Fixed transitions and gamma

wled00/NpbWrapper.h

@@ -6,7 +6,7 @@
 #define LEDPIN 2  //strip pin. Any for ESP32, gpio2 or 3 is recommended for ESP8266 (gpio2/3 are labeled D4/RX on NodeMCU and Wemos)
 //#define USE_APA102 // Uncomment for using APA102 LEDs.
 #define BTNPIN 0  //button pin. Needs to have pullup (gpio0 recommended)
-#define IR_PIN -1 //infrared pin (-1 to disable)
+#define IR_PIN 4 //infrared pin (-1 to disable)
 #define RLYPIN 12 //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
 #define AUXPIN -1 //debug auxiliary output pin (-1 to disable)
 

wled00/WS2812FX_fcn.cpp

@@ -350,8 +350,9 @@ void WS2812FX::setColor(uint8_t slot, uint32_t c) {
 
 void WS2812FX::setBrightness(uint8_t b) {
   if (_brightness == b) return;
-  _brightness = gammaCorrectBri ? gamma8(b) : b;
-  if (SEGENV.next_time > millis() + 20) show(); //apply brightness change immediately if no refresh soon
+  _brightness = (gammaCorrectBri) ? gamma8(b) : b;
+  _segment_index = 0;
+  if (SEGENV.next_time > millis() + 22) show();//apply brightness change immediately if no refresh soon
 }
 
 uint8_t WS2812FX::getMode(void) {
@@ -535,6 +536,7 @@ void WS2812FX::unlockAll()
 
 void WS2812FX::setTransitionMode(bool t)
 {
+  _segment_index = 0;
   SEGMENT.setOption(7,t);
   if (!t) return;
   unsigned long waitMax = millis() + 20; //refresh after 20 ms if transition enabled
@@ -779,7 +781,7 @@ void WS2812FX::handle_palette(void)
 
 uint32_t WS2812FX::color_from_palette(uint16_t i, bool mapping, bool wrap, uint8_t mcol, uint8_t pbri)
 {
-  if (SEGMENT.palette == 0 && mcol < 3) return SEGMENT.colors[mcol]; //WS2812FX default
+  if (SEGMENT.palette == 0 && mcol < 3) return SEGCOLOR(mcol); //WS2812FX default
   uint8_t paletteIndex = i;
   if (mapping) paletteIndex = map(i,SEGMENT.start,SEGMENT.stop-1,0,255);
   if (!wrap) paletteIndex = scale8(paletteIndex, 240); //cut off blend at palette "end"

wled00/data/welcome.htm

@@ -17,9 +17,6 @@
     button {
       outline: none;
       cursor: pointer;
-    }
-    
-    .btn {
       padding: 8px;
       margin: 10px;
       width: 230px;
@@ -49,9 +46,9 @@
 If you encounter a bug or have a question/feature suggestion, feel free to open a GitHub issue!<br><br>
 <b>Next steps:</b><br><br>
 Connect the module to your local WiFi here!<br>
-<button class="btn" onclick="window.location.href='/settings/wifi'">WiFi settings</button><br>
+<button onclick="window.location.href='/settings/wifi'">WiFi settings</button><br>
 <i>Just trying this out in AP mode?</i><br>
-<button class="btn" onclick="window.location.href='/sliders'">To the controls!</button>
+<button onclick="window.location.href='/sliders'">To the controls!</button>
 
 </body>
 </html>

wled00/wled00.ino

@@ -98,7 +98,7 @@
 
 
 //version code in format yymmddb (b = daily build)
-#define VERSION 1909122
+#define VERSION 1909194
 char versionString[] = "0.8.5";
 
 

wled00/wled03_set.ino

@@ -111,6 +111,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
     nightlightTargetBri = request->arg("TB").toInt();
     t = request->arg("TL").toInt();
     if (t > 0) nightlightDelayMinsDefault = t;
+    nightlightDelayMins = nightlightDelayMinsDefault;
     nightlightFade = request->hasArg("TW");
 
     t = request->arg("PB").toInt();

wled00/wled05_init.ino

@@ -148,8 +148,6 @@ void wledInit()
 void beginStrip()
 {
   // Initialize NeoPixel Strip and button
-  strip.setColor(0, 0);
-  strip.setBrightness(255);
 
 #ifdef BTNPIN
   pinMode(BTNPIN, INPUT_PULLUP);