Merge pull request #3920 from Suxsem/relay-3-states

Relay open drain output (allow esp32 to drive 5v relay modules)
"X" span near to the number input field
2024-04-26 07:06:03 +02:00 · 2024-04-26 00:29:48 +02:00 · 2024-04-24 16:04:54 +02:00 · 2024-04-23 19:05:49 +02:00 · 2024-04-23 18:55:36 +02:00 · 2024-04-23 15:56:08 +02:00
--- a/platformio.ini
+++ b/platformio.ini
@ -10,7 +10,7 @@
 # ------------------------------------------------------------------------------

 # CI/release binaries
-default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB, esp32s3dev_8MB_PSRAM_opi, esp32s3_4M_PSRAM_qspi, esp32_wrover
+default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, nodemcuv2_160, esp8266_2m_160, esp01_1m_full_160, esp32dev, esp32_eth, esp32dev_audioreactive, lolin_s2_mini, esp32c3dev, esp32s3dev_16MB_opi, esp32s3dev_8MB_opi, esp32s3_4M_qspi, esp32_wrover

 src_dir  = ./wled00
 data_dir = ./wled00/data
@ -86,7 +86,6 @@ debug_flags = -D DEBUG=1 -D WLED_DEBUG
 #  This reduces the OTA size with ~45KB, so it's especially useful on low memory boards (512k/1m).
 # ------------------------------------------------------------------------------
 build_flags =
-  -Wno-attributes
  -DMQTT_MAX_PACKET_SIZE=1024
  -DSECURE_CLIENT=SECURE_CLIENT_BEARSSL
  -DBEARSSL_SSL_BASIC
@ -104,10 +103,6 @@ build_flags =

 build_unflags =

-build_flags_esp8266 = ${common.build_flags}  ${esp8266.build_flags}
-build_flags_esp32   = ${common.build_flags}  ${esp32.build_flags}
-build_flags_esp32_V4= ${common.build_flags}  ${esp32_idf_V4.build_flags}
-
 ldscript_1m128k = eagle.flash.1m128.ld
 ldscript_2m512k = eagle.flash.2m512.ld
 ldscript_2m1m = eagle.flash.2m1m.ld
@ -218,7 +213,12 @@ build_flags = -g
  #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
  -D LOROL_LITTLEFS
  ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
+tiny_partitions = tools/WLED_ESP32_2MB_noOTA.csv
 default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+extended_partitions = tools/WLED_ESP32_4MB_700k_FS.csv
+big_partitions = tools/WLED_ESP32_4MB_256KB_FS.csv     ;; 1.8MB firmware, 256KB filesystem, coredump support
+large_partitions = tools/WLED_ESP32_8MB.csv
+extreme_partitions = tools/WLED_ESP32_16MB_9MB_FS.csv
 lib_deps =
  https://github.com/lorol/LITTLEFS.git
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
@ -233,23 +233,21 @@ AR_lib_deps = kosme/arduinoFFT @ 2.0.1
 ;;
 ;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
 ;; You need to completely erase your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
-platform = espressif32@5.3.0
-platform_packages =
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
  -Wshadow=compatible-local ;; emit warning in case a local variable "shadows" another local one
  -DARDUINO_ARCH_ESP32 -DESP32
  -D CONFIG_ASYNC_TCP_USE_WDT=0
  -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when building with arduino-esp32 >=2.0.3
-default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 lib_deps =
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
  ${env.lib_deps}

 [esp32s2]
 ;; generic definitions for all ESP32-S2 boards
-platform = espressif32@5.3.0
-platform_packages =
-default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32S2
@ -266,8 +264,8 @@ lib_deps =

 [esp32c3]
 ;; generic definitions for all ESP32-C3 boards
-platform = espressif32@5.3.0
-platform_packages =
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
  -DARDUINO_ARCH_ESP32
  -DARDUINO_ARCH_ESP32C3
@ -283,8 +281,8 @@ lib_deps =

 [esp32s3]
 ;; generic definitions for all ESP32-S3 boards
-platform = espressif32@5.3.0
-platform_packages =
+platform = espressif32@ ~6.3.2
+platform_packages = platformio/framework-arduinoespressif32 @ 3.20009.0    ;; select arduino-esp32 v2.0.9 (arduino-esp32 2.0.10 thru 2.0.14 are buggy so avoid them)
 build_flags = -g
  -DESP32
  -DARDUINO_ARCH_ESP32
@ -295,7 +293,6 @@ build_flags = -g
  -DCO
  ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
  ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
-
 lib_deps =
  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
  ${env.lib_deps}
@ -311,14 +308,14 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP8266 #-DWLED_DISABLE_2D
 lib_deps = ${esp8266.lib_deps}
 monitor_filters = esp8266_exception_decoder

 [env:nodemcuv2_160]
 extends = env:nodemcuv2
 board_build.f_cpu = 160000000L
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266_160 #-DWLED_DISABLE_2D
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP8266_160 #-DWLED_DISABLE_2D

 [env:esp8266_2m]
 board = esp_wroom_02
@ -326,13 +323,13 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP02
 lib_deps = ${esp8266.lib_deps}

 [env:esp8266_2m_160]
 extends = env:esp8266_2m
 board_build.f_cpu = 160000000L
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP02_160
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP02_160

 [env:esp01_1m_full]
 board = esp01_1m
@ -340,14 +337,14 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_1m128k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA
  ; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM
 lib_deps = ${esp8266.lib_deps}

 [env:esp01_1m_full_160]
 extends = env:esp01_1m_full
 board_build.f_cpu = 160000000L
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01_160 -D WLED_DISABLE_OTA
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_RELEASE_NAME=ESP01_160 -D WLED_DISABLE_OTA
  ; -D WLED_USE_UNREAL_MATH ;; may cause wrong sunset/sunrise times, but saves 7064 bytes FLASH and 975 bytes RAM

