Add DIY PCB SHOJO_PCB analog

platformio.ini

@@ -36,6 +36,7 @@ default_envs = d1_mini, esp01, esp01_1m_ota, esp32dev
 ; default_envs = esp8285_4CH_MagicHome
 ; default_envs = esp8285_4CH_H801
 ; default_envs = esp8285_5CH_H801
+; default_envs = d1_mini_5CH_Shojo_PCB
 
 [common]
 # ------------------------------------------------------------------------------
@@ -240,6 +241,12 @@ platform = ${common.platform_latest}
 board_build.ldscript = ${common.ldscript_1m0m}
 build_flags = ${common.build_flags_esp8266} -D WLED_DISABLE_HUESYNC -D WLED_USE_ANALOG_LEDS -D WLED_USE_H801 -D WLED_ENABLE_5CH_LEDS 
 
+[env:d1_mini_5CH_Shojo_PCB]
+board = d1_mini
+platform = ${common.platform_latest}
+board_build.ldscript = ${common.ldscript_4m1m}
+build_flags = ${common.build_flags_esp8266} -D WLED_USE_ANALOG_LEDS -D SHOJO_PCB -D WLED_ENABLE_5CH_LEDS 
+
 # ------------------------------------------------------------------------------
 # DEVELOPMENT BOARDS
 # ------------------------------------------------------------------------------

wled00/NpbWrapper.h

@@ -62,6 +62,13 @@
     #define GPIN 4   //G pin for analog LED strip
     #define BPIN 14  //B pin for analog LED strip
     #define WPIN 5   //W pin for analog LED strip
+  #elif defined(SHOJO_PCB)
+  //PWM pins - to use with Shojo PCB (https://www.bastelbunker.de/esp-rgbww-wifi-led-controller-vbs-edition/)
+    #define RPIN 14  //R pin for analog LED strip
+    #define GPIN 4   //G pin for analog LED strip
+    #define BPIN 5   //B pin for analog LED strip
+    #define WPIN 15  //W pin for analog LED strip
+    #define W2PIN 12 //W2 pin for analog LED strip
   #else
   //PWM pins - PINs 5,12,13,15 are used with Magic Home LED Controller
     #define RPIN 5   //R pin for analog LED strip