kopia lustrzana https://github.com/Aircoookie/WLED
Add 12V brightness limiter and configurable per-led current (#295)
cschwinne
rodzic
6989b1730e
commit
b3d728df91
|
|
@ -363,6 +363,7 @@ class WS2812FX {
|
|||
paletteFade = 0,
|
||||
paletteBlend = 0,
|
||||
colorOrder = 0,
|
||||
milliampsPerLed = 55,
|
||||
getBrightness(void),
|
||||
getMode(void),
|
||||
getSpeed(void),
|
||||
|
|
|
|||
|
|
@ -183,11 +183,7 @@ void WS2812FX::setCronixieDigits(byte d[])
|
|||
//Stay safe with high amperage and have a reasonable safety margin!
|
||||
//I am NOT to be held liable for burned down garages!
|
||||
|
||||
//fine tune power estimation constants for your setup
|
||||
#define PU_PER_MA 3600 //power units per milliamperere for accurate power estimation
|
||||
//formula: 195075 divided by mA per fully lit LED, here ~54mA)
|
||||
//lowering the value increases the estimated usage and therefore makes the ABL more aggressive
|
||||
|
||||
//fine tune power estimation constants for your setup
|
||||
#define MA_FOR_ESP 100 //how much mA does the ESP use (Wemos D1 about 80mA, ESP32 about 120mA)
|
||||
//you can set it to 0 if the ESP is powered by USB and the LEDs by external
|
||||
|
||||
|
|
@ -197,12 +193,13 @@ void WS2812FX::show(void) {
|
|||
//one PU is the power it takes to have 1 channel 1 step brighter per brightness step
|
||||
//so A=2,R=255,G=0,B=0 would use 510 PU per LED (1mA is about 3700 PU)
|
||||
|
||||
if (ablMilliampsMax > 149 && ablMilliampsMax < 65000) //lower numbers and 65000 turn off calculation
|
||||
if (ablMilliampsMax > 149 && milliampsPerLed > 0) //0 mA per LED and too low numbers turn off calculation
|
||||
{
|
||||
uint32_t powerBudget = (ablMilliampsMax - MA_FOR_ESP) * PU_PER_MA; //100mA for ESP power
|
||||
if (powerBudget > PU_PER_MA * _length) //each LED uses about 1mA in standby, exclude that from power budget
|
||||
uint32_t puPerMilliamp = 195075 / milliampsPerLed;
|
||||
uint32_t powerBudget = (ablMilliampsMax - MA_FOR_ESP) * puPerMilliamp; //100mA for ESP power
|
||||
if (powerBudget > puPerMilliamp * _length) //each LED uses about 1mA in standby, exclude that from power budget
|
||||
{
|
||||
powerBudget -= PU_PER_MA * _length;
|
||||
powerBudget -= puPerMilliamp * _length;
|
||||
} else
|
||||
{
|
||||
powerBudget = 0;
|
||||
|
|
@ -232,10 +229,10 @@ void WS2812FX::show(void) {
|
|||
uint8_t scaleB = (scaleI > 255) ? 255 : scaleI;
|
||||
uint8_t newBri = scale8(_brightness, scaleB);
|
||||
bus->SetBrightness(newBri);
|
||||
currentMilliamps = (powerSum0 * newBri) / PU_PER_MA;
|
||||
currentMilliamps = (powerSum0 * newBri) / puPerMilliamp;
|
||||
} else
|
||||
{
|
||||
currentMilliamps = powerSum / PU_PER_MA;
|
||||
currentMilliamps = powerSum / puPerMilliamp;
|
||||
bus->SetBrightness(_brightness);
|
||||
}
|
||||
currentMilliamps += MA_FOR_ESP; //add power of ESP back to estimate
|
||||
|
|
|
|||
Plik binarny nie jest wyświetlany.
