Autowhite cleanup

Fix for UCS8904 hasWhite().

wled00/bus_manager.cpp

@@ -77,7 +77,7 @@ uint8_t IRAM_ATTR ColorOrderMap::getPixelColorOrder(uint16_t pix, uint8_t defaul
 
 uint32_t Bus::autoWhiteCalc(uint32_t c) {
   uint8_t aWM = _autoWhiteMode;
-  if (_gAWM < 255) aWM = _gAWM;
+  if (_gAWM != AW_GLOBAL_DISABLED) aWM = _gAWM;
   if (aWM == RGBW_MODE_MANUAL_ONLY) return c;
   uint8_t w = W(c);
   //ignore auto-white calculation if w>0 and mode DUAL (DUAL behaves as BRIGHTER if w==0)

wled00/bus_manager.h

@@ -114,7 +114,7 @@ class Bus {
     , _needsRefresh(refresh)
     , _data(nullptr) // keep data access consistent across all types of buses
     {
-      _autoWhiteMode = Bus::hasWhite(_type) ? aw : RGBW_MODE_MANUAL_ONLY;
+      _autoWhiteMode = Bus::hasWhite(type) ? aw : RGBW_MODE_MANUAL_ONLY;
     };
 
     virtual ~Bus() {} //throw the bus under the bus
@@ -148,7 +148,7 @@ class Bus {
     }
     virtual bool hasWhite(void) { return Bus::hasWhite(_type); }
     static  bool hasWhite(uint8_t type) {
-      if ((type >= TYPE_WS2812_1CH && type <= TYPE_WS2812_WWA) || type == TYPE_SK6812_RGBW || type == TYPE_TM1814) return true; // digital types with white channel
+      if ((type >= TYPE_WS2812_1CH && type <= TYPE_WS2812_WWA) || type == TYPE_SK6812_RGBW || type == TYPE_TM1814 || type == TYPE_UCS8904) return true; // digital types with white channel
       if (type > TYPE_ONOFF && type <= TYPE_ANALOG_5CH && type != TYPE_ANALOG_3CH) return true; // analog types with white channel
       if (type == TYPE_NET_DDP_RGBW) return true; // network types with white channel
       return false;

wled00/cfg.cpp

@@ -81,10 +81,9 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
   // initialize LED pins and lengths prior to other HW (except for ethernet)
   JsonObject hw_led = hw["led"];
 
-  uint8_t autoWhiteMode = RGBW_MODE_MANUAL_ONLY;
   CJSON(strip.ablMilliampsMax, hw_led[F("maxpwr")]);
   CJSON(strip.milliampsPerLed, hw_led[F("ledma")]);
-  Bus::setGlobalAWMode(hw_led[F("rgbwm")] | 255);
+  Bus::setGlobalAWMode(hw_led[F("rgbwm")] | AW_GLOBAL_DISABLED);
   CJSON(correctWB, hw_led["cct"]);
   CJSON(cctFromRgb, hw_led[F("cr")]);
   CJSON(strip.cctBlending, hw_led[F("cb")]);
@@ -150,7 +149,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
       }
 
       uint16_t length = elm["len"] | 1;
-      uint8_t colorOrder = (int)elm[F("order")];
+      uint8_t colorOrder = (int)elm[F("order")]; // contains white channel swap option in upper nibble
       uint8_t skipFirst = elm[F("skip")];
       uint16_t start = elm["start"] | 0;
       if (length==0 || start + length > MAX_LEDS) continue; // zero length or we reached max. number of LEDs, just stop
@@ -159,7 +158,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
       bool refresh = elm["ref"] | false;
       uint16_t freqkHz = elm[F("freq")] | 0;  // will be in kHz for DotStar and Hz for PWM (not yet implemented fully)
       ledType |= refresh << 7; // hack bit 7 to indicate strip requires off refresh
-      uint8_t AWmode = elm[F("rgbwm")] | autoWhiteMode;
+      uint8_t AWmode = elm[F("rgbwm")] | RGBW_MODE_MANUAL_ONLY;
       if (fromFS) {
         BusConfig bc = BusConfig(ledType, pins, start, length, colorOrder, reversed, skipFirst, AWmode, freqkHz, useGlobalLedBuffer);
         mem += BusManager::memUsage(bc);

wled00/set.cpp

@@ -148,7 +148,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
       } else {
         freqHz = 0;
       }
-      channelSwap = (type == TYPE_SK6812_RGBW || type == TYPE_TM1814) ? request->arg(wo).toInt() : 0;
+      channelSwap = Bus::hasWhite(type) ? request->arg(wo).toInt() : 0;
       type |= request->hasArg(rf) << 7; // off refresh override
       // actual finalization is done in WLED::loop() (removing old busses and adding new)
       // this may happen even before this loop is finished so we do "doInitBusses" after the loop