; PlatformIO Project Configuration File ; Please visit documentation: https://docs.platformio.org/page/projectconf.html [platformio] # ------------------------------------------------------------------------------ # ENVIRONMENTS # # Please uncomment one of the lines below to select your board(s) # (use `platformio_override.ini` when building for your own board; see `platformio_override.ini.sample` for an example) # ------------------------------------------------------------------------------ # CI/release binaries default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_16MB_opi, esp32s3dev_8MB_opi, esp32s3_4M_qspi, esp32_wrover src_dir = ./wled00 data_dir = ./wled00/data build_cache_dir = ~/.buildcache extra_configs = platformio_override.ini [common] # ------------------------------------------------------------------------------ # PLATFORM: # !! DO NOT confuse platformio's ESP8266 development platform with Arduino core for ESP8266 # # arduino core 2.6.3 = platformIO 2.3.2 # arduino core 2.7.0 = platformIO 2.5.0 # ------------------------------------------------------------------------------ arduino_core_2_6_3 = espressif8266@2.3.3 arduino_core_2_7_4 = espressif8266@2.6.2 arduino_core_3_0_0 = espressif8266@3.0.0 arduino_core_3_0_2 = espressif8266@3.2.0 arduino_core_3_1_0 = espressif8266@4.1.0 arduino_core_3_1_2 = espressif8266@4.2.1 # Development platforms arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage # Platform to use for ESP8266 platform_wled_default = ${common.arduino_core_3_1_2} # We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization #platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7 platform_packages = platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502 platformio/tool-esptool #@ ~1.413.0 platformio/tool-esptoolpy #@ ~1.30000.0 ## previous platform for 8266, in case of problems with the new one ## you'll need makuna/NeoPixelBus@ 2.6.9 for arduino_core_3_0_2, which does not support Ucs890x ;; platform_wled_default = ${common.arduino_core_3_0_2} ;; platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7 ;; platformio/toolchain-xtensa @ ~2.40802.200502 ;; platformio/tool-esptool @ ~1.413.0 ;; platformio/tool-esptoolpy @ ~1.30000.0 # ------------------------------------------------------------------------------ # FLAGS: DEBUG # esp8266 : see https://docs.platformio.org/en/latest/platforms/espressif8266.html#debug-level # esp32 : see https://docs.platformio.org/en/latest/platforms/espressif32.html#debug-level # ------------------------------------------------------------------------------ debug_flags = -D DEBUG=1 -D WLED_DEBUG -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM ;; for esp8266 # if needed (for memleaks etc) also add; -DDEBUG_ESP_OOM -include "umm_malloc/umm_malloc_cfg.h" # -DDEBUG_ESP_CORE is not working right now # ------------------------------------------------------------------------------ # FLAGS: ldscript (available ldscripts at https://github.com/esp8266/Arduino/tree/master/tools/sdk/ld) # ldscript_2m1m (2048 KB) = 1019 KB sketch, 4 KB eeprom, 1004 KB spiffs, 16 KB reserved # ldscript_4m1m (4096 KB) = 1019 KB sketch, 4 KB eeprom, 1002 KB spiffs, 16 KB reserved, 2048 KB empty/ota? # # Available lwIP variants (macros): # -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH = v1.4 Higher Bandwidth (default) # -DPIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY = v2 Lower Memory # -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH = v2 Higher Bandwidth # -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH # # BearSSL performance: # When building with -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL, please add `board_build.f_cpu = 160000000` to the environment configuration # # BearSSL ciphers: # When building on core >= 2.5, you can add the build flag -DBEARSSL_SSL_BASIC in order to build BearSSL with a limited set of ciphers: # TLS_RSA_WITH_AES_128_CBC_SHA256 / AES128-SHA256 # TLS_RSA_WITH_AES_256_CBC_SHA256 / AES256-SHA256 # TLS_RSA_WITH_AES_128_CBC_SHA / AES128-SHA # TLS_RSA_WITH_AES_256_CBC_SHA / AES256-SHA # This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m). # ------------------------------------------------------------------------------ build_flags = -DMQTT_MAX_PACKET_SIZE=1024 -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL -DBEARSSL_SSL_BASIC -D CORE_DEBUG_LEVEL=0 -D NDEBUG -Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeoPixelBus #build_flags for the IRremoteESP8266 library (enabled decoders have to appear here) -D _IR_ENABLE_DEFAULT_=false -D DECODE_HASH=true -D DECODE_NEC=true -D DECODE_SONY=true -D DECODE_SAMSUNG=true -D DECODE_LG=true -DWLED_USE_MY_CONFIG build_unflags = ldscript_1m128k = eagle.flash.1m128.ld ldscript_2m512k = eagle.flash.2m512.ld ldscript_2m1m = eagle.flash.2m1m.ld ldscript_4m1m = eagle.flash.4m1m.ld [scripts_defaults] extra_scripts = pre:pio-scripts/set_version.py post:pio-scripts/output_bins.py post:pio-scripts/strip-floats.py pre:pio-scripts/user_config_copy.py pre:pio-scripts/build_ui.py # ------------------------------------------------------------------------------ # COMMON SETTINGS: # ------------------------------------------------------------------------------ [env] framework = arduino board_build.flash_mode = dout monitor_speed = 115200 # slow upload speed but most compatible (use platformio_override.ini to use faster speed) upload_speed = 115200 # ------------------------------------------------------------------------------ # LIBRARIES: required dependencies # Please note that we don't always use the latest version of a library. # # The following libraries have been included (and some of them changed) in the source: # ArduinoJson@5.13.5, E131@1.0.0(changed), Time@1.5, Timezone@1.2.1 # ------------------------------------------------------------------------------ lib_compat_mode = strict lib_deps = fastled/FastLED @ 3.6.0 IRremoteESP8266 @ 2.8.2 makuna/NeoPixelBus @ 2.7.9 https://github.com/Aircoookie/ESPAsyncWebServer.git @ 2.2.1 # for I2C interface ;Wire # ESP-NOW library ;gmag11/QuickESPNow @ ~0.7.0 https://github.com/blazoncek/QuickESPNow.git#optional-debug #For use of the TTGO T-Display ESP32 Module with integrated TFT display uncomment the following line #TFT_eSPI #For compatible OLED display uncomment following #olikraus/U8g2 #@ ~2.33.15 #For Dallas sensor uncomment following #paulstoffregen/OneWire @ ~2.3.8 #For BME280 sensor uncomment following #BME280 @ ~3.0.0 ;adafruit/Adafruit BMP280 Library @ 2.1.0 ;adafruit/Adafruit CCS811 Library @ 1.0.4 ;adafruit/Adafruit Si7021 Library @ 1.4.0 #For ADS1115 sensor uncomment following ;adafruit/Adafruit BusIO @ 1.13.2 ;adafruit/Adafruit ADS1X15 @ 2.4.0 #For MAX1704x Lipo Monitor / Fuel Gauge uncomment following ; https://github.com/adafruit/Adafruit_BusIO @ 1.14.5 ; https://github.com/adafruit/Adafruit_MAX1704X @ 1.0.2 #For MPU6050 IMU uncomment follwoing ;electroniccats/MPU6050 @1.0.1 # For -D USERMOD_ANIMARTRIX # CC BY-NC 3.0 licensed effects by Stefan Petrick, include this usermod only if you accept the terms! ;https://github.com/netmindz/animartrix.git#18bf17389e57c69f11bc8d04ebe1d215422c7fb7 # SHT85 ;robtillaart/SHT85@~0.3.3 # Audioreactive usermod ;kosme/arduinoFFT @ 2.0.1 extra_scripts = ${scripts_defaults.extra_scripts} [esp8266] build_flags = -DESP8266 -DFP_IN_IROM ;-Wno-deprecated-declarations ;-Wno-register ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous -Wno-misleading-indentation ; NONOSDK22x_190703 = 2.2.2-dev(38a443e) -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703 ; lwIP 2 - Higher Bandwidth no Features ; -DPIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH_LOW_FLASH ; lwIP 1.4 - Higher Bandwidth (Aircoookie has) -DPIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH ; VTABLES in Flash -DVTABLES_IN_FLASH ; restrict to minimal mime-types -DMIMETYPE_MINIMAL ; other special-purpose framework flags (see https://docs.platformio.org/en/latest/platforms/espressif8266.html) ; decrease code cache size and increase IRAM to fit all pixel functions -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48 ;; in case of linker errors like "section `.text1' will not fit in region `iram1_0_seg'" ; -D PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED ;; (experimental) adds some extra heap, but may cause slowdown lib_deps = #https://github.com/lorol/LITTLEFS.git ESPAsyncTCP @ 1.2.2 ESPAsyncUDP ${env.lib_deps} [esp32] #platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip platform = espressif32@3.5.0 platform_packages = framework-arduinoespressif32 @ https://github.com/Aircoookie/arduino-esp32.git#1.0.6.4 build_flags = -g -DARDUINO_ARCH_ESP32 #-DCONFIG_LITTLEFS_FOR_IDF_3_2 -D CONFIG_ASYNC_TCP_USE_WDT=0 #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x -D LOROL_LITTLEFS ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3 tiny_partitions = tools/WLED_ESP32_2MB_noOTA.csv default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv extended_partitions = tools/WLED_ESP32_4MB_700k_FS.csv big_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv ;; 1.8MB firmware, 256KB filesystem, coredump support large_partitions = tools/WLED_ESP32_8MB.csv extreme_partitions = tools/WLED_ESP32_16MB_9MB_FS.csv lib_deps = https://github.com/lorol/LITTLEFS.git https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} # additional build flags for audioreactive AR_build_flags = -D USERMOD_AUDIOREACTIVE AR_lib_deps = kosme/arduinoFFT @ 2.0.1 [esp32_idf_V4] ;; experimental build environment for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5 ;; very similar to the normal ESP32 flags, but omitting Lorol LittleFS, as littlefs is included in the new framework already. ;; ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly. ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio. platform = espressif32@ ~6.3.2 platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0 ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them) build_flags = -g -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one -DARDUINO_ARCH_ESP32 -DESP32 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3 lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} [esp32s2] ;; generic definitions for all ESP32-S2 boards platform = espressif32@ ~6.3.2 platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0 ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them) build_flags = -g -DARDUINO_ARCH_ESP32 -DARDUINO_ARCH_ESP32S2 -DCONFIG_IDF_TARGET_ESP32S2=1 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 -DCO -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 ! ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry: ;; ARDUINO_USB_CDC_ON_BOOT lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} [esp32c3] ;; generic definitions for all ESP32-C3 boards platform = espressif32@ ~6.3.2 platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0 ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them) build_flags = -g -DARDUINO_ARCH_ESP32 -DARDUINO_ARCH_ESP32C3 -DCONFIG_IDF_TARGET_ESP32C3=1 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DCO -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3 ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry: ;; ARDUINO_USB_CDC_ON_BOOT lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} [esp32s3] ;; generic definitions for all ESP32-S3 boards platform = espressif32@ ~6.3.2 platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0 ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them) build_flags = -g -DESP32 -DARDUINO_ARCH_ESP32 -DARDUINO_ARCH_ESP32S3 -DCONFIG_IDF_TARGET_ESP32S3=1 -D CONFIG_ASYNC_TCP_USE_WDT=0 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0 -DCO ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry: ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT lib_deps = https://github.com/pbolduc/AsyncTCP.git @ 1.2.0 ${env.lib_deps} # ------------------------------------------------------------------------------ # WLED BUILDS # ------------------------------------------------------------------------------ [env:nodemcuv2] board = nodemcuv2 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_4m1m} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D lib_deps = ${esp8266.lib_deps} monitor_filters = esp8266_exception_decoder [env:nodemcuv2_160] extends = env:nodemcuv2 board_build.f_cpu = 160000000L build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP8266_160 #-DWLED_DISABLE_2D [env:esp8266_2m] board = esp_wroom_02 platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_2m512k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP02 lib_deps = ${esp8266.lib_deps} [env:esp8266_2m_160] extends = env:esp8266_2m board_build.f_cpu = 160000000L build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP02_160 [env:esp01_1m_full] board = esp01_1m platform = ${common.platform_wled_default} platform_packages = ${common.platform_packages} board_build.ldscript = ${common.ldscript_1m128k} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA ; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM lib_deps = ${esp8266.lib_deps} [env:esp01_1m_full_160] extends = env:esp01_1m_full board_build.f_cpu = 160000000L build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP01_160 -D WLED_DISABLE_OTA ; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM [env:esp32dev] board = esp32dev platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET lib_deps = ${esp32.lib_deps} monitor_filters = esp32_exception_decoder board_build.partitions = ${esp32.default_partitions} [env:esp32dev_8M] board = esp32dev platform = ${esp32_idf_V4.platform} platform_packages = ${esp32_idf_V4.platform_packages} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_8M #-D WLED_DISABLE_BROWNOUT_DET ${esp32.AR_build_flags} lib_deps = ${esp32_idf_V4.lib_deps} ${esp32.AR_lib_deps} monitor_filters = esp32_exception_decoder board_build.partitions = ${esp32.large_partitions} ; board_build.f_flash = 80000000L [env:esp32dev_audioreactive] board = esp32dev platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32_audioreactive #-D WLED_DISABLE_BROWNOUT_DET ${esp32.AR_build_flags} lib_deps = ${esp32.lib_deps} ${esp32.AR_lib_deps} monitor_filters = esp32_exception_decoder board_build.partitions = ${esp32.default_partitions} ; board_build.f_flash = 80000000L ; board_build.flash_mode = dio [env:esp32_eth] board = esp32-poe platform = ${esp32.platform} platform_packages = ${esp32.platform_packages} upload_speed = 921600 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1 -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only lib_deps = ${esp32.lib_deps} board_build.partitions = ${esp32.default_partitions} [env:esp32_wrover] extends = esp32_idf_V4 platform = ${esp32_idf_V4.platform} platform_packages = ${esp32_idf_V4.platform_packages} board = ttgo-t7-v14-mini32 board_build.f_flash = 80000000L board_build.flash_mode = qio board_build.partitions = ${esp32.default_partitions} build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_WROVER -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html -D LEDPIN=25 ; ${esp32.AR_build_flags} lib_deps = ${esp32_idf_V4.lib_deps} ; ${esp32.AR_lib_deps} [env:esp32c3dev] extends = esp32c3 platform = ${esp32c3.platform} platform_packages = ${esp32c3.platform_packages} framework = arduino board = esp32-c3-devkitm-1 board_build.partitions = ${esp32.default_partitions} build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=ESP32-C3 -D WLED_WATCHDOG_TIMEOUT=0 -DLOLIN_WIFI_FIX ; seems to work much better with this -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB ;-DARDUINO_USB_CDC_ON_BOOT=0 ;; for serial-to-USB chip upload_speed = 460800 build_unflags = ${common.build_unflags} lib_deps = ${esp32c3.lib_deps} [env:esp32s3dev_16MB_opi] ;; ESP32-S3 development board, with 16MB FLASH and >= 8MB PSRAM (memory_type: qio_opi) board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support board_build.arduino.memory_type = qio_opi ;; use with PSRAM: 8MB or 16MB platform = ${esp32s3.platform} platform_packages = ${esp32s3.platform_packages} upload_speed = 921600 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_16MB_opi -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0 ;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB") -DBOARD_HAS_PSRAM ${esp32.AR_build_flags} lib_deps = ${esp32s3.lib_deps} ${esp32.AR_lib_deps} board_build.partitions = ${esp32.extreme_partitions} board_build.f_flash = 80000000L board_build.flash_mode = qio monitor_filters = esp32_exception_decoder [env:esp32s3dev_8MB_opi] ;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi) board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support board_build.arduino.memory_type = qio_opi ;; use with PSRAM: 8MB or 16MB platform = ${esp32s3.platform} platform_packages = ${esp32s3.platform_packages} upload_speed = 921600 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB_opi -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0 ;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB") -DBOARD_HAS_PSRAM ${esp32.AR_build_flags} lib_deps = ${esp32s3.lib_deps} ${esp32.AR_lib_deps} board_build.partitions = ${esp32.large_partitions} board_build.f_flash = 80000000L board_build.flash_mode = qio monitor_filters = esp32_exception_decoder [env:esp32s3_4M_qspi] ;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi) board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB platform = ${esp32s3.platform} platform_packages = ${esp32s3.platform_packages} upload_speed = 921600 build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_4M_qspi -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB") -DBOARD_HAS_PSRAM -D WLED_WATCHDOG_TIMEOUT=0 ${esp32.AR_build_flags} lib_deps = ${esp32s3.lib_deps} ${esp32.AR_lib_deps} board_build.partitions = ${esp32.default_partitions} board_build.f_flash = 80000000L board_build.flash_mode = qio monitor_filters = esp32_exception_decoder [env:lolin_s2_mini] platform = ${esp32s2.platform} platform_packages = ${esp32s2.platform_packages} board = lolin_s2_mini board_build.partitions = ${esp32.default_partitions} board_build.flash_mode = qio board_build.f_flash = 80000000L build_unflags = ${common.build_unflags} build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=ESP32-S2 -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0 -DBOARD_HAS_PSRAM -DLOLIN_WIFI_FIX ; seems to work much better with this -D WLED_WATCHDOG_TIMEOUT=0 -D CONFIG_ASYNC_TCP_USE_WDT=0 -D LEDPIN=16 -D HW_PIN_SCL=35 -D HW_PIN_SDA=33 -D HW_PIN_CLOCKSPI=7 -D HW_PIN_DATASPI=11 -D HW_PIN_MISOSPI=9 ; -D STATUSLED=15 ${esp32.AR_build_flags} lib_deps = ${esp32s2.lib_deps} ${esp32.AR_lib_deps}