|
|
@ -71,90 +71,126 @@ AP IP: <span class="sip"> Not active </span><hr>
|
|||
|
||||
//LED settings
|
||||
const char PAGE_settings_leds[] PROGMEM = R"=====(<!DOCTYPE html>
|
||||
<html><head><meta name="viewport" content="width=500">
|
||||
<title>LED Settings</title><script>var f=0,p=0;function H()
|
||||
<html><head><meta name=viewport content="width=500">
|
||||
<title>LED Settings</title>
|
||||
<script>var f=0,p=0,d=document,laprev=55;function H()
|
||||
{window.open("https://github.com/Aircoookie/WLED/wiki/Settings#led-settings");}
|
||||
function B(){window.open("/settings","_self");}function S(){GetV();setTimeout(function(){fillfx(0);},200);setTimeout(function(){fillfx(1);},400);UI();}
|
||||
function UI(){var myC=document.querySelectorAll('.wc'),l=myC.length;for(i=0;i<l;i++){myC[i].style.display=(document.getElementById('rgbw').checked)?'inline':'none';}
|
||||
var val=Math.ceil((100+document.Sf.LC.value*55)/500)/2;val=(val>5)?Math.ceil(val):val;var s="";if(val<1.02){s="ESP 5V pin with 1A USB supply";}else{s="External 5V ";s+=val;s+="A supply connected to LEDs";}document.getElementById('psu').innerHTML=s;}
|
||||
function fillfx(pl){e="<option>Error loading list!</option>";el=pl?Sf.FP:Sf.FX;fetch(pl?'/json/pal':'/json/eff').then(res=>{if(!res.ok){el.innerHTML=e;}
|
||||
function B()
|
||||
{window.open("/settings","_self");}
|
||||
function S(){GetV();setTimeout(function(){fillfx(0);},200);setTimeout(function(){fillfx(1);},400);setABL();}
|
||||
function enABL(){var en=d.getElementById('able').checked;d.Sf.LA.value=(en)?laprev:0;d.getElementById('abl').style.display=(en)?'inline':'none';d.getElementById('psu2').style.display=(en)?'inline':'none';if(d.Sf.LA.value>0)setABL();}
|
||||
function enLA(){var val=d.Sf.LAsel.value;d.Sf.LA.value=val;d.getElementById('LAdis').style.display=(val==50)?'inline':'none';UI();}
|
||||
function setABL(){d.getElementById('able').checked = true;d.Sf.LAsel.value = 50;switch(parseInt(d.Sf.LA.value)){case 0:d.getElementById('able').checked=false;enABL();break;case 30:d.Sf.LAsel.value=30;break;case 35:d.Sf.LAsel.value=35;break;case 55:d.Sf.LAsel.value=55;break;default:d.getElementById('LAdis').style.display='inline';}
|
||||
UI();}
|
||||
function UI(){var myC=d.querySelectorAll('.wc'),l=myC.length;for(i=0;i<l;i++){myC[i].style.display=(d.getElementById('rgbw').checked)?'inline':'none';}
|
||||
d.getElementById('ledwarning').style.display=(d.Sf.LC.value>1000)?'inline':'none';d.getElementById('ampwarning').style.display=(d.Sf.MA.value>7200)?'inline':'none';if(d.Sf.LA.value>0)laprev=d.Sf.LA.value;var val=Math.ceil((100+d.Sf.LC.value*laprev)/500)/2;val=(val>5)?Math.ceil(val):val;var s="";var is12V=(d.Sf.LAsel.value==30);if(val<1.02&&!is12V)
|
||||
{s="ESP 5V pin with 1A USB supply";}else
|
||||
{s+=is12V?"12V ":"5V ";s+=val;s+="A supply connected to LEDs";}
|
||||
var val2=Math.ceil((100+d.Sf.LC.value*laprev)/1500)/2;val2=(val2>5)?Math.ceil(val2):val2;var s2="(for most effects, ~";s2+=val2;s2+="A is enough)<br>";d.getElementById('psu').innerHTML=s;d.getElementById('psu2').innerHTML=s2;}
|
||||
function fillfx(pl)
|
||||
{e="<option>Error loading list!</option>";el=pl?Sf.FP:Sf.FX;fetch(pl?'/json/palettes':'/json/effects').then(res=>{if(!res.ok){el.innerHTML=e;}
|
||||
return res.json();}).then(json=>{var x="";for(i in json){x+="<option value=\""+i+"\">"+json[i]+" ("+i+")</option>";}
|
||||
el.innerHTML=x;el.selectedIndex=pl?p:f;}).catch(function(){el.innerHTML=e;})}function GetV(){var d=document;%CSS%%SCSS%</head>
|
||||
<body onload="S()">
|
||||
