mirror
/
WLED
kopia lustrzana https://github.com/Aircoookie/WLED
1
0
Forkuj 0
Kod Zgłoszenia Packages Projekty Wydania Wiki Aktywność

Percent Effect from both ends of the strip (#660) 

from 0 to 100 the strip will get color(0) starting at the ESP, from 200 to 100 to strip will do it the other way around.

So, when using this effect for the staircase usermod, a person entering area near the ESP would set an intensity starting with 1 and getting bigger and leaving on the other side would need to further increase the intensity until 200. then the strip has color(1) again.
pull/664/head
Def3nder 2020-02-06 01:36:01 +01:00 zatwierdzone przez GitHub
rodzic ca1f25ecf6
commit 06a5c1a798
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 24 dodań i 11 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

35
wled00/FX.cpp
Wyświetl plik

@ -3013,21 +3013,34 @@ uint16_t WS2812FX::mode_plasma(void) {
*/
uint16_t WS2812FX::mode_percent(void) {
uint8_t percent = max(0, min(100, SEGMENT.intensity));
uint16_t active_leds = SEGLEN * percent / 100.0;
uint8_t percent = max(0, min(200, SEGMENT.intensity));
uint16_t active_leds = (percent < 100) ? SEGLEN * percent / 100.0
: SEGLEN * (200 - percent) / 100.0;
if (SEGENV.call == 0) SEGENV.step = 0;
uint8_t size = (1 + ((SEGMENT.speed * SEGLEN) >> 11)) & 0xFF ;
for (uint16_t i = 0; i < SEGLEN; i++) {
if (i < SEGENV.step) {
setPixelColor(i, color_from_palette(i, true, PALETTE_SOLID_WRAP, 0));
}
else {
setPixelColor(i, SEGCOLOR(1));
}
}
if(active_leds > SEGENV.step) {
if (percent < 100) {
for (uint16_t i = 0; i < SEGLEN; i++) {
if (i < SEGENV.step) {
setPixelColor(i, color_from_palette(i, true, PALETTE_SOLID_WRAP, 0));
}
else {
setPixelColor(i, SEGCOLOR(1));
}
}
} else {
for (uint16_t i = 0; i < SEGLEN; i++) {
if (i < (SEGLEN - SEGENV.step)) {
setPixelColor(i, SEGCOLOR(1));
}
else {
setPixelColor(i, color_from_palette(i, true, PALETTE_SOLID_WRAP, 0));
}
}
}
if(active_leds > SEGENV.step) { // smooth transition to the target value
SEGENV.step += size;
if (SEGENV.step > active_leds) SEGENV.step = active_leds;
} else if (active_leds < SEGENV.step) {