 [env:esp32dev]
@ -355,17 +352,30 @@ board = esp32dev
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32 #-D WLED_DISABLE_BROWNOUT_DET
 lib_deps = ${esp32.lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.default_partitions}

+[env:esp32dev_8M]
+board = esp32dev
+platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_8M #-D WLED_DISABLE_BROWNOUT_DET
+  ${esp32.AR_build_flags}
+lib_deps = ${esp32_idf_V4.lib_deps}
+  ${esp32.AR_lib_deps}
+monitor_filters = esp32_exception_decoder
+board_build.partitions = ${esp32.large_partitions}
+; board_build.f_flash = 80000000L
+
 [env:esp32dev_audioreactive]
 board = esp32dev
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_audioreactive #-D WLED_DISABLE_BROWNOUT_DET
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32_audioreactive #-D WLED_DISABLE_BROWNOUT_DET
  ${esp32.AR_build_flags}
 lib_deps = ${esp32.lib_deps}
  ${esp32.AR_lib_deps}
@ -380,22 +390,26 @@ platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_RELEASE_NAME=ESP32_Ethernet -D RLYPIN=-1 -D WLED_USE_ETHERNET -D BTNPIN=-1
  -D WLED_DISABLE_ESPNOW ;; ESP-NOW requires wifi, may crash with ethernet only
 lib_deps = ${esp32.lib_deps}
 board_build.partitions = ${esp32.default_partitions}

 [env:esp32_wrover]
-platform = ${esp32.platform}
+extends = esp32_idf_V4
+platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
 board = ttgo-t7-v14-mini32
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
-board_build.partitions = tools/WLED_ESP32-wrover_4MB.csv
+board_build.partitions = ${esp32.default_partitions}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_WROVER
+build_flags = ${common.build_flags} ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_WROVER
  -DBOARD_HAS_PSRAM -mfix-esp32-psram-cache-issue ;; Older ESP32 (rev.<3) need a PSRAM fix (increases static RAM used) https://docs.espressif.com/projects/esp-idf/en/stable/esp32/api-guides/external-ram.html
  -D LEDPIN=25
-lib_deps = ${esp32.lib_deps}
+  ; ${esp32.AR_build_flags}
+lib_deps = ${esp32_idf_V4.lib_deps}
+  ; ${esp32.AR_lib_deps}

 [env:esp32c3dev]
 extends = esp32c3
@ -403,7 +417,7 @@ platform = ${esp32c3.platform}
 platform_packages = ${esp32c3.platform_packages}
 framework = arduino
 board = esp32-c3-devkitm-1
-board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+board_build.partitions = ${esp32.default_partitions}
 build_flags = ${common.build_flags} ${esp32c3.build_flags} -D WLED_RELEASE_NAME=ESP32-C3
  -D WLED_WATCHDOG_TIMEOUT=0
  -DLOLIN_WIFI_FIX ; seems to work much better with this
@ -413,35 +427,15 @@ upload_speed = 460800
 build_unflags = ${common.build_unflags}
 lib_deps = ${esp32c3.lib_deps}

-[env:esp32s3dev_8MB]
-;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
-board = esp32-s3-devkitc-1
-platform = ${esp32s3.platform}
-platform_packages = ${esp32s3.platform_packages}
-upload_speed = 921600 ; or  460800
-build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB
-  -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-  -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-  ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=1 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
-  ${esp32.AR_build_flags}
-lib_deps = ${esp32s3.lib_deps}
-  ${esp32.AR_lib_deps}
-board_build.partitions = tools/WLED_ESP32_8MB.csv
-board_build.f_flash = 80000000L
-board_build.flash_mode = qio
-; board_build.flash_mode = dio   ;; try this if you have problems at startup
-monitor_filters = esp32_exception_decoder
-
-[env:esp32s3dev_8MB_PSRAM_opi]
-;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
+[env:esp32s3dev_16MB_opi]
+;; ESP32-S3 development board, with 16MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
 platform = ${esp32s3.platform}
 platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB_PSRAM_opi
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_16MB_opi
  -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
  -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
@ -449,12 +443,33 @@ build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=
  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
  ${esp32.AR_lib_deps}
-board_build.partitions = tools/WLED_ESP32_8MB.csv
+board_build.partitions = ${esp32.extreme_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 monitor_filters = esp32_exception_decoder