<form id="form_s" name="Sf" method="post">
|
||||
<div class="helpB"><button type="button" onclick="H()">?</button></div>
|
||||
<button type="button" onclick="B()">Back</button><button type="submit">Save</button><hr>
|
||||
el.innerHTML=x;el.selectedIndex=pl?p:f;}).catch(function(){el.innerHTML=e;})}
|
||||
function GetV(){%CSS%%SCSS%</head>
|
||||
<body onload=S()>
|
||||
<form id=form_s name=Sf method=post>
|
||||
<div class=helpB><button type=button onclick=H()>?</button></div>
|
||||
<button type=button onclick=B()>Back</button><button type=submit>Save</button><hr>
|
||||
<h2>LED setup</h2>
|
||||
LED count: <input name="LC" type="number" min="1" max="1500" oninput=UI() required><br>
|
||||
LED count: <input name=LC type=number min=1 max=1500 oninput=UI() required><br>
|
||||
<div id=ledwarning style="color:orange; display: none;">
|
||||
⚠ You might run into stability or lag issues.<br>
|
||||
Use less than 1000 LEDs per ESP for the best experience!<br>
|
||||
</div>
|
||||
<i>Recommended power supply for brightest white:</i><br>
|
||||
<b><span id="psu">?</span></b><br><br>
|
||||
Maximum Current: <input name="MA" type="number" min="250" max="65000" required> mA<br>
|
||||
<b><span id=psu>?</span></b><br>
|
||||
<span id=psu2><br></span>
|
||||
<br>
|
||||
Enable automatic brightness limiter: <input type=checkbox name=ABen onchange=enABL() id=able><br>
|
||||
<div id=abl>
|
||||
Maximum Current: <input name=MA type=number min=250 max=65000 oninput=UI() required> mA<br>
|
||||
<div id=ampwarning style="color:orange; display: none;">
|
||||
⚠ Your power supply provides high current.<br>
|
||||
To improve the safety of your setup,<br>
|
||||
please use thick cables,<br>
|
||||
multiple power injection points and a fuse!<br>
|
||||
</div>
|
||||
<i>Automatically limits brightness to stay close to the limit.<br>
|
||||
Keep at <1A if powering LEDs directly from the ESP 5V pin!<br>
|
||||
If you are using an external 5V supply, enter its rating.<br>
|
||||
"65000" completely diasbles the power calculation.<br>
|
||||
(Current estimated usage: <span class="pow">unknown</span>)</i><br><br>
|
||||
LEDs are 4-channel type (RGBW): <input type="checkbox" name="EW" onchange=UI() id="rgbw"><br>
|
||||
If you are using an external power supply, enter its rating.<br>
|
||||
(Current estimated usage: <span class=pow>unknown</span>)</i><br><br>
|
||||
LED voltage (Max. current for a single LED):<br>
|
||||
<select name=LAsel onchange=enLA()>
|
||||
<option value=55 selected>5V default (55mA)</option>
|
||||
<option value=35>5V efficient (35mA)</option>
|
||||
<option value=30>12V (30mA)</option>
|
||||
<option value=50>Custom</option>
|
||||
</select><br>
|
||||
<span id=LAdis style=display:none>Custom max. current per LED: <input name=LA type=number min=0 max=255 id=la oninput=UI() required> mA<br></span>
|
||||
<i>Keep at default if you are unsure about your type of LEDs.</i><br>
|
||||
</div>
|
||||
<br>
|
||||
LEDs are 4-channel type (RGBW): <input type=checkbox name=EW onchange=UI() id=rgbw><br>
|
||||
Color order:
|
||||
<select name="CO">
|
||||
<option value="0">GRB</option>
|
||||
<option value="1">RGB</option>
|
||||
<option value="2">BRG</option>
|
||||
<option value="3">RBG</option></select>
|
||||
<select name=CO>
|
||||
<option value=0>GRB</option>
|
||||
<option value=1>RGB</option>
|
||||
<option value=2>BRG</option>
|
||||
<option value=3>RBG</option>
|
||||
</select>
|
||||
<h3>Defaults</h3>
|
||||
Turn LEDs on after power up/reset: <input type="checkbox" name="BO"><br>
|
||||
