Merge pull request #17 from Aircoookie/master

update

usermods/blynk_relay_control/README.md

@@ -0,0 +1,28 @@
+# Blynk controllable relay
+This usermod allows controlling a relay state from the user variables. It also allows the user variables to be set over Blynk.
+
+Optionally, the servo can have a reset timer to go back to it's default state after an interval. This interval is set through userVar1.
+
+## Instalation
+
+Replace the WLED06_usermod.ino file in Aircoookies WLED folder with the one here.
+
+## Customizations
+
+Update the following parameters in WLED06_usermod.ino to configure the mod's behavior:
+
+```cpp
+//Which pin is the relay connected to
+#define RELAY_PIN 5
+//Which pin state should the relay default to
+#define RELAY_PIN_DEFAULT LOW
+//If >0 The controller returns to RELAY_PIN_DEFAULT after this time in milliseconds
+#define RELAY_PIN_TIMER_DEFAULT 3000
+
+//Blynk virtual pin for controlling relay
+#define BLYNK_USER_VAR0_PIN V9
+//Blynk virtual pin for controlling relay timer
+#define BLYNK_USER_VAR1_PIN V10
+//Number of milliseconds between updating blynk
+#define BLYNK_RELAY_UPDATE_INTERVAL 5000
+```

usermods/blynk_relay_control/wled06_usermod.ino

@@ -0,0 +1,96 @@
+/*
+ * This file allows you to add own functionality to WLED more easily
+ * See: https://github.com/Aircoookie/WLED/wiki/Add-own-functionality
+ * EEPROM bytes 2750+ are reserved for your custom use case. (if you extend #define EEPSIZE in wled01_eeprom.h)
+ * bytes 2400+ are currently ununsed, but might be used for future wled features
+ */
+
+//Use userVar0 (API calls &U0=, uint16_t) to set relay state
+#define relayPinState userVar0
+//Use userVar1 (API calls &U1=, uint16_t) to set relay timer duration
+//Ignored if 0, otherwise number of milliseconds to allow relay to stay in
+//non default state.
+#define relayTimerInterval userVar1
+
+//Which pin is the relay connected to
+#define RELAY_PIN 5
+//Which pin state should the relay default to
+#define RELAY_PIN_DEFAULT LOW
+//If >0 The controller returns to RELAY_PIN_DEFAULT after this time in milliseconds
+#define RELAY_PIN_TIMER_DEFAULT 3000
+
+//Blynk virtual pin for controlling relay
+#define BLYNK_USER_VAR0_PIN V9
+//Blynk virtual pin for controlling relay timer
+#define BLYNK_USER_VAR1_PIN V10
+//Number of milliseconds between updating blynk
+#define BLYNK_RELAY_UPDATE_INTERVAL 5000
+
+//Is the timer for resetting the relay active
+bool relayTimerStarted = false;
+//millis() time after which relay will be reset
+unsigned long relayTimeToDefault = 0;
+//millis() time after which relay vars in Blynk will be sent
+unsigned long relayBlynkUpdateTime = 0;
+
+//gets called once at boot. Do all initialization that doesn't depend on network here
+void userSetup()
+{
+  relayPinState = RELAY_PIN_DEFAULT;
+  relayTimerInterval = RELAY_PIN_TIMER_DEFAULT;
+  pinMode(RELAY_PIN, OUTPUT);
+  digitalWrite(RELAY_PIN, relayPinState);
+}
+
+//gets called every time WiFi is (re-)connected. Initialize own network interfaces here
+void userConnected()
+{
+}
+
+//loop. You can use "if (WLED_CONNECTED)" to check for successful connection
+void userLoop()
+{
+  //Normalize relayPinState to an accepted value
+  if (relayPinState != HIGH && relayPinState != LOW) {
+    relayPinState = RELAY_PIN_DEFAULT;
+  }
+  //If relay changes and relayTimerInterval is set, start a timer to change back
+  if (relayTimerInterval != 0 &&
+      relayPinState != RELAY_PIN_DEFAULT &&
+      !relayTimerStarted ) {
+    relayTimerStarted = true;
+    relayTimeToDefault = millis() + relayTimerInterval;
+  }
+  //If manually changed back to default, cancel timer
+  if (relayTimerStarted && relayPinState == RELAY_PIN_DEFAULT ) {
+    relayTimerStarted = false;
+  }
+  //If timer completes, set relay back to default
+  if (relayTimerStarted && millis() > relayTimeToDefault) {
+    relayPinState = RELAY_PIN_DEFAULT;
+    relayTimerStarted = false;
+  }
+  digitalWrite(RELAY_PIN, relayPinState);
+  updateRelayBlynk();
+}
+
+//Update Blynk with state of userVars at BLYNK_RELAY_UPDATE_INTERVAL
+void updateRelayBlynk()
+{
+  if (!WLED_CONNECTED) return;
+  if (relayBlynkUpdateTime > millis()) return;
+  Blynk.virtualWrite(BLYNK_USER_VAR0_PIN, userVar0);
+  Blynk.virtualWrite(BLYNK_USER_VAR1_PIN, userVar1);
+  relayBlynkUpdateTime = millis() + BLYNK_RELAY_UPDATE_INTERVAL;
+}
+
+//Add Blynk callback for setting userVar0
+BLYNK_WRITE(BLYNK_USER_VAR0_PIN)
+{
+  userVar0 = param.asInt();
+}
+//Add Blynk callback for setting userVar1
+BLYNK_WRITE(BLYNK_USER_VAR1_PIN)
+{
+  userVar1 = param.asInt();
+}