Merge branch 'master' into dmx_settings

.github/stale.yml

@@ -0,0 +1,20 @@
+# Number of days of inactivity before an issue becomes stale
+daysUntilStale: 120
+# Number of days of inactivity before a stale issue is closed
+daysUntilClose: 7
+# Issues with these labels will never be considered stale
+exemptLabels:
+  - pinned
+  - keep
+  - enhancement
+  - confirmed
+# Label to use when marking an issue as stale
+staleLabel: stale
+# Comment to post when marking an issue as stale. Set to `false` to disable
+markComment: >
+  Hey! This issue has been open for quite some time without any new comments now.
+  It will be closed automatically in a week if no further activity occurs.
+  
+  Thank you for using WLED!
+# Comment to post when closing a stale issue. Set to `false` to disable
+closeComment: false

.gitignore

@@ -6,3 +6,6 @@
 /wled00/Release
 /wled00/extLibs
 /platformio_override.ini
+.DS_Store
+.gitignore
+.clang-format

usermods/Enclosure_with_OLED_temp_ESP07/readme.md

@@ -1,5 +1,7 @@
 # Almost universal controller board for outdoor applications
 This usermod is using ideas from @mrVanboy and @400killer
+
+Installation of file: Copy and replace file in wled00 directory
 ## Project repository
 -   [Original repository](https://github.com/srg74/Controller-for-WLED-firmware) - Main controller repository
 ## Features
@@ -25,6 +27,11 @@ Uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[com
 ```ini
 # platformio.ini
 ...
+[platformio]
+...
+; default_envs = esp01_1m_full
+default_envs = esp07
+...
 [common]
 ...
 lib_deps_external =

usermods/Enclosure_with_OLED_temp_ESP07/usermod.cpp

@@ -1,3 +1,5 @@
+#include "wled.h"
+#include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <DallasTemperature.h> //Dallastemperature sensor
 //The SCL and SDA pins are defined here. 

usermods/QuinLED_Dig_Uno_Temp_MQTT/readme.md

@@ -1,7 +1,34 @@
-These files allow WLED 0.9.1 to report the temp sensor on the Quinled board to MQTT. I use it to report the board temp to Home Assistant via MQTT, so it will send notifications if something happens and the board start to heat up.
+# QuinLED Dig Uno board
 
+These files allow WLED 0.9.1 to report the temp sensor on the Quinled board to MQTT. I use it to report the board temp to Home Assistant via MQTT, so it will send notifications if something happens and the board start to heat up.
 This code uses Aircookie's WLED software. It has a premade file for user modifications. I use it to publish the temperature from the dallas temperature sensor on the Quinled board. The entries for the top of the WLED00 file, initializes the required libraries, and variables for the sensor. The .ino file waits for 60 seconds, and checks to see if the MQTT server is connected (thanks Aircoookie). It then poles the sensor, and published it using the MQTT service already running, using the main topic programmed in the WLED UI.
 
-To install:
+Installation of file: Copy and replace file in wled00 directory
 
-Replace the WLED06_usermod.ino file in Aircoookies WLED folder.
+## Project link
+
+* [QuinLED-Dig-Uno](https://quinled.info/2018/09/15/quinled-dig-uno/) - Project link
+
+### Platformio requirements
+
+Uncomment `DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
+
+```ini
+# platformio.ini
+...
+[platformio]
+...
+; default_envs = esp07
+default_envs = d1_mini
+...
+[common]
+...
+lib_deps_external =
+  ...
+  #For use SSD1306 OLED display uncomment following
+  U8g2@~2.27.3
+  #For Dallas sensor uncomment following 2 lines
+  DallasTemperature@~3.8.0
+  OneWire@~2.3.5
+...
+```