Default brightness: <input name="CA" type="number" min="0" max="255" required> (0-255)<br><br>
|
||||
Set current color, brightness and effects as boot default: <input type="checkbox" name="IS"><br>
|
||||
Set current preset cycle setting as boot default: <input type="checkbox" name="PC">
|
||||
Turn LEDs on after power up/reset: <input type=checkbox name=BO><br>
|
||||
Default brightness: <input name=CA type=number min=0 max=255 required> (0-255)<br><br>
|
||||
Set current color, brightness and effects as boot default: <input type=checkbox name=IS><br>
|
||||
Set current preset cycle setting as boot default: <input type=checkbox name=PC>
|
||||
<br>- <i>or</i> -<br>
|
||||
Apply preset <input name="BP" type="number" min="0" max="25" required> at boot (0 uses defaults)
|
||||
Apply preset <input name=BP type=number min=0 max=25 required> at boot (0 uses defaults)
|
||||
<br>- <i>or</i> -<br>
|
||||
Default RGB<span class="wc">W</span> color:<br>
|
||||
<input name="CR" type="number" min="0" max="255" required>
|
||||
<input name="CG" type="number" min="0" max="255" required>
|
||||
<input name="CB" type="number" min="0" max="255" required>
|
||||
<span class="wc"><input name="CW" type="number" min="0" max="255" required><br>
|
||||
Auto-calculate white from RGB instead: <input type="checkbox" name="AW"></span><br>
|
||||
Default secondary RGB<span class="wc">W</span>:<br>
|
||||
<input name="SR" type="number" min="0" max="255" required>
|
||||
<input name="SG" type="number" min="0" max="255" required>
|
||||
<input name="SB" type="number" min="0" max="255" required>
|
||||
<span class="wc"><input name="SW" type="number" min="0" max="255" required></span><br>
|
||||
Default RGB<span class=wc>W</span> color:<br>
|
||||
<input name=CR type=number min=0 max=255 required>
|
||||
<input name=CG type=number min=0 max=255 required>
|
||||
<input name=CB type=number min=0 max=255 required>
|
||||
<span class=wc><input name=CW type=number min=0 max=255 required><br>
|
||||
Auto-calculate white from RGB instead: <input type=checkbox name=AW></span><br>
|
||||
Default secondary RGB<span class=wc>W</span>:<br>
|
||||
<input name=SR type=number min=0 max=255 required>
|
||||
<input name=SG type=number min=0 max=255 required>
|
||||
<input name=SB type=number min=0 max=255 required>
|
||||
<span class=wc><input name=SW type=number min=0 max=255 required></span><br>
|
||||
Default effect ID:<br>
|
||||
<select name="FX">
|
||||
<select name=FX>
|
||||
<option>Loading...</option>
|
||||
</select>
|
||||
<br>Default color palette:<br>
|
||||
<select name="FP">
|
||||
<select name=FP>
|
||||
<option>Loading...</option>
|
||||
</select><br>
|
||||
Default effect speed: <input name="SX" type="number" min="0" max="255" required><br>
|
||||
Default effect intensity: <input name="IX" type="number" min="0" max="255" required><br><br>
|
||||
Use Gamma correction for color: <input type="checkbox" name="GC"> (strongly recommended)<br>
|
||||
Use Gamma correction for brightness: <input type="checkbox" name="GB"> (not recommended)<br><br>
|
||||
Brightness factor: <input name="BF" type="number" min="0" max="255" required> %%
|
||||
Default effect speed: <input name=SX type=number min=0 max=255 required><br>
|
||||
Default effect intensity: <input name=IX type=number min=0 max=255 required><br><br>
|
||||
Use Gamma correction for color: <input type=checkbox name=GC> (strongly recommended)<br>
|
||||
Use Gamma correction for brightness: <input type=checkbox name=GB> (not recommended)<br><br>
|
||||
Brightness factor: <input name=BF type=number min=1 max=255 required> %