-[env:esp32s3_4M_PSRAM_qspi]
+[env:esp32s3dev_8MB_opi]
+;; ESP32-S3 development board, with 8MB FLASH and >= 8MB PSRAM (memory_type: qio_opi)
+board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
+board_build.arduino.memory_type = qio_opi     ;; use with PSRAM: 8MB or 16MB
+platform = ${esp32s3.platform}
+platform_packages = ${esp32s3.platform_packages}
+upload_speed = 921600
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_8MB_opi
+  -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
+  ;-D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
+  -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  -DBOARD_HAS_PSRAM
+  ${esp32.AR_build_flags}
+lib_deps = ${esp32s3.lib_deps}
+  ${esp32.AR_lib_deps}
+board_build.partitions = ${esp32.large_partitions}
+board_build.f_flash = 80000000L
+board_build.flash_mode = qio
+monitor_filters = esp32_exception_decoder
+
+[env:esp32s3_4M_qspi]
 ;; ESP32-S3, with 4MB FLASH and <= 4MB PSRAM (memory_type: qio_qspi)
 board = esp32-s3-devkitc-1 ;; generic dev board; the next line adds PSRAM support
 board_build.arduino.memory_type = qio_qspi ;; use with PSRAM: 2MB or 4MB
@ -462,14 +477,14 @@ platform = ${esp32s3.platform}
 platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_4M_PSRAM_qspi
+build_flags = ${common.build_flags} ${esp32s3.build_flags} -D WLED_RELEASE_NAME=ESP32-S3_4M_qspi
  -DARDUINO_USB_CDC_ON_BOOT=1 -DARDUINO_USB_MODE=1      ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
  -DBOARD_HAS_PSRAM
  -D WLED_WATCHDOG_TIMEOUT=0
  ${esp32.AR_build_flags}
 lib_deps = ${esp32s3.lib_deps}
  ${esp32.AR_lib_deps}
-board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+board_build.partitions = ${esp32.default_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 monitor_filters = esp32_exception_decoder
@ -478,9 +493,9 @@ monitor_filters = esp32_exception_decoder
 platform = ${esp32s2.platform}
 platform_packages = ${esp32s2.platform_packages}
 board = lolin_s2_mini
-board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
-;board_build.flash_mode = qio
-;board_build.f_flash = 80000000L
+board_build.partitions = ${esp32.default_partitions}
+board_build.flash_mode = qio
+board_build.f_flash = 80000000L
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s2.build_flags} -D WLED_RELEASE_NAME=ESP32-S2
  -DARDUINO_USB_CDC_ON_BOOT=1
--- a/platformio_override.sample.ini
+++ b/platformio_override.sample.ini
@ -28,12 +28,15 @@ lib_deps = ${esp8266.lib_deps}
 ;  robtillaart/SHT85@~0.3.3
 ;  gmag11/QuickESPNow ;@ 0.6.2
 ;  https://github.com/blazoncek/QuickESPNow.git#optional-debug  ;; exludes debug library
-;  https://github.com/kosme/arduinoFFT#develop @ 1.9.2+sha.419d7b0 ;; used for USERMOD_AUDIOREACTIVE - using "known working" hash
-; build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
+;  https://github.com/kosme/arduinoFFT#develop @ 2.0.1 ;; used for USERMOD_AUDIOREACTIVE
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
 ;
 ; *** To use the below defines/overrides, copy and paste each onto it's own line just below build_flags in the section above.
 ; 
+; Set a release name that may be used to distinguish required binary for flashing
+;   -D WLED_RELEASE_NAME=ESP32_MULTI_USREMODS
+;
 ; disable specific features
 ;   -D WLED_DISABLE_OTA
 ;   -D WLED_DISABLE_ALEXA
@ -56,6 +59,7 @@ build_flags = ${common.build_flags_esp8266}
 ;   -D IRPIN=4
 ;   -D RLYPIN=12
 ;   -D RLYMDE=1
+;   -D RLYODRAIN=0
 ;   -D LED_BUILTIN=2 # GPIO of built-in LED
 ;
 ; Limit max buses
@ -179,7 +183,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
 lib_deps = ${esp8266.lib_deps}

 [env:d1_mini]
@ -189,7 +193,7 @@ platform_packages = ${common.platform_packages}
 upload_speed = 921600
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
 lib_deps = ${esp8266.lib_deps}
 monitor_filters = esp8266_exception_decoder

@ -199,7 +203,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
 lib_deps = ${esp8266.lib_deps}

 [env:h803wf]
@ -208,7 +212,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=1 -D WLED_DISABLE_INFRARED
 lib_deps = ${esp8266.lib_deps}

 [env:esp32dev_qio80]
@ -216,7 +220,7 @@ board = esp32dev
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32_qio80 #-D WLED_DISABLE_BROWNOUT_DET
+build_flags = ${common.build_flags} ${esp32.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
 lib_deps = ${esp32.lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32.default_partitions}
@ -231,7 +235,7 @@ board = esp32dev
 platform = ${esp32_idf_V4.platform}
 platform_packages = ${esp32_idf_V4.platform_packages}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
+build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} #-D WLED_DISABLE_BROWNOUT_DET
 lib_deps = ${esp32_idf_V4.lib_deps}
 monitor_filters = esp32_exception_decoder
 board_build.partitions = ${esp32_idf_V4.default_partitions}
@ -240,14 +244,14 @@ board_build.flash_mode = dio

 [env:esp32s2_saola]
 board = esp32-s2-saola-1
-platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.2/platform-tasmota-espressif32-2.0.2.zip
-platform_packages =
+platform = ${esp32s2.platform}
+platform_packages = ${esp32s2.platform_packages}
 framework = arduino
 board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 board_build.flash_mode = qio
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
+build_flags = ${common.build_flags} ${esp32s2.build_flags}
  ;-DLOLIN_WIFI_FIX ;; try this in case Wifi does not work
  -DARDUINO_USB_CDC_ON_BOOT=1
 lib_deps = ${esp32s2.lib_deps}
@ -265,7 +269,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_1m128k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA
 lib_deps = ${esp8266.lib_deps}

 [env:esp8285_H801]
@ -274,7 +278,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_1m128k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_OTA
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA
 lib_deps = ${esp8266.lib_deps}

 [env:d1_mini_5CH_Shojo_PCB]
@ -283,7 +287,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_USE_SHOJO_PCB
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_USE_SHOJO_PCB
 lib_deps = ${esp8266.lib_deps}

 [env:d1_mini_debug]
@ -293,7 +297,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} ${common.debug_flags}
+build_flags = ${common.build_flags} ${esp8266.build_flags} ${common.debug_flags}
 lib_deps = ${esp8266.lib_deps}

 [env:d1_mini_ota]
@ -305,7 +309,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
 lib_deps = ${esp8266.lib_deps}

 [env:anavi_miracle_controller]
@ -314,7 +318,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
 lib_deps = ${esp8266.lib_deps}

