WLED/usermods/LD2410_v2/readme.md

# BH1750 usermod

> This usermod requires a second UART and was only tested on the ESP32


This usermod will read from a LD2410 movement/presence sensor.

The movement and presence state are displayed in both the Info section of the web UI, as well as published to the `/movement` and `/stationary` MQTT topics respectively.

## Dependencies
- Libraries
  - `ncmreynolds/ld2410@^0.1.3`
  - This must be added under `lib_deps` in your `platformio.ini` (or `platformio_override.ini`).
- Data is published over MQTT - make sure you've enabled the MQTT sync interface.

## Compilation

To enable, compile with `USERMOD_LD2410` defined  (e.g. in `platformio_override.ini`)
```ini
[env:usermod_USERMOD_LD2410_esp32dev]
extends = env:esp32dev
build_flags =
    ${common.build_flags_esp32}
    -D USERMOD_LD2410
lib_deps = 
    ${esp32.lib_deps}
    ncmreynolds/ld2410@^0.1.3
```

### Configuration Options
The Usermod screen allows you to:
- enable/disable the usermod
- Configure the RX/TX pins

## Change log
-  2024-06 Created by @wesleygas (https://github.com/wesleygas/)