usermods/QuinLED_Dig_Uno_Temp_MQTT/usermod.cpp

@@ -1,3 +1,5 @@
+#include <Arduino.h>
+#include "wled.h"
 //Intiating code for QuinLED Dig-Uno temp sensor
 //Uncomment Celsius if that is your prefered temperature scale
 #include <DallasTemperature.h> //Dallastemperature sensor

usermods/Wemos_D1_mini+Wemos32_mini_shield/readme.md

@@ -1,4 +1,5 @@
 # Wemos D1 mini and Wemos32 mini shield
+-   Installation of file: Copy and replace file in wled00 directory
 -   Added third choice of controller Heltec WiFi-Kit-8. Totally DIY but with OLED display.
 ## Project repository
 -   [Original repository](https://github.com/srg74/WLED-wemos-shield) - WLED Wemos shield repository
@@ -22,3 +23,25 @@
 -   SSD1306 128x32 I2C OLED display
 -   DS18B20 (temperature sensor)
 -   Push button (N.O. momentary switch)
+
+### Platformio requirements
+Uncomment `U8g2@~2.27.3`,`DallasTemperature@~3.8.0`,`OneWire@~2.3.5 under` `[common]` section in `platformio.ini`:
+```ini
+# platformio.ini
+...
+[platformio]
+...
+; default_envs = esp07
+default_envs = d1_mini
+...
+[common]
+...
+lib_deps_external =
+  ...
+  #For use SSD1306 OLED display uncomment following
+  U8g2@~2.27.3
+  #For Dallas sensor uncomment following 2 lines
+  DallasTemperature@~3.8.0
+  OneWire@~2.3.5
+...
+```

usermods/Wemos_D1_mini+Wemos32_mini_shield/usermod.cpp

@@ -1,3 +1,5 @@
+#include "wled.h"
+#include <Arduino.h>
 #include <U8x8lib.h> // from https://github.com/olikraus/u8g2/
 #include <DallasTemperature.h> //Dallastemperature sensor
 #ifdef ARDUINO_ARCH_ESP32 //ESP32 boards

usermods/blynk_relay_control/wled06_usermod.ino

@@ -1,7 +1,7 @@
 /*
  * This file allows you to add own functionality to WLED more easily
  * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
- * EEPROM bytes 2750+ are reserved for your custom use case. (if you extend #define EEPSIZE in wled01_eeprom.h)
+ * EEPROM bytes 2750+ are reserved for your custom use case. (if you extend #define EEPSIZE in wled_eeprom.h)
  * bytes 2400+ are currently ununsed, but might be used for future wled features
  */
 

usermods/readme.md

@@ -1,13 +1,13 @@
 ### Usermods
 
-This folder serves as a repository for usermods (custom `wled06_usermod.ino` files)!
+This folder serves as a repository for usermods (custom `usermod.cpp` files)!
 
 If you have created an usermod that you believe is useful (for example to support a particular sensor, display, feature...), feel free to contribute by opening a pull request!
 
 In order for other people to be able to have fun with your usermod, please keep these points in mind:
 
 -   Create a folder in this folder with a descriptive name (for example `usermod_ds18b20_temp_sensor_mqtt`)  
--   Include your custom `wled06_usermod.ino` file  
+-   Include your custom `usermod.cpp` file  
 -   If your usermod requires changes to other WLED files, please write a `readme.md` outlining the steps one has to take to use the usermod  
 -   Create a pull request!  
 -   If your feature is useful for the majority of WLED users, I will consider adding it to the base code!  

usermods/stairway_wipe_basic/wled06_usermod.ino

@@ -1,7 +1,7 @@
 /*
  * This file allows you to add own functionality to WLED more easily
  * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
- * EEPROM bytes 2750+ are reserved for your custom use case. (if you extend #define EEPSIZE in wled01_eeprom.h)
+ * EEPROM bytes 2750+ are reserved for your custom use case. (if you extend #define EEPSIZE in wled_eeprom.h)
  * bytes 2400+ are currently ununsed, but might be used for future wled features
  */