 [env:esp32c3dev_2MB]
@ -324,7 +328,7 @@ extends = esp32c3
 platform = ${esp32c3.platform}
 platform_packages = ${esp32c3.platform_packages}
 board = esp32-c3-devkitm-1
-build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
+build_flags = ${common.build_flags} ${esp32c3.build_flags}
  -D WLED_WATCHDOG_TIMEOUT=0
  -D WLED_DISABLE_OTA
  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
@ -341,7 +345,7 @@ platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32}
+build_flags = ${common.build_flags} ${esp32.build_flags}
  -D LEDPIN=16
  -D RLYPIN=19
  -D BTNPIN=17
@ -361,7 +365,7 @@ board_build.partitions = ${esp32.default_partitions}
 [env:m5atom]
 board = esp32dev
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp32} -D LEDPIN=27 -D BTNPIN=39
+build_flags = ${common.build_flags} ${esp32.build_flags} -D LEDPIN=27 -D BTNPIN=39
 lib_deps = ${esp32.lib_deps}
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
@ -371,14 +375,14 @@ board_build.partitions = ${esp32.default_partitions}
 board = esp_wroom_02
 platform = ${common.platform_wled_default}
 board_build.ldscript = ${common.ldscript_2m512k}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=1
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=3 -D BTNPIN=1
 lib_deps = ${esp8266.lib_deps}

 [env:sp511e]
 board = esp_wroom_02
 platform = ${common.platform_wled_default}
 board_build.ldscript = ${common.ldscript_2m512k}
-build_flags = ${common.build_flags_esp8266} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D LEDPIN=3 -D BTNPIN=2 -D IRPIN=5 -D WLED_MAX_BUTTONS=3
 lib_deps = ${esp8266.lib_deps}

 [env:Athom_RGBCW]        ;7w and 5w(GU10) bulbs
@ -387,7 +391,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,13,5
                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0
 lib_deps = ${esp8266.lib_deps}

@ -397,7 +401,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=-1 -D RLYPIN=-1 -D DATA_PINS=4,12,14,5,13
                                            -D DEFAULT_LED_TYPE=TYPE_ANALOG_5CH -D WLED_DISABLE_INFRARED -D WLED_MAX_CCT_BLEND=0 -D WLED_USE_IC_CCT
 lib_deps = ${esp8266.lib_deps}

@ -407,7 +411,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=-1 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
 lib_deps = ${esp8266.lib_deps}

 [env:Athom_4Pin_Controller]       ; With clock and data interface
@ -416,7 +420,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=12 -D LEDPIN=1 -D WLED_DISABLE_INFRARED
 lib_deps = ${esp8266.lib_deps}

 [env:Athom_5Pin_Controller]      ;Analog light strip controller
@ -425,7 +429,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP8266 -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D BTNPIN=0 -D RLYPIN=-1 DATA_PINS=4,12,14,13 -D WLED_DISABLE_INFRARED
 lib_deps = ${esp8266.lib_deps}

 [env:MY9291]
@ -434,7 +438,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_1m128k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266} -D WLED_RELEASE_NAME=ESP01 -D WLED_DISABLE_OTA -D USERMOD_MY9291
+build_flags = ${common.build_flags} ${esp8266.build_flags} -D WLED_DISABLE_OTA -D USERMOD_MY9291
 lib_deps = ${esp8266.lib_deps}

 # ------------------------------------------------------------------------------
@ -448,7 +452,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_2m512k}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
 lib_deps = ${esp8266.lib_deps}

 [env:codm-controller-0_6-rev2]
@ -457,7 +461,7 @@ platform = ${common.platform_wled_default}
 platform_packages = ${common.platform_packages}
 board_build.ldscript = ${common.ldscript_4m1m}
 build_unflags = ${common.build_unflags}
-build_flags = ${common.build_flags_esp8266}
+build_flags = ${common.build_flags} ${esp8266.build_flags}
 lib_deps = ${esp8266.lib_deps}

 # ------------------------------------------------------------------------------
@ -468,7 +472,7 @@ board = esp32dev
 platform = ${esp32.platform}
 platform_packages = ${esp32.platform_packages}
 upload_speed = 921600
-build_flags = ${common.build_flags_esp32} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
+build_flags = ${common.build_flags} ${esp32.build_flags} -D WLED_DISABLE_BROWNOUT_DET -D WLED_DISABLE_INFRARED
  -D USERMOD_RTC
  -D USERMOD_ELEKSTUBE_IPS
  -D LEDPIN=12
--- a/tools/WLED_ESP32_4MB_256KB_FS.csv
+++ b/tools/WLED_ESP32_4MB_256KB_FS.csv
@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x1D0000,
+app1,     app,  ota_1,   0x1E0000,0x1D0000,
+spiffs,   data, spiffs,  0x3B0000,0x40000,
+coredump, data, coredump,,64K
--- a/tools/WLED_ESP32_4MB_700k_FS.csv
+++ b/tools/WLED_ESP32_4MB_700k_FS.csv
@ -0,0 +1,6 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x1A0000,
+app1,     app,  ota_1,   0x1B0000,0x1A0000,
+spiffs,   data, spiffs,  0x350000,0xB0000,
--- a/usermods/BH1750_v2/usermod_bh1750.h
+++ b/usermods/BH1750_v2/usermod_bh1750.h
@ -59,7 +59,7 @@ private:
  bool sensorFound = false;

  // Home Assistant and MQTT  
-  String mqttLuminanceTopic = F("");
+  String mqttLuminanceTopic;
  bool mqttInitialized = false;
  bool HomeAssistantDiscovery = true; // Publish Home Assistant Discovery messages

