pull/2737/head
Blaž Kristan 2021-12-14 06:32:08 +01:00
rodzic 5b88ba6d1d
commit c2b2fafc9c
1 zmienionych plików z 6 dodań i 2 usunięć

Wyświetl plik

@ -134,6 +134,7 @@ class FourLineDisplayUsermod : public Usermod {
DisplayType type = FLD_TYPE; // display type
#else
int8_t ioPin[5] = {FLD_PIN_CLOCKSPI, FLD_PIN_DATASPI, FLD_PIN_CS, FLD_PIN_DC, FLD_PIN_RESET}; // SPI pins: CLK, MOSI, CS, DC, RST
uint32_t ioFrequency = 1000000; // in Hz (minimum is 500kHz, baseline is 1MHz and maximum should be 20MHz)
DisplayType type = FLD_TYPE; // display type
#endif
bool flip = false; // flip display 180°
@ -252,7 +253,7 @@ class FourLineDisplayUsermod : public Usermod {
initDone = true;
DEBUG_PRINTLN(F("Starting display."));
if (!(type == SSD1306_SPI || type == SSD1306_SPI64)) u8x8->setBusClock(ioFrequency); // can be used for SPI too
/*if (!(type == SSD1306_SPI || type == SSD1306_SPI64))*/ u8x8->setBusClock(ioFrequency); // can be used for SPI too
u8x8->begin();
setFlipMode(flip);
setContrast(contrast); //Contrast setup will help to preserve OLED lifetime. In case OLED need to be brighter increase number up to 255
@ -699,7 +700,10 @@ class FourLineDisplayUsermod : public Usermod {
screenTimeout = (top[FPSTR(_screenTimeOut)] | screenTimeout/1000) * 1000;
sleepMode = top[FPSTR(_sleepMode)] | sleepMode;
clockMode = top[FPSTR(_clockMode)] | clockMode;
ioFrequency = min(3400, max(100, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
if (newType == SSD1306_SPI || newType == SSD1306_SPI64)
ioFrequency = min(20000, max(500, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
else
ioFrequency = min(3400, max(100, (int)(top[FPSTR(_busClkFrequency)] | ioFrequency/1000))) * 1000; // limit frequency
DEBUG_PRINT(FPSTR(_name));
if (!initDone) {