Implemented PinManager and rerun setup of usermod after updating pins/
Registered in const.h and pin_manager.h I tried to follow the existing formatting/numbering in these files.
Wrapped any strings I could in F()
Added public variables to the BME280 usermod based on those in the Temperature usermod. Only complication is that this usermod utilises different function calls depending on whether user defines celsius or not. I have handled this for the temperature, but the Dew Point and Heat Index are relative to the temperature.
I've also addressed some areas where I'd previously assumed Celsius for reporting purposes as my test case is using Farenheit.
I added a Usermod interface for key settings. I used a PinArray for the SDA/SCL pins, but you can't name these individually.
I have also made a display to show the temperature/humidity values in the web interface's Info screen.
I had to change the definition of those items in order to allow these new functions to work. I have not noticed any negative side effects to this change.
At the moment, I've not figured out how to make Celsius/Farenheit toggleable due to the way the #define setup works.
Finally, I have added a routine to publish MQTT Discovery Topics for Home Assistant (toggleable in the Usermod screen).
I've been testing this on the only suitable device I have for a few months and haven't noticed any problems.
* Update wizlights.h
adds new features and options for wizlights usermod
* Update wizlights.h
Change how IPs are numbered.
Non-programmers incorrectly start counting at 1
* Update wizlights.h
updated default cold white enhanced white setting to a lower value.
* Update wizlights.h
added logic for connection check before UDP sending.
Seems more important for ESP32
* Update readme.md
* added first version (work in progress)
* added some sensors to publish
* typo
* added dependency
* mqtt si7021_* names + don't retain
* timer to 60 s
* some changes to HA auto discovery
* added config entries (no function yet)
* renaming
* made configs work
* added getId()
* refactoring + wrong mqtt topics fixed
* retain HA auto discovery
* do not spam serial console on each sensor update
* added readme
* add update interval info
Co-authored-by: Christian Schwinne <dev.aircoookie@gmail.com>
* - implement V2 Usermod to handle wordclocks with 11x10 pixels and 4 additional dots for the minutes
* - fix wording issue for "six"
-
* - add some more comments
* - fix issue with "zwölf"
* Added digit dimming and support for .clk format (see https://github.com/aly-fly/EleksTubeHAX)
* Small fixes and improvements, dimming optional
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
* define as float (not double)
* Avoid #define of 1 or 2 char symbols
Having this file define 'A' and 'C' pollutes
the global namespace, and causes conflicts
with other libraries that also pollute the
global namespace with short #defines.
It's easier to fix this header.
* unused variable warning
* UM QuinLED-An-Penta: First version
* UM QuinLED-An-Penta: Made OLED seconds a setting; small improvements
* UM QuinLED-An-Penta: Fixed unique ID
* Merge branch 'master' of https://github.com/Aircoookie/WLED
* UM QuinLED-An-Penta: Fixed config loading
* UM QuinLED-An-Penta: Replaced ledcRead() with calculating the percentage
* UM QuinLED-An-Penta: Fixed temp sensor readings
* UM QuinLED-An-Penta: Removing OLED bus clk setting
* UM QuinLED-An-Penta: ETH support, lots of OLED improvements
* UM quinled-an-penta: v1r1 adjustments
* Multirelay button support.
Added button hook for usermods.
* Added MultiRelay relay states to JSON state object
* Move button timings to constants
No delay waiting for double press on button 0 if no macro set
Co-authored-by: cschwinne <dev.aircoookie@gmail.com>
* UM QuinLED-An-Penta: First version
* UM QuinLED-An-Penta: Made OLED seconds a setting; small improvements
* UM QuinLED-An-Penta: Fixed unique ID
* Merge branch 'master' of https://github.com/Aircoookie/WLED
* UM QuinLED-An-Penta: Fixed config loading
* UM QuinLED-An-Penta: Replaced ledcRead() with calculating the percentage
* UM QuinLED-An-Penta: Fixed temp sensor readings
* UM QuinLED-An-Penta: Removing OLED bus clk setting
* UM QuinLED-An-Penta: ETH support, lots of OLED improvements
Blaz Kristan