--- a/usermods/audioreactive/audio_source.h
+++ b/usermods/audioreactive/audio_source.h
@ -71,7 +71,7 @@
 * if you want to receive two channels, one is the actual data from microphone and another channel is suppose to receive 0, it's different data in two channels, you need to choose I2S_CHANNEL_FMT_RIGHT_LEFT in this case.
 */

-#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)) && (ESP_IDF_VERSION <= ESP_IDF_VERSION_VAL(4, 4, 4))
+#if (ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4, 4, 0)) && (ESP_IDF_VERSION <= ESP_IDF_VERSION_VAL(4, 4, 6))
 // espressif bug: only_left has no sound, left and right are swapped 
 // https://github.com/espressif/esp-idf/issues/9635  I2S mic not working since 4.4 (IDFGH-8138)
 // https://github.com/espressif/esp-idf/issues/8538  I2S channel selection issue? (IDFGH-6918)
@ -770,4 +770,4 @@ class SPH0654 : public I2SSource {
 #endif
    }
 };
-#endif
+#endif
--- a/usermods/usermod_v2_four_line_display_ALT/usermod_v2_four_line_display_ALT.h
+++ b/usermods/usermod_v2_four_line_display_ALT/usermod_v2_four_line_display_ALT.h
@ -1135,10 +1135,12 @@ bool FourLineDisplayUsermod::handleButton(uint8_t b) {
  return handled;
 }

-#if CONFIG_FREERTOS_UNICORE
-#define ARDUINO_RUNNING_CORE 0
-#else
-#define ARDUINO_RUNNING_CORE 1
+#ifndef ARDUINO_RUNNING_CORE
+  #if CONFIG_FREERTOS_UNICORE
+    #define ARDUINO_RUNNING_CORE 0
+  #else
+    #define ARDUINO_RUNNING_CORE 1
+  #endif
 #endif
 void FourLineDisplayUsermod::onUpdateBegin(bool init) {
 #if defined(ARDUINO_ARCH_ESP32) && defined(FLD_ESP32_USE_THREADS)
--- a/wled00/FX_2Dfcn.cpp
+++ b/wled00/FX_2Dfcn.cpp
@ -286,7 +286,7 @@ void Segment::blurRow(uint32_t row, fract8 blur_amount, bool smear){
  uint32_t carryover = BLACK;
  uint32_t lastnew;
  uint32_t last;
-  uint32_t curnew;
+  uint32_t curnew = BLACK;
  for (unsigned x = 0; x < cols; x++) {
    uint32_t cur = getPixelColorXY(x, row);
    uint32_t part = color_fade(cur, seep);
@ -297,8 +297,7 @@ void Segment::blurRow(uint32_t row, fract8 blur_amount, bool smear){
      uint32_t prev = color_add(lastnew, part, true);
      if (last != prev) // optimization: only set pixel if color has changed
        setPixelColorXY(x - 1, row, prev);
-    }
-    else // first pixel
+    } else // first pixel
      setPixelColorXY(x, row, curnew);
    lastnew = curnew;
    last = cur; // save original value for comparison on next iteration
@ -320,7 +319,7 @@ void Segment::blurCol(uint32_t col, fract8 blur_amount, bool smear) {
  uint32_t carryover = BLACK;
  uint32_t lastnew;
  uint32_t last;
-  uint32_t curnew;
+  uint32_t curnew = BLACK;
  for (unsigned y = 0; y < rows; y++) {
    uint32_t cur = getPixelColorXY(col, y);
    uint32_t part = color_fade(cur, seep);
@ -331,8 +330,7 @@ void Segment::blurCol(uint32_t col, fract8 blur_amount, bool smear) {
      uint32_t prev = color_add(lastnew, part, true);      
      if (last != prev) // optimization: only set pixel if color has changed
        setPixelColorXY(col, y - 1, prev);
-    }
-    else // first pixel
+    } else // first pixel
      setPixelColorXY(col, y, curnew);
    lastnew = curnew;
    last = cur; //save original value for comparison on next iteration
--- a/wled00/FX_fcn.cpp
+++ b/wled00/FX_fcn.cpp
@ -1009,7 +1009,7 @@ void Segment::blur(uint8_t blur_amount, bool smear) {
  uint32_t carryover = BLACK;
  uint32_t lastnew;
  uint32_t last;
-  uint32_t curnew;
+  uint32_t curnew = BLACK;
  for (unsigned i = 0; i < vlength; i++) {
    uint32_t cur = getPixelColor(i);
    uint32_t part = color_fade(cur, seep);
@ -1099,21 +1099,24 @@ void WS2812FX::finalizeInit(void) {
  //if busses failed to load, add default (fresh install, FS issue, ...)
  if (BusManager::getNumBusses() == 0) {
    DEBUG_PRINTLN(F("No busses, init default"));
-    const uint8_t defDataPins[] = {DATA_PINS};
-    const uint16_t defCounts[] = {PIXEL_COUNTS};
-    const uint8_t defNumBusses = ((sizeof defDataPins) / (sizeof defDataPins[0]));
-    const uint8_t defNumCounts = ((sizeof defCounts)   / (sizeof defCounts[0]));
-    uint16_t prevLen = 0;
-    for (int i = 0; i < defNumBusses && i < WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES; i++) {
-      uint8_t defPin[] = {defDataPins[i]};
+    const unsigned defDataPins[] = {DATA_PINS};
+    const unsigned defCounts[] = {PIXEL_COUNTS};
+    const unsigned defNumPins = ((sizeof defDataPins) / (sizeof defDataPins[0]));
+    const unsigned defNumCounts = ((sizeof defCounts)   / (sizeof defCounts[0]));
+    const unsigned defNumBusses = defNumPins > defNumCounts && defNumCounts > 1 && defNumPins%defNumCounts == 0 ? defNumCounts : defNumPins;
+    const unsigned pinsPerBus = defNumPins / defNumBusses;
+    unsigned prevLen = 0;
+    for (unsigned i = 0; i < defNumBusses && i < WLED_MAX_BUSSES+WLED_MIN_VIRTUAL_BUSSES; i++) {
+      uint8_t defPin[5]; // max 5 pins
+      for (unsigned j = 0; j < pinsPerBus; j++) defPin[j] = defDataPins[i*pinsPerBus + j];
      // when booting without config (1st boot) we need to make sure GPIOs defined for LED output don't clash with hardware
      // i.e. DEBUG (GPIO1), DMX (2), SPI RAM/FLASH (16&17 on ESP32-WROVER/PICO), etc
      if (pinManager.isPinAllocated(defPin[0])) {
        defPin[0] = 1; // start with GPIO1 and work upwards
        while (pinManager.isPinAllocated(defPin[0]) && defPin[0] < WLED_NUM_PINS) defPin[0]++;
      }
-      uint16_t start = prevLen;
-      uint16_t count = defCounts[(i < defNumCounts) ? i : defNumCounts -1];
+      unsigned start = prevLen;
+      unsigned count = defCounts[(i < defNumCounts) ? i : defNumCounts -1];
      prevLen += count;
      BusConfig defCfg = BusConfig(DEFAULT_LED_TYPE, defPin, start, count, DEFAULT_LED_COLOR_ORDER, false, 0, RGBW_MODE_MANUAL_ONLY);
      if (BusManager::add(defCfg) == -1) break;
@ -1664,12 +1667,18 @@ bool WS2812FX::deserializeMap(uint8_t n) {
    return false; // if file does not load properly then exit
  }