|
||||
<h3>Transitions</h3>
|
||||
Crossfade: <input type="checkbox" name="TF"><br>
|
||||
Transition Time: <input name="TD" maxlength="5" size="2"> ms<br>
|
||||
Enable transition for secondary color: <input type="checkbox" name="T2"><br>
|
||||
Enable Palette transitions: <input type="checkbox" name="PF">
|
||||
Crossfade: <input type=checkbox name=TF><br>
|
||||
Transition Time: <input name=TD maxlength=5 size=2> ms<br>
|
||||
Enable transition for secondary color: <input type=checkbox name=T2><br>
|
||||
Enable Palette transitions: <input type=checkbox name=PF>
|
||||
<h3>Timed light</h3>
|
||||
Default Duration: <input name="TL" type="number" min="1" max="255" required> min<br>
|
||||
Default Target brightness: <input name="TB" type="number" min="0" max="255" required><br>
|
||||
Fade down: <input type="checkbox" name="TW"><br>
|
||||
Default Duration: <input name=TL type=number min=1 max=255 required> min<br>
|
||||
Default Target brightness: <input name=TB type=number min=0 max=255 required><br>
|
||||
Fade down: <input type=checkbox name=TW><br>
|
||||
<h3>Advanced</h3>
|
||||
Palette blending:
|
||||
<select name="PB">
|
||||
<option value="0">Linear (wrap if moving)</option>
|
||||
<option value="1">Linear (always wrap)</option>
|
||||
<option value="2">Linear (never wrap)</option>
|
||||
<option value="3">None (not recommended)</option>
|
||||
<select name=PB>
|
||||
<option value=0>Linear (wrap if moving)</option>
|
||||
<option value=1>Linear (always wrap)</option>
|
||||
<option value=2>Linear (never wrap)</option>
|
||||
<option value=3>None (not recommended)</option>
|
||||
</select><br>
|
||||
Reverse LED order (rotate 180): <input type="checkbox" name="RV"><br>
|
||||
Skip first LED: <input type="checkbox" name="SL"><hr>
|
||||
<button type="button" onclick="B()">Back</button><button type="submit">Save</button>
|
||||
</form>
|
||||
</body>
|
||||
Reverse LED order (rotate 180): <input type=checkbox name=RV><br>
|
||||
Skip first LED: <input type=checkbox name=SL><hr>
|
||||
<button type=button onclick=B()>Back</button><button type=submit>Save</button>
|
||||
</form></body>
|
||||
</html>)=====";
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -100,8 +100,8 @@
|
|||
|
||||
|
||||
//version code in format yymmddb (b = daily build)
|
||||
#define VERSION 1911102
|
||||
char versionString[] = "0.8.6";
|
||||
#define VERSION 1911121
|
||||
char versionString[] = "0.8.7-dev";
|
||||
|
||||
|
||||
//AP and OTA default passwords (for maximum change them!)
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@
|
|||
#define EEPSIZE 2560
|
||||
|
||||
//eeprom Version code, enables default settings instead of 0 init on update
|
||||
#define EEPVER 11
|
||||
#define EEPVER 12
|
||||
//0 -> old version, default
|
||||
//1 -> 0.4p 1711272 and up
|
||||
//2 -> 0.4p 1711302 and up
|
||||
|
|
@ -19,7 +19,7 @@
|
|||
//9 -> 0.8.0
|
||||
//10-> 0.8.2
|
||||
//11-> 0.8.5-dev #mqttauth @TimothyBrown
|
||||
|
||||
//12-> 0.8.7
|
||||
|
||||
/*
|
||||
* Erase all configuration data
|
||||
|
|
@ -134,7 +134,7 @@ void saveSettingsToEEPROM()
|
|||
EEPROM.write(372, useRGBW);
|
||||
EEPROM.write(373, effectPaletteDefault);
|
||||
EEPROM.write(374, strip.paletteFade);
|
||||
//EEPROM.write(375, apWaitTimeSecs);
|
||||
EEPROM.write(375, strip.milliampsPerLed); //was apWaitTimeSecs up to 0.8.5
|
||||
EEPROM.write(376, apBehavior);
|
||||
|
||||
EEPROM.write(377, EEPVER); //eeprom was updated to latest
|
||||
|
|
@ -363,11 +363,9 @@ void loadSettingsFromEEPROM(bool first)
|
|||
useRGBW = EEPROM.read(372);
