Auto-create segments based on configured busses

tools/WLED_ESP32_16MB.csv

@@ -0,0 +1,6 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x200000,
+app1,     app,  ota_1,   0x210000,0x200000,
+spiffs,   data, spiffs,  0x410000,0xBE0000,

usermods/EXAMPLE_v2/usermod_v2_example.h

@@ -137,7 +137,9 @@ class MyExampleUsermod : public Usermod {
     void readFromConfig(JsonObject& root)
     {
       JsonObject top = root["top"];
-      userVar0 = top["great"] | 42; //The value right of the pipe "|" is the default value in case your setting was not present in cfg.json (e.g. first boot)
+      if (!top.isNull()) {
+        userVar0 = top["great"] | 42; //The value right of the pipe "|" is the default value in case your setting was not present in cfg.json (e.g. first boot)
+      }
     }
 
    

wled00/FX.h

@@ -801,7 +801,7 @@ class WS2812FX {
     CRGBPalette16 currentPalette;
     CRGBPalette16 targetPalette;
 
-    uint16_t _length, _lengthRaw, _virtualSegmentLength;
+    uint16_t _length, _virtualSegmentLength;
     uint16_t _rand16seed;
     uint8_t _brightness;
     uint16_t _usedSegmentData = 0;

wled00/FX_fcn.cpp

@@ -60,12 +60,15 @@
   #define DEFAULT_LED_TYPE TYPE_WS2812_RGB
 #endif
 
+#if MAX_NUM_SEGMENTS < WLED_MAX_BUSSES
+  #error "Max segments must be at least max number of busses!"
+#endif
+
 //do not call this method from system context (network callback)
 void WS2812FX::finalizeInit(uint16_t countPixels)
 {
   RESET_RUNTIME;
   _length = countPixels;
-  _lengthRaw = _length;
 
   //if busses failed to load, add default (FS issue...)
   if (busses.getNumBusses() == 0) {
@@ -77,7 +80,7 @@ void WS2812FX::finalizeInit(uint16_t countPixels)
     for (uint8_t i = 0; i < defNumBusses; i++) {
       uint8_t defPin[] = {defDataPins[i]};
       uint16_t start = prevLen;
-      uint16_t count = _lengthRaw;
+      uint16_t count = _length;
       if (defNumBusses > 1 && defNumCounts) {
         count = defCounts[(i < defNumCounts) ? i : defNumCounts -1];
       }
@@ -89,22 +92,44 @@ void WS2812FX::finalizeInit(uint16_t countPixels)
   
   deserializeMap();
 
-  //make segment 0 cover the entire strip
-  _segments[0].start = 0;
-  _segments[0].stop = _length;
+  uint16_t segStarts[MAX_NUM_SEGMENTS] = {0};
+  uint16_t segStops [MAX_NUM_SEGMENTS] = {0};
 
   setBrightness(_brightness);
 
-  #ifdef ESP8266
+  //TODO make sure segments are only refreshed when bus config actually changed (new settings page)
+  //make one segment per bus
+  uint8_t s = 0;
   for (uint8_t i = 0; i < busses.getNumBusses(); i++) {
     Bus* b = busses.getBus(i);
+
+    segStarts[s] = b->getStart();
+    segStops[s] = segStarts[s] + b->getLength();
+
+    //check for overlap with previous segments
+    for (uint8_t j = 0; j < s; j++) {
+      if (segStops[j] > segStarts[s] && segStarts[j] < segStops[s]) {
+        //segments overlap, merge
+        segStarts[j] = min(segStarts[s],segStarts[j]);
+        segStops [j] = max(segStops [s],segStops [j]); segStops[s] = 0;
+        s--;
+      }
+    }
+    s++;
+
+    #ifdef ESP8266
     if ((!IS_DIGITAL(b->getType()) || IS_2PIN(b->getType()))) continue;
     uint8_t pins[5];
     b->getPins(pins);
     BusDigital* bd = static_cast<BusDigital*>(b);
     if (pins[0] == 3) bd->reinit();
+    #endif
+  }
+
+  for (uint8_t i = 0; i < MAX_NUM_SEGMENTS; i++) {
+    _segments[i].start = segStarts[i];
+    _segments[i].stop  = segStops [i];
   }
-  #endif
 }
 
 void WS2812FX::service() {
@@ -503,7 +528,7 @@ uint32_t WS2812FX::getPixelColor(uint16_t i)
   
   if (i < customMappingSize) i = customMappingTable[i];
   
-  if (i >= _lengthRaw) return 0;
+  if (i >= _length) return 0;
   
   return busses.getPixelColor(i);
 }

wled00/wled.h

@@ -8,7 +8,7 @@
  */
 
 // version code in format yymmddb (b = daily build)
-#define VERSION 2106200
+#define VERSION 2106240
 
 //uncomment this if you have a "my_config.h" file you'd like to use
 //#define WLED_USE_MY_CONFIG