+  JsonObject root = pDoc->as<JsonObject>();
+  // if we are loading default ledmap (at boot) set matrix width and height from the ledmap (compatible with WLED MM ledmaps)
+  if (isMatrix && n == 0 && (!root[F("width")].isNull() || !root[F("height")].isNull())) {
+    Segment::maxWidth  = min(max(root[F("width")].as<int>(), 1), 128);
+    Segment::maxHeight = min(max(root[F("height")].as<int>(), 1), 128);
+  }
+
  if (customMappingTable) delete[] customMappingTable;
  customMappingTable = new uint16_t[getLengthTotal()];

  if (customMappingTable) {
    DEBUG_PRINT(F("Reading LED map from ")); DEBUG_PRINTLN(fileName);
-    JsonObject root = pDoc->as<JsonObject>();
    JsonArray map = root[F("map")];
    if (!map.isNull() && map.size()) {  // not an empty map
      customMappingSize = min((unsigned)map.size(), (unsigned)getLengthTotal());
--- a/wled00/button.cpp
+++ b/wled00/button.cpp
@ -379,7 +379,7 @@ void handleIO()
      esp32RMTInvertIdle();
      #endif
      if (rlyPin>=0) {
-        pinMode(rlyPin, OUTPUT);
+        pinMode(rlyPin, rlyOpenDrain ? OUTPUT_OPEN_DRAIN : OUTPUT);
        digitalWrite(rlyPin, rlyMde);
      }
      offMode = false;
@ -400,7 +400,7 @@ void handleIO()
      esp32RMTInvertIdle();
      #endif
      if (rlyPin>=0) {
-        pinMode(rlyPin, OUTPUT);
+        pinMode(rlyPin, rlyOpenDrain ? OUTPUT_OPEN_DRAIN : OUTPUT);
        digitalWrite(rlyPin, !rlyMde);
      }
    }
--- a/wled00/cfg.cpp
+++ b/wled00/cfg.cpp
@ -335,12 +335,14 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
  CJSON(irApplyToAllSelected, hw["ir"]["sel"]);

  JsonObject relay = hw[F("relay")];
+
+  rlyOpenDrain  = relay[F("odrain")] | rlyOpenDrain;
  int hw_relay_pin = relay["pin"] | -2;
  if (hw_relay_pin > -2) {
    pinManager.deallocatePin(rlyPin, PinOwner::Relay);
    if (pinManager.allocatePin(hw_relay_pin,true, PinOwner::Relay)) {
      rlyPin = hw_relay_pin;
-      pinMode(rlyPin, OUTPUT);
+      pinMode(rlyPin, rlyOpenDrain ? OUTPUT_OPEN_DRAIN : OUTPUT);
    } else {
      rlyPin = -1;
    }
@ -868,6 +870,7 @@ void serializeConfig() {
  JsonObject hw_relay = hw.createNestedObject(F("relay"));
  hw_relay["pin"] = rlyPin;
  hw_relay["rev"] = !rlyMde;
+  hw_relay[F("odrain")] = rlyOpenDrain;

  hw[F("baud")] = serialBaud;

--- a/wled00/data/index.js
+++ b/wled00/data/index.js
@ -430,7 +430,7 @@ function presetError(empty)
 		if (bckstr.length > 10) hasBackup = true;
 	} catch (e) {}

