sensors can also be published:

heat_index: $mqttDeviceTopic/si7021_heat_index
dew_point: $mqttDeviceTopic/si7021_dew_point
absolute_humidity: $mqttDeviceTopic/si7021_absolute_humidity

Sensor data will be updated/sent every 60 seconds.

This usermod also supports Home Assistant Auto Discovery.

Settings via Usermod Setup

enabled: Enables this usermod
Send Dew Point, Abs. Humidity and Heat Index: Enables additional sensors
Home Assistant MQTT Auto-Discovery: Enables Home Assistant Auto Discovery

Installation

Hardware

Attach the Si7021 sensor to the I²C interface.

Default PINs ESP32:

SCL_PIN = 22;
SDA_PIN = 21;

Default PINs ESP8266:

SCL_PIN = 5;
SDA_PIN = 4;

Software

Add to build_flags in platformio.ini:

   -D USERMOD_SI7021_MQTT_HA

Add to lib_deps in platformio.ini:

   adafruit/Adafruit Si7021 Library @ 1.4.0
   BME280@~3.0.0

Credits

Aircoookie for making WLED
Other usermod creators for example code (sensors_to_mqtt and multi_relay especially)
You, for reading this