|
||||
effectPaletteDefault = EEPROM.read(373); effectPalette = effectPaletteDefault;
|
||||
//374 - strip.paletteFade
|
||||
|
||||
if (lastEEPROMversion > 0) {
|
||||
//apWaitTimeSecs = EEPROM.read(375);
|
||||
apBehavior = EEPROM.read(376);
|
||||
}
|
||||
|
||||
apBehavior = EEPROM.read(376);
|
||||
|
||||
//377 = lastEEPROMversion
|
||||
if (lastEEPROMversion > 1) {
|
||||
for (byte i=0; i<4; i++)
|
||||
|
|
@ -485,6 +483,15 @@ void loadSettingsFromEEPROM(bool first)
|
|||
mqttPort = EEPROM.read(2522) + ((EEPROM.read(2523) << 8) & 0xFF00);
|
||||
}
|
||||
|
||||
if (lastEEPROMversion > 11)
|
||||
{
|
||||
strip.milliampsPerLed = EEPROM.read(375);
|
||||
} else if (strip.ablMilliampsMax == 65000) //65000 indicates disabled ABL in <0.8.7
|
||||
{
|
||||
strip.ablMilliampsMax = ABL_MILLIAMPS_DEFAULT;
|
||||
strip.milliampsPerLed = 0; //disable ABL
|
||||
}
|
||||
|
||||
receiveDirect = !EEPROM.read(2200);
|
||||
notifyMacro = EEPROM.read(2201);
|
||||
uiConfiguration = EEPROM.read(2202);
|
||||
|
|
|
|||
|
|
@ -223,8 +223,14 @@ void getSettingsJS(byte subPage, char* dest)
|
|||
}
|
||||
|
||||
if (subPage == 2) {
|
||||
#ifdef ESP8266
|
||||
#if LEDPIN == 3
|
||||
oappend("d.Sf.LC.max=500;");
|
||||
#endif
|
||||
#endif
|
||||
sappend('v',"LC",ledCount);
|
||||
sappend('v',"MA",strip.ablMilliampsMax);
|
||||
sappend('v',"LA",strip.milliampsPerLed);
|
||||
if (strip.currentMilliamps)
|
||||
{
|
||||
sappends('m',"(\"pow\")[0]","");
|
||||
|
|
|
|||
|
|
@ -56,12 +56,14 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
|
|||
{
|
||||
int t = request->arg("LC").toInt();
|
||||
if (t > 0 && t <= MAX_LEDS) ledCount = t;
|
||||
#ifndef ARDUINO_ARCH_ESP32
|
||||
#ifdef ESP8266
|
||||
#if LEDPIN == 3
|
||||
if (ledCount > MAX_LEDS_DMA) ledCount = MAX_LEDS_DMA; //DMA method uses too much ram
|
||||
#endif
|
||||
#endif
|
||||
strip.ablMilliampsMax = request->arg("MA").toInt();
|
||||
strip.milliampsPerLed = request->arg("LA").toInt();
|
||||
|
||||
useRGBW = request->hasArg("EW");
|
||||
strip.colorOrder = request->arg("CO").toInt();
|
||||
autoRGBtoRGBW = request->hasArg("AW");
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ void wledInit()
|
|||
EEPROM.begin(EEPSIZE);
|
||||
ledCount = EEPROM.read(229) + ((EEPROM.read(398) << 8) & 0xFF00);
|
||||
if (ledCount > MAX_LEDS || ledCount == 0) ledCount = 30;
|
||||
#ifndef ARDUINO_ARCH_ESP32
|
||||
#ifdef ESP8266
|
||||
#if LEDPIN == 3
|
||||
if (ledCount > MAX_LEDS_DMA) ledCount = MAX_LEDS_DMA; //DMA method uses too much ram
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -158,7 +158,7 @@ void initServer()
|
|||
},[](AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final){
|
||||
if(!index){
|
||||
DEBUG_PRINTLN("OTA Update Start");
|
||||
#ifndef ARDUINO_ARCH_ESP32
|
||||
#ifdef ESP8266
|
||||
Update.runAsync(true);
|
||||
#endif
|
||||
Update.begin((ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000);
|
||||
|
|
@ -312,7 +312,7 @@ String msgProcessor(const String& var)
|
|||
|
||||
void serveMessage(AsyncWebServerRequest* request, uint16_t code, String headl, String subl="", byte optionT=255)
|
||||
{
|
||||
#ifndef ARDUINO_ARCH_ESP32
|
||||
#ifdef ESP8266
|
||||
char buf[256];
|
||||
obuf = buf;
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -238,7 +238,7 @@ void serializeInfo(JsonObject root)
|
|||
|
||||
root["brand"] = "WLED";
|
||||
root["product"] = "DIY light";
|
||||
root["btype"] = "src";
|
||||
root["btype"] = "dev";
|
||||
root["mac"] = escapedMac;
|
||||
}
|
||||
|
||||
|
|
|
|||
Ładowanie…
Reference in New Issue