-	var cn = `<div class="pres c" ${empty?'style="padding:8px;margin-top: 16px;"':'onclick="pmtLast=0;loadPresets();" style="cursor:pointer;padding:8px;margin-top: 16px;"'}>`;
+	var cn = `<div class="pres c" style="padding:8px;margin-bottom:8px;${empty?'':'cursor:pointer;'}" ${empty?'':'onclick="pmtLast=0;loadPresets();"'}>`;
 	if (empty)
 		cn += `You have no presets yet!`;
 	else
@ -442,8 +442,8 @@ function presetError(empty)
 			cn += `However, there is backup preset data of a previous installation available.<br>(Saving a preset will hide this and overwrite the backup)`;
 		else
 			cn += `Here is a backup of the last known good state:`;
-		cn += `<textarea id="bck"></textarea><br><button class="btn" onclick="cpBck()">Copy to clipboard</button>`;
-		cn += `<br><button type="button" class="btn" onclick="restore(gId('bck').value)">Restore</button>`;
+		cn += `<textarea id="bck"></textarea><br><button class="btn" style="margin-top:12px;" onclick="cpBck()">Copy to clipboard</button>`;
+		cn += `<br><button type="button" class="btn" style="margin-top:12px;" onclick="restore(gId('bck').value)">Restore</button>`;
 	}
 	cn += `</div>`;
 	gId('pcont').innerHTML = cn;
--- a/wled00/data/settings_leds.htm
+++ b/wled00/data/settings_leds.htm
@ -619,7 +619,8 @@ Swap: <select id="xw${i}" name="XW${i}">
 					}
 					if (c.hw.relay) {
 						d.getElementsByName("RL")[0].value = c.hw.relay.pin;
-						d.getElementsByName("RM")[0].checked = c.hw.relay.inv;
+						d.getElementsByName("RM")[0].checked = c.hw.relay.rev;
+						d.getElementsByName("RO")[0].checked = c.hw.relay.odrain;
 					}
 					UI();
 				}
@ -822,7 +823,7 @@ Swap: <select id="xw${i}" name="XW${i}">
 		Apply IR change to main segment only: <input type="checkbox" name="MSO"><br>
 		<div id="json" style="display:none;">JSON file: <input type="file" name="data" accept=".json"><button type="button" class="sml" onclick="uploadFile('/ir.json')">Upload</button><br></div>
 		<a href="https://kno.wled.ge/interfaces/infrared/" target="_blank">IR info</a><br>
-		Relay GPIO: <input type="number" min="-1" max="48" name="RL" onchange="UI()" class="xs"> Invert <input type="checkbox" name="RM"><span style="cursor: pointer;" onclick="off('RL')">&nbsp;&#x2715;</span><br>
+		Relay GPIO: <input type="number" min="-1" max="48" name="RL" onchange="UI()" class="xs"><span style="cursor: pointer;" onclick="off('RL')">&nbsp;&#x2715;</span> Invert <input type="checkbox" name="RM"> Open drain <input type="checkbox" name="RO"><br>
 		<hr class="sml">
 		<h3>Defaults</h3>
 		Turn LEDs on after power up/reset: <input type="checkbox" name="BO"><br>
--- a/wled00/data/settings_wifi.htm
+++ b/wled00/data/settings_wifi.htm
@ -52,40 +52,42 @@
 				}
 				scanLoops = 0;

-				let cs = d.querySelectorAll("#wifi_entries input[type=text]");
-				for (let input of (cs||[])) {
-					let found = false;
-					let select = cE("select");
-					select.id = input.id;
-					select.name = input.name;
-					select.setAttribute("onchange", "T(this)");
-					preScanSSID = input.value;
+				if (networks.length > 0) {
+					let cs = d.querySelectorAll("#wifi_entries input[type=text]");
+					for (let input of (cs||[])) {
+						let found = false;
+						let select = cE("select");
+						select.id = input.id;
+						select.name = input.name;
+						select.setAttribute("onchange", "T(this)");
+						preScanSSID = input.value;

-					for (let i = 0; i < select.children.length; i++) {
-						select.removeChild(select.children[i]);
-					}
-
-					for (let i = 0; i < networks.length; i++) {
-						const option = cE("option");
-
-						option.setAttribute("value", networks[i].ssid);
-						option.textContent = `${networks[i].ssid} (${networks[i].rssi} dBm)`;
-
-						if (networks[i].ssid === input.value) {
-							option.setAttribute("selected", "selected");
-							found = true;
+						for (let i = 0; i < select.children.length; i++) {
+							select.removeChild(select.children[i]);
 						}

+						for (let i = 0; i < networks.length; i++) {
+							const option = cE("option");
+
+							option.setAttribute("value", networks[i].ssid);
+							option.textContent = `${networks[i].ssid} (${networks[i].rssi} dBm)`;
+
+							if (networks[i].ssid === input.value) {
+								option.setAttribute("selected", "selected");
+								found = true;
+							}
+
+							select.appendChild(option);
+						}
+						const option = cE("option");
+
+						option.setAttribute("value", "!Cs");
+						option.textContent = "Other network...";
 						select.appendChild(option);
+
+						if (input.value === "" || input.value === "Your_Network" || found) input.replaceWith(select);
+						else select.remove(); 
 					}
-					const option = cE("option");
-
-					option.setAttribute("value", "!Cs");
-					option.textContent = "Other network...";
-					select.appendChild(option);
-
-					if (input.value === "" || input.value === "Your_Network" || found) input.replaceWith(select);
-					else select.remove(); 
 				}

 				button.disabled = false;
--- a/wled00/json.cpp
+++ b/wled00/json.cpp
@ -636,6 +636,7 @@ void serializeInfo(JsonObject root)
  root[F("ver")] = versionString;
  root[F("vid")] = VERSION;
  root[F("cn")] = F(WLED_CODENAME);
+  root[F("release")] = FPSTR(releaseString);

  JsonObject leds = root.createNestedObject(F("leds"));
  leds[F("count")] = strip.getLengthTotal();
--- a/wled00/set.cpp
+++ b/wled00/set.cpp
@ -243,6 +243,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
      rlyPin = -1;
    }
    rlyMde = (bool)request->hasArg(F("RM"));
+    rlyOpenDrain = (bool)request->hasArg(F("RO"));

    disablePullUp = (bool)request->hasArg(F("IP"));
    touchThreshold = request->arg(F("TT")).toInt();
--- a/wled00/wled.h
+++ b/wled00/wled.h
@ -243,27 +243,32 @@ using PSRAMDynamicJsonDocument = BasicJsonDocument<PSRAM_Allocator>;
 //     int arr[]{0,1,2} becomes WLED_GLOBAL int arr[] _INIT_N(({0,1,2}));

 #ifndef WLED_DEFINE_GLOBAL_VARS
-# define WLED_GLOBAL extern
-# define _INIT(x)
-# define _INIT_N(x)
+  #define WLED_GLOBAL extern
+  #define _INIT(x)
+  #define _INIT_N(x)
+  #define _INIT_PROGMEM(x)
 #else
-# define WLED_GLOBAL
-# define _INIT(x) = x
-
-//needed to ignore commas in array definitions
-#define UNPACK( ... ) __VA_ARGS__
-# define _INIT_N(x) UNPACK x
+  #define WLED_GLOBAL
+  #define _INIT(x) = x
+  //needed to ignore commas in array definitions
+  #define UNPACK( ... ) __VA_ARGS__
+  #define _INIT_N(x) UNPACK x
+  #define _INIT_PROGMEM(x) PROGMEM = x
 #endif

 #define STRINGIFY(X) #X
 #define TOSTRING(X) STRINGIFY(X)

 #ifndef WLED_VERSION
-  #define WLED_VERSION "dev"
+  #define WLED_VERSION dev
+#endif
+#ifndef WLED_RELEASE_NAME
+  #define WLED_RELEASE_NAME dev_release
 #endif

 // Global Variable definitions
 WLED_GLOBAL char versionString[] _INIT(TOSTRING(WLED_VERSION));
+WLED_GLOBAL char releaseString[] _INIT_PROGMEM(TOSTRING(WLED_RELEASE_NAME)); // somehow this will not work if using "const char releaseString[]
 #define WLED_CODENAME "Kōsen"

 // AP and OTA default passwords (for maximum security change them!)
@ -288,6 +293,12 @@ WLED_GLOBAL bool rlyMde _INIT(true);
 #else
 WLED_GLOBAL bool rlyMde _INIT(RLYMDE);
 #endif
+//Use open drain (floating pin) when relay should be off
+#ifndef RLYODRAIN
+WLED_GLOBAL bool rlyOpenDrain _INIT(false);
+#else
+WLED_GLOBAL bool rlyOpenDrain _INIT(RLYODRAIN);
+#endif
 #ifndef IRPIN
  #define IRPIN -1
 #endif
--- a/wled00/xml.cpp
+++ b/wled00/xml.cpp
@ -458,6 +458,7 @@ void getSettingsJS(byte subPage, char* dest)
    sappend('i',SET_F("PB"),strip.paletteBlend);
    sappend('v',SET_F("RL"),rlyPin);
    sappend('c',SET_F("RM"),rlyMde);
+    sappend('c',SET_F("RO"),rlyOpenDrain);
    for (uint8_t i=0; i<WLED_MAX_BUTTONS; i++) {
      oappend(SET_F("addBtn("));
      oappend(itoa(i,nS,10)); oappend(",");
@ -722,6 +723,8 @@ void getSettingsJS(byte subPage, char* dest)
    sappends('m',SET_F("(\"sip\")[0]"),(char*)F("WLED "));
    olen -= 2; //delete ";
    oappend(versionString);
+    oappend(SET_F("<br>"));
+    oappend((char*)FPSTR(releaseString));
    oappend(SET_F("<br>("));
    #if defined(ARDUINO_ARCH_ESP32)
    oappend(ESP.getChipModel());
Autor	SHA1	Wiadomość	Data
Blaž Kristan	b3acc97d03	Merge pull request #3920 from Suxsem/relay-3-states Relay open drain output (allow esp32 to drive 5v relay modules)	2024-04-26 07:06:03 +02:00
Suxsem	24bd1db4fc	"X" span near to the number input field	2024-04-26 00:29:48 +02:00
Blaz Kristan	e83d3cb4a3	Fix for #3878	2024-04-24 16:04:54 +02:00
Blaz Kristan	674481f0d1	Multiple fixes - several compile warning fixes - multipin LED compile config - release info (update page, JSON "info") - WiFi scan fix if no networks found - UI glitch when no presets are found fix With multipin LED config it is now possible to assign GPIO to PWM RGB outputs. Achieved by having length of DATA_PINS be divisble by lengt of PIXEL_COUNTS.	2024-04-23 19:05:49 +02:00
Blaz Kristan	5d271d21bc	INI cleanup added 8M ESP32 and 16M ESP32-S3	2024-04-23 18:55:36 +02:00
Frank	4e4493e627	Merge pull request #3902 from Aircoookie/arduino_2_0_9 update esp32 platform to arduino-esp32 v2.0.9	2024-04-23 15:56:08 +02:00
Frank	1154905818	upgrading WROVER to use new platform	2024-04-23 15:49:39 +02:00
Frank	0d3ea848c2	"big partition" added - 300KB FS and coredump support(from WLEDMM)	2024-04-23 15:27:44 +02:00
Frank	8ffe1e65fd	audioreactive: arduino-esp32 up to 2.0.14 still has the swapped-channel-bug	2024-04-23 15:07:08 +02:00
Blaž Kristan	127ea7e351	Fix for #3926	2024-04-23 13:04:17 +02:00
Suxsem	34b16f1919	optimizations	2024-04-21 20:02:00 +02:00
Suxsem	fa32faf759	feat(new): relay open drain output	2024-04-21 13:37:07 +02:00
Blaz Kristan	5c502b1fe4	Bump arduinoFFT, organise partitions	2024-04-17 22:49:33 +02:00
Frank	442d7a7226	arduino-esp32 v2.0.9	2024-04-15 14:08:28 +02:00